[PATCH v12 5/5] can: m_can: Fix checkpatch issues on existing code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix checkpatch issues found during the m_can framework creation.
The code the issues were in, was in untouched code and these
changes should be done separately as to not be confused with the
framework changes.

Fix these 3 check issues:
CHECK: Unnecessary parentheses around 'cdev->can.state != CAN_STATE_ERROR_WARNING'
	if (psr & PSR_EW &&
	    (cdev->can.state != CAN_STATE_ERROR_WARNING)) {

CHECK: Unnecessary parentheses around 'cdev->can.state != CAN_STATE_ERROR_PASSIVE'
	if ((psr & PSR_EP) &&
	    (cdev->can.state != CAN_STATE_ERROR_PASSIVE)) {

CHECK: Unnecessary parentheses around 'cdev->can.state != CAN_STATE_BUS_OFF'
	if ((psr & PSR_BO) &&
	    (cdev->can.state != CAN_STATE_BUS_OFF)) {

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---

v12 - No Changes - https://lore.kernel.org/patchwork/patch/1052304/

v11 - New change to clean up last remaining checkpatch issues on original code.

 drivers/net/can/m_can/m_can.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 923c53204d7d..ef4282a98fe1 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -733,22 +733,19 @@ static int m_can_handle_state_errors(struct net_device *dev, u32 psr)
 	struct m_can_classdev *cdev = netdev_priv(dev);
 	int work_done = 0;
 
-	if ((psr & PSR_EW) &&
-	    (cdev->can.state != CAN_STATE_ERROR_WARNING)) {
+	if (psr & PSR_EW && cdev->can.state != CAN_STATE_ERROR_WARNING) {
 		netdev_dbg(dev, "entered error warning state\n");
 		work_done += m_can_handle_state_change(dev,
 						       CAN_STATE_ERROR_WARNING);
 	}
 
-	if ((psr & PSR_EP) &&
-	    (cdev->can.state != CAN_STATE_ERROR_PASSIVE)) {
+	if (psr & PSR_EP && cdev->can.state != CAN_STATE_ERROR_PASSIVE) {
 		netdev_dbg(dev, "entered error passive state\n");
 		work_done += m_can_handle_state_change(dev,
 						       CAN_STATE_ERROR_PASSIVE);
 	}
 
-	if ((psr & PSR_BO) &&
-	    (cdev->can.state != CAN_STATE_BUS_OFF)) {
+	if (psr & PSR_BO && cdev->can.state != CAN_STATE_BUS_OFF) {
 		netdev_dbg(dev, "entered error bus off state\n");
 		work_done += m_can_handle_state_change(dev,
 						       CAN_STATE_BUS_OFF);
-- 
2.21.0.5.gaeb582a983




[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux