The rcar_canfd driver supports R-Car Gen3 and RZ/G2 SoC's, update the description to reflect this. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- drivers/net/can/rcar/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/rcar/Kconfig b/drivers/net/can/rcar/Kconfig index 6bb0e7c052ad..a669b9ac8057 100644 --- a/drivers/net/can/rcar/Kconfig +++ b/drivers/net/can/rcar/Kconfig @@ -10,13 +10,13 @@ config CAN_RCAR be called rcar_can. config CAN_RCAR_CANFD - tristate "Renesas R-Car CAN FD controller" + tristate "Renesas R-Car Gen3 and RZ/G2 CAN FD controller" depends on ARCH_RENESAS || ARM help Say Y here if you want to use CAN FD controller found on - Renesas R-Car SoCs. The driver puts the controller in CAN FD only - mode, which can interoperate with CAN2.0 nodes but does not support - dedicated CAN 2.0 mode. + Renesas R-Car Gen3 and RZ/G2 SoCs. The driver puts the + controller in CAN FD only mode, which can interoperate with + CAN2.0 nodes but does not support dedicated CAN 2.0 mode. To compile this driver as a module, choose M here: the module will be called rcar_canfd. -- 2.17.1
