[PATCH v2 2/4] can: flexcan: move can set bititings after module control

[Pankaj Bansal <pankaj.bansal@xxxxxxx>]

The can bitimings are affected by bits set in CAN MCR register.
Therefore, move the setbititings after MCR register has been set.

Signed-off-by: Pankaj Bansal <pankaj.bansal@xxxxxxx>
---

Notes:
    V2:
    - No change

 drivers/net/can/flexcan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 931efffb8fa2..f093d8a15bb2 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1034,8 +1034,6 @@ static int flexcan_chip_start(struct net_device *dev)
 	if (err)
 		goto out_chip_disable;
 
-	flexcan_set_bittiming(dev);
-
 	/* MCR
 	 *
 	 * enable freeze
@@ -1083,6 +1081,8 @@ static int flexcan_chip_start(struct net_device *dev)
 	netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr);
 	priv->write(reg_mcr, &regs->mcr);
 
+	flexcan_set_bittiming(dev);
+
 	/* CTRL
 	 *
 	 * disable timer sync feature
-- 
2.17.1