Hi all, I am trying to use a tcan4550 together with a Raspberry PI 3 B. I am using the tcan4x5x driver from net-next. I always get the following error during startup. tcan4x5x spi0.0: Probe failed, err=-22 tcan4x5x: probe of spi0.0 failed with error -22 I realized that this happens because the Raspberry PI does only support 8/9 bit words. https://elinux.org/index.php?title=RPi_SPI#Supported_bits_per_word In the driver it is set to 32. spi->bits_per_word = 32; Setting this to 8 does not help of course since the tcan chip expects a multiple of 32 per spi transaction. I don't know if this is a Raspberry Pi specific problem or if there are more devices with this hardware limitation. Does anyone have a workaround for that? If this a common issue it might be a good idea to patch the driver. I will check if I can find proper a way to do so. Regards, Konstantin
