From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
This patch adds the function can_skb_get_frame_len() which returns the length
of a CAN frame on the data link layer, including Start-of-frame, Identifier,
various other bits, the actual data, the CRC, the End-of-frame, the Inter frame
spacing.
Co-developed-by: Arunachalam Santhanam <arunachalam.santhanam@xxxxxxxxxxxx>
Signed-off-by: Arunachalam Santhanam <arunachalam.santhanam@xxxxxxxxxxxx>
Co-developed-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
Acked-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
Co-developed-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
drivers/net/can/dev/length.c | 50 +++++++++++++++
include/linux/can/length.h | 120 +++++++++++++++++++++++++++++++++++
2 files changed, 170 insertions(+)
diff --git a/drivers/net/can/dev/length.c b/drivers/net/can/dev/length.c
index d695a3bee1ed..20cd153a45a5 100644
--- a/drivers/net/can/dev/length.c
+++ b/drivers/net/can/dev/length.c
@@ -38,3 +38,53 @@ u8 can_fd_len2dlc(u8 len)
return len2dlc[len];
}
EXPORT_SYMBOL_GPL(can_fd_len2dlc);
+
+/**
+ * can_skb_get_frame_len() - Calculate the CAN Frame length in bytes
+ * of a given skb.
+ * @skb: socket buffer of a CAN message.
+ *
+ * Do a rough calculation: bit stuffing is ignored and length in bits
+ * is rounded up to a length in bytes.
+ *
+ * Rationale: this function is to be used for the BQL functions
+ * (netdev_sent_queue() and netdev_completed_queue()) which expect a
+ * value in bytes. Just using skb->len is insufficient because it will
+ * return the constant value of CAN(FD)_MTU. Doing the bit stuffing
+ * calculation would be too expensive in term of computing resources
+ * for no noticeable gain.
+ *
+ * Remarks: The payload of CAN FD frames with BRS flag are sent at a
+ * different bitrate. Currently, the can-utils canbusload tool does
+ * not support CAN-FD yet and so we could not run any benchmark to
+ * measure the impact. There might be possible improvement here.
+ *
+ * Return: length in bytes.
+ */
+unsigned int can_skb_get_frame_len(const struct sk_buff *skb)
+{
+ const struct canfd_frame *cf = (const struct canfd_frame *)skb->data;
+ u8 len;
+
+ if (can_is_canfd_skb(skb))
+ len = canfd_sanitize_len(cf->len);
+ else if (cf->can_id & CAN_RTR_FLAG)
+ len = 0;
+ else
+ len = cf->len;
+
+ if (can_is_canfd_skb(skb)) {
+ if (cf->can_id & CAN_EFF_FLAG)
+ len += CANFD_FRAME_OVERHEAD_EFF;
+ else
+ len += CANFD_FRAME_OVERHEAD_SFF;
+ } else {
+ if (cf->can_id & CAN_EFF_FLAG)
+ len += CAN_FRAME_OVERHEAD_EFF;
+ else
+ len += CAN_FRAME_OVERHEAD_SFF;
+ }
+
+ return len;
+}
+EXPORT_SYMBOL_GPL(can_skb_get_frame_len);
diff --git a/include/linux/can/length.h b/include/linux/can/length.h
index b2313b2a0b02..6995092b774e 100644
--- a/include/linux/can/length.h
+++ b/include/linux/can/length.h
@@ -1,10 +1,127 @@
/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright (C) 2020 Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
+ * Copyright (C) 2020 Marc Kleine-Budde <kernel@xxxxxxxxxxxxxx>
*/
#ifndef _CAN_LENGTH_H
#define _CAN_LENGTH_H
+/*
+ * Size of a Classical CAN Standard Frame
+ *
+ * Name of Field Bits
+ * ---------------------------------------------------------
+ * Start-of-frame 1
+ * Identifier 11
+ * Remote transmission request (RTR) 1
+ * Identifier extension bit (IDE) 1
+ * Reserved bit (r0) 1
+ * Data length code (DLC) 4
+ * Data field 0...64
+ * CRC 15
+ * CRC delimiter 1
+ * ACK slot 1
+ * ACK delimiter 1
+ * End-of-frame (EOF) 7
+ * Inter frame spacing 3
+ *
+ * rounded up and ignoring bitstuffing
+ */
+#define CAN_FRAME_OVERHEAD_SFF DIV_ROUND_UP(47, 8)
+
+/*
+ * Size of a Classical CAN Extended Frame
+ *
+ * Name of Field Bits
+ * ---------------------------------------------------------
+ * Start-of-frame 1
+ * Identifier A 11
+ * Substitute remote request (SRR) 1
+ * Identifier extension bit (IDE) 1
+ * Identifier B 18
+ * Remote transmission request (RTR) 1
+ * Reserved bits (r1, r0) 2
+ * Data length code (DLC) 4
+ * Data field 0...64
+ * CRC 15
+ * CRC delimiter 1
+ * ACK slot 1
+ * ACK delimiter 1
+ * End-of-frame (EOF) 7
+ * Inter frame spacing 3
+ *
+ * rounded up and ignoring bitstuffing
+ */
+#define CAN_FRAME_OVERHEAD_EFF DIV_ROUND_UP(67, 8)
+
+/*
+ * Size of a CAN-FD Standard Frame
+ *
+ * Name of Field Bits
+ * ---------------------------------------------------------
+ * Start-of-frame 1
+ * Identifier 11
+ * Reserved bit (r1) 1
+ * Identifier extension bit (IDE) 1
+ * Flexible data rate format (FDF) 1
+ * Reserved bit (r0) 1
+ * Bit Rate Switch (BRS) 1
+ * Error Status Indicator (ESI) 1
+ * Data length code (DLC) 4
+ * Data field 0...512
+ * Stuff Bit Count (SBC) 0...16: 4 20...64:5
+ * CRC 0...16: 17 20...64:21
+ * CRC delimiter (CD) 1
+ * ACK slot (AS) 1
+ * ACK delimiter (AD) 1
+ * End-of-frame (EOF) 7
+ * Inter frame spacing 3
+ *
+ * assuming CRC21, rounded up and ignoring bitstuffing
+ */
+#define CANFD_FRAME_OVERHEAD_SFF DIV_ROUND_UP(61, 8)
+
+/*
+ * Size of a CAN-FD Extended Frame
+ *
+ * Name of Field Bits
+ * ---------------------------------------------------------
+ * Start-of-frame 1
+ * Identifier A 11
+ * Substitute remote request (SRR) 1
+ * Identifier extension bit (IDE) 1
+ * Identifier B 18
+ * Reserved bit (r1) 1
+ * Flexible data rate format (FDF) 1
+ * Reserved bit (r0) 1
+ * Bit Rate Switch (BRS) 1
+ * Error Status Indicator (ESI) 1
+ * Data length code (DLC) 4
+ * Data field 0...512
+ * Stuff Bit Count (SBC) 0...16: 4 20...64:5
+ * CRC 0...16: 17 20...64:21
+ * CRC delimiter (CD) 1
+ * ACK slot (AS) 1
+ * ACK delimiter (AD) 1
+ * End-of-frame (EOF) 7
+ * Inter frame spacing 3
+ *
+ * assuming CRC21, rounded up and ignoring bitstuffing
+ */
+#define CANFD_FRAME_OVERHEAD_EFF DIV_ROUND_UP(80, 8)
+
+/*
+ * Maximum size of a Classical CAN frame
+ * (rounded up and ignoring bitstuffing)
+ */
+#define CAN_FRAME_LEN_MAX (CAN_FRAME_OVERHEAD_EFF + CAN_MAX_DLEN)
+
+/*
+ * Maximum size of a CAN-FD frame
+ * (rounded up and ignoring bitstuffing)
+ */
+#define CANFD_FRAME_LEN_MAX (CANFD_FRAME_OVERHEAD_EFF + CANFD_MAX_DLEN)
+
/*
* can_cc_dlc2len(value) - convert a given data length code (dlc) of a
* Classical CAN frame into a valid data length of max. 8 bytes.
@@ -45,6 +162,9 @@ u8 can_fd_dlc2len(u8 dlc);
/* map the sanitized data length to an appropriate data length code */
u8 can_fd_len2dlc(u8 len);
+/* calculate the CAN Frame length in bytes of a given skb */
+unsigned int can_skb_get_frame_len(const struct sk_buff *skb);
+
/* map the data length to an appropriate data link layer length */
static inline u8 canfd_sanitize_len(u8 len)
{
--
2.29.2
