According to the TCAN4550 datasheet "SLLSF91 - DECEMBER 2018" the tcan4x5x has
the same bittiming constants as a m_can revision 3.2.x/3.3.0.
The tcan4x5x chip I'm using identifies itself as m_can revision 3.2.1, so
remove the tcan4x5x specific bittiming values and rely on the values in the
m_can driver, which are selected according to core revision.
Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: Dan Murphy <dmurphy@xxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
drivers/net/can/m_can/tcan4x5x.c | 26 --------------------------
1 file changed, 26 deletions(-)
diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c
index 7347ab39c5b6..f726c5112294 100644
--- a/drivers/net/can/m_can/tcan4x5x.c
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -129,30 +129,6 @@ struct tcan4x5x_priv {
int reg_offset;
};
-static struct can_bittiming_const tcan4x5x_bittiming_const = {
- .name = DEVICE_NAME,
- .tseg1_min = 2,
- .tseg1_max = 31,
- .tseg2_min = 2,
- .tseg2_max = 16,
- .sjw_max = 16,
- .brp_min = 1,
- .brp_max = 32,
- .brp_inc = 1,
-};
-
-static struct can_bittiming_const tcan4x5x_data_bittiming_const = {
- .name = DEVICE_NAME,
- .tseg1_min = 1,
- .tseg1_max = 32,
- .tseg2_min = 1,
- .tseg2_max = 16,
- .sjw_max = 16,
- .brp_min = 1,
- .brp_max = 32,
- .brp_inc = 1,
-};
-
static void tcan4x5x_check_wake(struct tcan4x5x_priv *priv)
{
int wake_state = 0;
@@ -479,8 +455,6 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
mcan_class->dev = &spi->dev;
mcan_class->ops = &tcan4x5x_ops;
mcan_class->is_peripheral = true;
- mcan_class->bit_timing = &tcan4x5x_bittiming_const;
- mcan_class->data_timing = &tcan4x5x_data_bittiming_const;
mcan_class->net->irq = spi->irq;
spi_set_drvdata(spi, priv);
--
2.29.2
