RE: [PATCH V2 0/5] can: flexcan: add CAN FD support on i.MX8QM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Ping...

Best Regards,
Joakim Zhang

> -----Original Message-----
> From: Joakim Zhang
> Sent: 2019年3月19日 13:17
> To: mkl@xxxxxxxxxxxxxx; linux-can@xxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>; wg@xxxxxxxxxxxxxx;
> netdev@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Joakim Zhang
> <qiangqing.zhang@xxxxxxx>
> Subject: [PATCH V2 0/5] can: flexcan: add CAN FD support on i.MX8QM
> 
> This patch set intends to add fd mode support on i.MX8QM platform.
> 
> Dong Aisheng (4):
>   can: rx-offload: add CANFD support based on offload
>   can: flexcan: add CAN FD mode support
>   can: flexcan: add CANFD BRS support and improve bittiming setting
>   can: flexcan: add imx8qm support
> 
> Joakim Zhang (1):
>   can: flexcan: add ISO CAN FD feature support
> 
>  drivers/net/can/flexcan.c      | 222 ++++++++++++++++++++++++++++-----
>  drivers/net/can/rx-offload.c   |  16 ++-
>  include/linux/can/rx-offload.h |   4 +-
>  3 files changed, 206 insertions(+), 36 deletions(-)
> 
> --
> 2.17.1





[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux