On 5/7/19 11:34 AM, Sean Nyekjaer wrote:
> Fully compatible with mcp2515, the mcp25625 have
> integrated transceiver.
>
> Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx>
I've mentioned the mcp25625 to the .in file and properly introduced the
mcp25625 as a new model in the driver itself. This way the debug output
is formated properly:
> netdev_info(net, "MCP%x successfully initialized.\n", priv->model);
This is how the patch looks like now:
From b1a45a5837c3501b75a9c542af809f80fe3dc0da Mon Sep 17 00:00:00 2001
From: Sean Nyekjaer <sean@xxxxxxxxxx>
Date: Tue, 7 May 2019 11:34:36 +0200
Subject: [PATCH] can: mcp251x: add support for mcp25625
Fully compatible with mcp2515, the mcp25625 have integrated transceiver.
This patch adds support for the mcp25625 to the existing mcp251x driver.
Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
drivers/net/can/spi/Kconfig | 5 +++--
drivers/net/can/spi/mcp251x.c | 25 ++++++++++++++++---------
2 files changed, 19 insertions(+), 11 deletions(-)
diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig
index 8f2e0dd7b756..792e9c6c4a2f 100644
--- a/drivers/net/can/spi/Kconfig
+++ b/drivers/net/can/spi/Kconfig
@@ -8,9 +8,10 @@ config CAN_HI311X
Driver for the Holt HI311x SPI CAN controllers.
config CAN_MCP251X
- tristate "Microchip MCP251x SPI CAN controllers"
+ tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
depends on HAS_DMA
---help---
- Driver for the Microchip MCP251x SPI CAN controllers.
+ Driver for the Microchip MCP251x and MCP25625 SPI CAN
+ controllers.
endmenu
diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index e90817608645..da64e71a62ee 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -1,5 +1,5 @@
/*
- * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ * CAN bus driver for Microchip 251x/25625 CAN Controller with SPI Interface
*
* MCP2510 support and bug fixes by Christian Pellegrin
* <chripell@xxxxxxxxxxxx>
@@ -41,7 +41,7 @@
* static struct spi_board_info spi_board_info[] = {
* {
* .modalias = "mcp2510",
- * // or "mcp2515" depending on your controller
+ * // "mcp2515" or "mcp25625" depending on your controller
* .platform_data = &mcp251x_info,
* .irq = IRQ_EINT13,
* .max_speed_hz = 2*1000*1000,
@@ -238,6 +238,7 @@ static const struct can_bittiming_const mcp251x_bittiming_const = {
enum mcp251x_model {
CAN_MCP251X_MCP2510 = 0x2510,
CAN_MCP251X_MCP2515 = 0x2515,
+ CAN_MCP251X_MCP25625 = 0x25625,
};
struct mcp251x_priv {
@@ -280,7 +281,6 @@ static inline int mcp251x_is_##_model(struct spi_device *spi) \
}
MCP251X_IS(2510);
-MCP251X_IS(2515);
static void mcp251x_clean(struct net_device *net)
{
@@ -639,7 +639,7 @@ static int mcp251x_hw_reset(struct spi_device *spi)
/* Wait for oscillator startup timer after reset */
mdelay(MCP251X_OST_DELAY_MS);
-
+
reg = mcp251x_read_reg(spi, CANSTAT);
if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
return -ENODEV;
@@ -820,9 +820,8 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
/* receive buffer 0 */
if (intf & CANINTF_RX0IF) {
mcp251x_hw_rx(spi, 0);
- /*
- * Free one buffer ASAP
- * (The MCP2515 does this automatically.)
+ /* Free one buffer ASAP
+ * (The MCP2515/25625 does this automatically.)
*/
if (mcp251x_is_2510(spi))
mcp251x_write_bits(spi, CANINTF, CANINTF_RX0IF, 0x00);
@@ -831,7 +830,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
/* receive buffer 1 */
if (intf & CANINTF_RX1IF) {
mcp251x_hw_rx(spi, 1);
- /* the MCP2515 does this automatically */
+ /* The MCP2515/25625 does this automatically. */
if (mcp251x_is_2510(spi))
clear_intf |= CANINTF_RX1IF;
}
@@ -1006,6 +1005,10 @@ static const struct of_device_id mcp251x_of_match[] = {
.compatible = "microchip,mcp2515",
.data = (void *)CAN_MCP251X_MCP2515,
},
+ {
+ .compatible = "microchip,mcp25625",
+ .data = (void *)CAN_MCP251X_MCP25625,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, mcp251x_of_match);
@@ -1019,6 +1022,10 @@ static const struct spi_device_id mcp251x_id_table[] = {
.name = "mcp2515",
.driver_data = (kernel_ulong_t)CAN_MCP251X_MCP2515,
},
+ {
+ .name = "mcp25625",
+ .driver_data = (kernel_ulong_t)CAN_MCP251X_MCP25625,
+ },
{ }
};
MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
@@ -1259,5 +1266,5 @@ module_spi_driver(mcp251x_can_driver);
MODULE_AUTHOR("Chris Elston <celston@xxxxxxxxxxx>, "
"Christian Pellegrin <chripell@xxxxxxxxxxxx>");
-MODULE_DESCRIPTION("Microchip 251x CAN driver");
+MODULE_DESCRIPTION("Microchip 251x/25625 CAN driver");
MODULE_LICENSE("GPL v2");
--
2.20.1
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Attachment:
signature.asc
Description: OpenPGP digital signature
