The clocks mcan_class->cclk and mcan_class->hclk are not prepared by any call
during tcan4x5x_can_probe(), so remove erroneous clk_disable_unprepare() on
them.
Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Link: http://lore.kernel.org/r/20201130114252.215334-1-mkl@xxxxxxxxxxxxxx
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
drivers/net/can/m_can/tcan4x5x.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c
index e5d7d85e0b6d..7347ab39c5b6 100644
--- a/drivers/net/can/m_can/tcan4x5x.c
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -489,18 +489,18 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
spi->bits_per_word = 32;
ret = spi_setup(spi);
if (ret)
- goto out_clk;
+ goto out_m_can_class_free_dev;
priv->regmap = devm_regmap_init(&spi->dev, &tcan4x5x_bus,
&spi->dev, &tcan4x5x_regmap);
if (IS_ERR(priv->regmap)) {
ret = PTR_ERR(priv->regmap);
- goto out_clk;
+ goto out_m_can_class_free_dev;
}
ret = tcan4x5x_power_enable(priv->power, 1);
if (ret)
- goto out_clk;
+ goto out_m_can_class_free_dev;
ret = tcan4x5x_parse_config(mcan_class);
if (ret)
@@ -519,11 +519,6 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
out_power:
tcan4x5x_power_enable(priv->power, 0);
-out_clk:
- if (!IS_ERR(mcan_class->cclk)) {
- clk_disable_unprepare(mcan_class->cclk);
- clk_disable_unprepare(mcan_class->hclk);
- }
out_m_can_class_free_dev:
m_can_class_free_dev(mcan_class->net);
dev_err(&spi->dev, "Probe failed, err=%d\n", ret);
base-commit: 4d521943f76bd0d1e68ea5e02df7aadd30b2838a
--
2.29.2
