Re: [PATCH 4/4] leds: netdev trigger: allow setting initial values in device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rasmus,

Thank you for the patch set.

I have one comment below.

On 3/13/19 9:26 PM, Rasmus Villemoes wrote:
It can be quite convenient to initialize a netdev-triggered LED with a
device name and setting the rx,tx,link properties from device tree,
instead of having to do that in an init script in userspace.

My main motivation for this is to be able to switch away from the
deprecated CONFIG_CAN_LEDS, so add an example based on that and add a
pointer in the net/can/Kconfig file.

Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
---
  .../devicetree/bindings/leds/common.txt       | 17 ++++++++++
  drivers/leds/trigger/ledtrig-netdev.c         | 31 +++++++++++++++++++
  drivers/net/can/Kconfig                       |  3 +-
  3 files changed, 50 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 7cb88460a47c..4f3a97e73417 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -43,6 +43,23 @@ Optional properties for child nodes:
                  Documentation/ABI/testing/sysfs-class-led-trigger-netdev)
                  to reflect the state and activity of a net device.
+ The optional child node netdev can be used to
+                configure initial values for the link, rx, tx and
+                device_name properties. For example, setting
+                linux,default-trigger = "netdev" and adding the child
+                node
+
+                netdev {
+                    rx;
+                    tx;
+                    link;
+                    device-name = "can0";
+                };
+
+                can be used to replace 'linux,default-trigger =
+                "can0-rxtx"' that relies on the deprecated
+                CONFIG_CAN_LEDS.
+
  - led-pattern : Array of integers with default pattern for certain triggers.
                  Each trigger may parse this property differently:
                  - one-shot : two numbers specifying delay on and delay off (in ms),
diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 55153a7e8433..1f7c86df1e91 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -20,6 +20,7 @@
  #include <linux/list.h>
  #include <linux/module.h>
  #include <linux/netdevice.h>
+#include <linux/of.h>
  #include <linux/spinlock.h>
  #include <linux/timer.h>
  #include "../leds.h"
@@ -395,6 +396,35 @@ static void netdev_trig_work(struct work_struct *work)
  			(atomic_read(&trigger_data->interval)*2));
  }
+static void netdev_trig_of_init(struct led_classdev *led_cdev,
+				struct led_netdev_data *trigger_data)
+{
+	struct device_node *np = led_cdev->dev->of_node;
+	const char *device_name;
+
+	if (!np)
+		return;
+	np = of_get_child_by_name(np, "netdev");
+	if (!np)
+		return;
+
+	if (of_property_read_bool(np, "link"))
+		__set_bit(NETDEV_LED_LINK, &trigger_data->mode);
+	if (of_property_read_bool(np, "tx"))
+		__set_bit(NETDEV_LED_TX, &trigger_data->mode);
+	if (of_property_read_bool(np, "rx"))
+		__set_bit(NETDEV_LED_RX, &trigger_data->mode);
+	if (!of_property_read_string(np, "device-name", &device_name)) {
+		unsigned len = strlen(device_name);
+
+		if (len < IFNAMSIZ)
+			set_device(trigger_data, device_name, len);
+	}
+	set_baseline_state(trigger_data);
+
+	of_node_put(np);
+}
+
  static int netdev_trig_activate(struct led_classdev *led_cdev)
  {
  	struct led_netdev_data *trigger_data;
@@ -418,6 +448,7 @@ static int netdev_trig_activate(struct led_classdev *led_cdev)
  	trigger_data->mode = 0;
  	atomic_set(&trigger_data->interval, msecs_to_jiffies(50));
  	trigger_data->last_activity = 0;
+	netdev_trig_of_init(led_cdev, trigger_data);

You want to execute this only if recently introduced flag
LED_INIT_DEFAULT_TRIGGER is set. Please compare how
drivers/leds/trigger/ledtrig-pattern.c uses it.

led_set_trigger_data(led_cdev, trigger_data); diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index e0f0ad7a550a..91703a96b636 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -77,7 +77,8 @@ config CAN_LEDS
  	# everything that this driver is doing. This is marked as broken
  	# because it uses stuff that is intended to be changed or removed.
  	# Please consider switching to the netdev trigger and confirm it
-	# fulfills your needs instead of fixing this driver.
+	# fulfills your needs instead of fixing this driver. See e.g.
+	# Documentation/devicetree/bindings/leds/common.txt
  	depends on BROKEN
  	select LEDS_TRIGGERS
  	---help---


--
Best regards,
Jacek Anaszewski



[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux