From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx> This patch adds basic driver support for the Microchip mcp2517fd CAN-FD controller. The mcp2517fd is capable of transmitting and receiving standard data frames, extended data frames, remote frames and Can-FD frames. The mcp2517fd interfaces with the host over SPI. This patch iprovides basic driver functionality: setting up clocks and the infrastructure for the can and gpio portions of the driver. Datasheet: * http://ww1.microchip.com/downloads/en/DeviceDoc/20005688A.pdf Reference manual: * http://ww1.microchip.com/downloads/en/DeviceDoc/20005678A.pdf Errata: * http://ww1.microchip.com/downloads/en/DeviceDoc/MCP2517FD-Silicon-Errata-and-Data-Sheet-Clarification-DS80000792A.pdf Signed-off-by: Martin Sperl <kernel@xxxxxxxxxxxxxxxx> --- Changelog: V1 -> V2: implemented support as per feedback V2 -> V3: moved dt-binding changes to patch 1 V3 -> V4: resend V4 -> V5: reorganized driver into separate files added more HW detection test V5 -> V6: update copyright year added extra message about spi bus signal quality fixed the use of spi buffer sources/destinations on stack implemented feedback by Wolfgang Gradegger restructured code into separate files --- drivers/net/can/spi/Kconfig | 2 + drivers/net/can/spi/Makefile | 2 + drivers/net/can/spi/mcp25xxfd/Kconfig | 5 + drivers/net/can/spi/mcp25xxfd/Makefile | 12 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.c | 260 +++++++++ drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.h | 14 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.c | 231 ++++++++ drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.h | 19 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_clock.c | 485 ++++++++++++++++ drivers/net/can/spi/mcp25xxfd/mcp25xxfd_clock.h | 28 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_cmd.c | 312 ++++++++++ drivers/net/can/spi/mcp25xxfd/mcp25xxfd_cmd.h | 84 +++ drivers/net/can/spi/mcp25xxfd/mcp25xxfd_crc.c | 31 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_crc.h | 15 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_debugfs.c | 110 ++++ drivers/net/can/spi/mcp25xxfd/mcp25xxfd_debugfs.h | 30 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_ecc.c | 75 +++ drivers/net/can/spi/mcp25xxfd/mcp25xxfd_ecc.h | 16 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.c | 62 ++ drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.h | 15 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_priv.h | 79 +++ drivers/net/can/spi/mcp25xxfd/mcp25xxfd_regs.h | 656 ++++++++++++++++++++++ 22 files changed, 2543 insertions(+) create mode 100644 drivers/net/can/spi/mcp25xxfd/Kconfig create mode 100644 drivers/net/can/spi/mcp25xxfd/Makefile create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_clock.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_clock.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_cmd.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_cmd.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_crc.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_crc.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_debugfs.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_debugfs.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_ecc.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_ecc.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_priv.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_regs.h diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig index 8f2e0dd7b756..7a5b1436492e 100644 --- a/drivers/net/can/spi/Kconfig +++ b/drivers/net/can/spi/Kconfig @@ -13,4 +13,6 @@ config CAN_MCP251X ---help--- Driver for the Microchip MCP251x SPI CAN controllers. +source "drivers/net/can/spi/mcp25xxfd/Kconfig" + endmenu diff --git a/drivers/net/can/spi/Makefile b/drivers/net/can/spi/Makefile index f59fa3731073..67d3ad21730b 100644 --- a/drivers/net/can/spi/Makefile +++ b/drivers/net/can/spi/Makefile @@ -5,3 +5,5 @@ obj-$(CONFIG_CAN_HI311X) += hi311x.o obj-$(CONFIG_CAN_MCP251X) += mcp251x.o + +obj-y += mcp25xxfd/ diff --git a/drivers/net/can/spi/mcp25xxfd/Kconfig b/drivers/net/can/spi/mcp25xxfd/Kconfig new file mode 100644 index 000000000000..f720f1377612 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/Kconfig @@ -0,0 +1,5 @@ +config CAN_MCP25XXFD + tristate "Microchip MCP25xxFD SPI CAN controllers" + depends on HAS_DMA + help + Driver for the Microchip MCP25XXFD SPI FD-CAN controller family. diff --git a/drivers/net/can/spi/mcp25xxfd/Makefile b/drivers/net/can/spi/mcp25xxfd/Makefile new file mode 100644 index 000000000000..1d805ef2c286 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the Linux Controller Area Network SPI drivers. +# +obj-$(CONFIG_CAN_MCP25XXFD) += mcp25xxfd.o +mcp25xxfd-objs := mcp25xxfd_base.o +mcp25xxfd-objs += mcp25xxfd_can.o +mcp25xxfd-objs += mcp25xxfd_clock.o +mcp25xxfd-objs += mcp25xxfd_cmd.o +mcp25xxfd-objs += mcp25xxfd_crc.o +mcp25xxfd-objs += mcp25xxfd_debugfs.o +mcp25xxfd-objs += mcp25xxfd_ecc.o +mcp25xxfd-objs += mcp25xxfd_int.o diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.c new file mode 100644 index 000000000000..362510876fcf --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "mcp25xxfd_can.h" +#include "mcp25xxfd_clock.h" +#include "mcp25xxfd_cmd.h" +#include "mcp25xxfd_debugfs.h" +#include "mcp25xxfd_ecc.h" +#include "mcp25xxfd_int.h" +#include "mcp25xxfd_priv.h" + +/* Device description and rational: + * + * The mcp25xxfd is a CanFD controller that also supports can2.0 only + * modes. + * It is connected via spi to the host and requires at minimum a single + * irq line in addition to the SPI lines - it is not mentioned explicitly + * in the documentation but in principle SPI 3-wire should be possible. + * + * The clock connected is typically 4MHz, 20MHz or 40MHz. + * When using a 4MHz clock the controller can use an integrated PLL to + * get 40MHz. + * + * The controller itself has 2KB of SRAM for CAN-data. + * ECC can get enabled for SRAM. + * CRC-16 checksumming of SPI transfers can get implemented + * - some optimization options may not be efficient in such a situation. + * - more SPI bus bandwidth is used for transfer of CRCs and + * transfer length information + * + * It also contains 2 GPIO pins that can get used either as interrupt lines + * or GPIO IN or Out or STANDBY flags. + * In addition there is a PIN that allows output of a (divided) clock out + * or as a SOF (Start of Can FRAME) interrupt line - e.g for wakeup. + */ + +int mcp25xxfd_base_power_enable(struct regulator *reg, int enable) +{ + if (IS_ERR_OR_NULL(reg)) + return 0; + + if (enable) + return regulator_enable(reg); + else + return regulator_disable(reg); +} + +static const struct of_device_id mcp25xxfd_of_match[] = { + { + .compatible = "microchip,mcp2517fd", + .data = (void *)CAN_MCP2517FD, + }, + { } +}; +MODULE_DEVICE_TABLE(of, mcp25xxfd_of_match); + +static int mcp25xxfd_base_probe(struct spi_device *spi) +{ + const struct of_device_id *of_id = + of_match_device(mcp25xxfd_of_match, &spi->dev); + struct mcp25xxfd_priv *priv; + int ret; + + /* as irq_create_fwspec_mapping() can return 0, check for it */ + if (spi->irq <= 0) { + dev_err(&spi->dev, "no valid irq line defined: irq = %i\n", + spi->irq); + return -EINVAL; + } + + priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* cross assigns */ + spi_set_drvdata(spi, priv); + priv->spi = spi; + + /* assign name */ + snprintf(priv->device_name, sizeof(priv->device_name), + DEVICE_NAME "-%s", dev_name(&priv->spi->dev)); + + /* assign model from of or driver_data */ + if (of_id) + priv->model = (enum mcp25xxfd_model)of_id->data; + else + priv->model = spi_get_device_id(spi)->driver_data; + + mutex_init(&priv->spi_rxtx_lock); + + ret = mcp25xxfd_clock_init(priv); + if (ret) + goto out_free; + + /* Configure the SPI bus */ + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret) + goto out_clk; + + priv->power = devm_regulator_get_optional(&spi->dev, "vdd"); + if (PTR_ERR(priv->power) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto out_clk; + } + + ret = mcp25xxfd_base_power_enable(priv->power, 1); + if (ret) + goto out_clk; + + /* this will also enable the MCP25XXFD_CLK_USER_CAN clock */ + ret = mcp25xxfd_clock_probe(priv); + if (ret) + goto out_probe; + + /* enable the can controller clock */ + ret = mcp25xxfd_clock_start(priv, MCP25XXFD_CLK_USER_CAN); + if (ret) + goto out_probe; + + /* try to identify the can-controller - we need the clock here */ + ret = mcp25xxfd_can_probe(priv); + if (ret) + goto out_ctlclk; + + /* add debugfs */ + mcp25xxfd_debugfs_setup(priv); + + /* disable interrupts */ + ret = mcp25xxfd_int_enable(priv, false); + if (ret) + goto out_debugfs; + + /* setup ECC for SRAM */ + ret = mcp25xxfd_ecc_enable(priv); + if (ret) + goto out_debugfs; + + /* and put controller to sleep by stopping the can clock */ + ret = mcp25xxfd_clock_stop(priv, MCP25XXFD_CLK_USER_CAN); + if (ret) + goto out_debugfs; + + dev_info(&spi->dev, + "MCP%x successfully initialized.\n", priv->model); + return 0; + +out_debugfs: + mcp25xxfd_debugfs_remove(priv); +out_ctlclk: + mcp25xxfd_clock_stop(priv, MCP25XXFD_CLK_USER_CAN); +out_probe: + mcp25xxfd_base_power_enable(priv->power, 0); +out_clk: + mcp25xxfd_clock_release(priv); +out_free: + dev_err(&spi->dev, "Probe failed, err=%d\n", -ret); + return ret; +} + +static int mcp25xxfd_base_remove(struct spi_device *spi) +{ + struct mcp25xxfd_priv *priv = spi_get_drvdata(spi); + + /* clear all running clocks */ + mcp25xxfd_clock_stop(priv, priv->clk_user_mask); + + mcp25xxfd_debugfs_remove(priv); + + mcp25xxfd_base_power_enable(priv->power, 0); + + mcp25xxfd_clock_release(priv); + + return 0; +} + +static int __maybe_unused mcp25xxfd_base_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct mcp25xxfd_priv *priv = spi_get_drvdata(spi); + + mutex_lock(&priv->clk_user_lock); + priv->clk_sleep_mask = priv->clk_user_mask; + mutex_unlock(&priv->clk_user_lock); + + /* disable interrupts */ + mcp25xxfd_int_enable(priv, false); + + /* stop the clocks */ + mcp25xxfd_clock_stop(priv, priv->clk_sleep_mask); + + /* disable power to controller */ + return mcp25xxfd_base_power_enable(priv->power, 0); +} + +static int __maybe_unused mcp25xxfd_base_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct mcp25xxfd_priv *priv = spi_get_drvdata(spi); + int ret = 0; + + /* enable power to controller */ + mcp25xxfd_base_power_enable(priv->power, 1); + + /* if there is no sleep mask, then there is nothing to wake */ + if (!priv->clk_sleep_mask) + return 0; + + /* start the clocks */ + ret = mcp25xxfd_clock_start(priv, priv->clk_sleep_mask); + if (ret) + return 0; + + /* clear the sleep mask */ + mutex_lock(&priv->clk_user_lock); + priv->clk_sleep_mask = 0; + mutex_unlock(&priv->clk_user_lock); + + /* enable the interrupts again */ + return mcp25xxfd_int_enable(priv, true); +} + +static SIMPLE_DEV_PM_OPS(mcp25xxfd_base_pm_ops, mcp25xxfd_base_suspend, + mcp25xxfd_base_resume); + +static const struct spi_device_id mcp25xxfd_id_table[] = { + { + .name = "mcp2517fd", + .driver_data = (kernel_ulong_t)CAN_MCP2517FD, + }, + { } +}; +MODULE_DEVICE_TABLE(spi, mcp25xxfd_id_table); + +static struct spi_driver mcp25xxfd_can_driver = { + .driver = { + .name = DEVICE_NAME, + .of_match_table = mcp25xxfd_of_match, + .pm = &mcp25xxfd_base_pm_ops, + }, + .id_table = mcp25xxfd_id_table, + .probe = mcp25xxfd_base_probe, + .remove = mcp25xxfd_base_remove, +}; +module_spi_driver(mcp25xxfd_can_driver); + +MODULE_AUTHOR("Martin Sperl <kernel@xxxxxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("Microchip 25XXFD CAN driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.h new file mode 100644 index 000000000000..4559ac60645c --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ +#ifndef __MCP25XXFD_BASE_H +#define __MCP25XXFD_BASE_H + +#include <linux/regulator/consumer.h> + +int mcp25xxfd_base_power_enable(struct regulator *reg, int enable); + +#endif /* __MCP25XXFD_BASE_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.c new file mode 100644 index 000000000000..f98b02ff057b --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.c @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +/* controller details + * + * It has 32 FIFOs (of up to 32 CAN-frames). + * + * There are 4 Fifo types which can get configured: + * * TEF - Transmission Event Fifo - which consumes FIFO 0 + * even if it is not configured + * * Tansmission Queue - for up to 32 Frames. + * this queue reorders CAN frames to get transmitted following the + * typical CAN dominant/recessive rules on the can bus itself. + * This FIFO is optional. + * * TX FIFO: generic TX fifos that can contain arbitrary data + * and which come with a configurable priority for transmission + * It is also possible to have the Controller automatically trigger + * a transfer when a Filter Rule for a RTR frame matches. + * Each of these fifos in principle can get configured for distinct + * dlc sizes (8 thru 64 bytes) + * * RX FIFO: generic RX fifo which is filled via filter-rules. + * Each of these fifos in principle can get configured for distinct + * dlc sizes (8 thru 64 bytes) + * Unfortunately there is no filter rule that would allow triggering + * on different frame sizes, so for all practical purposes the + * RX fifos have to be of the same size (unless one wants to experience + * lost data). + * When a Can Frame is transmitted from the TX Queue or an individual + * TX FIFO then a small TEF Frame can get added to the TEF FIFO queue + * to log the Transmission of the frame - this includes ID, Flags + * (including a custom identifier/index) and the timestamp (see below). + * + * The controller provides an optional free running counter with a divider + * for timestamping of RX frames as well as for TEF entries. + */ + +/* Implementation notes: + * + * Right now we only use the CAN controller block to put us into deep sleep + * this means that the oscillator clock is turned off. + * So this is the only thing that we implement here right now + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/spi/spi.h> + +#include "mcp25xxfd_clock.h" +#include "mcp25xxfd_cmd.h" +#include "mcp25xxfd_priv.h" +#include "mcp25xxfd_regs.h" + +static int mcp25xxfd_can_get_mode(struct mcp25xxfd_priv *priv, u32 *reg) +{ + int ret; + + ret = mcp25xxfd_cmd_read(priv->spi, MCP25XXFD_CAN_CON, reg); + if (ret) + return ret; + + return (*reg & MCP25XXFD_CAN_CON_OPMOD_MASK) >> + MCP25XXFD_CAN_CON_OPMOD_SHIFT; +} + +static int mcp25xxfd_can_switch_mode(struct mcp25xxfd_priv *priv, + u32 *reg, int mode) +{ + u32 dummy; + int ret, i; + + /* get the current mode/register - if reg is NULL + * when the can controller is not setup yet + * typically by calling mcp25xxfd_can_sleep_mode + * (this only happens during initialization phase) + */ + if (reg) { + ret = mcp25xxfd_can_get_mode(priv, reg); + if (ret < 0) + return ret; + } else { + /* alternatively use dummy */ + dummy = 0; + reg = &dummy; + } + + /* compute the effective mode in osc*/ + *reg &= ~(MCP25XXFD_CAN_CON_REQOP_MASK | + MCP25XXFD_CAN_CON_OPMOD_MASK); + *reg |= (mode << MCP25XXFD_CAN_CON_REQOP_SHIFT) | + (mode << MCP25XXFD_CAN_CON_OPMOD_SHIFT); + + /* if the opmode is sleep then the oscilator will be disabled + * and also not ready, so fake this change + */ + if (mode == MCP25XXFD_CAN_CON_MODE_SLEEP) + mcp25xxfd_clock_fake_sleep(priv); + + /* request the mode switch */ + ret = mcp25xxfd_cmd_write(priv->spi, MCP25XXFD_CAN_CON, *reg); + if (ret) + return ret; + + /* if we are in now sleep mode then return immediately + * the controller does not respond back! + */ + if (mode == MCP25XXFD_CAN_CON_MODE_SLEEP) + return 0; + + /* wait for it to stabilize/switch mode + * we assume 256 rounds should be enough as this is > 12ms + * at 1MHz Can Bus speed without any extra overhead + * + * The assumption here is that it depends on bus activity + * how long it takes the controller to switch modes + */ + for (i = 0; i < 256; i++) { + /* get the mode */ + ret = mcp25xxfd_can_get_mode(priv, reg); + if (ret < 0) + return ret; + /* check that we have reached our mode */ + if (ret == mode) + return 0; + } + + dev_err(&priv->spi->dev, "Failed to switch to mode %u in time\n", + mode); + return -ETIMEDOUT; +} + +static int mcp25xxfd_can_probe_modeswitch(struct mcp25xxfd_priv *priv) +{ + u32 mode_data; + int ret; + + /* so we should be in config mode now, so move to INT_LOOPBACK */ + ret = mcp25xxfd_can_switch_mode(priv, &mode_data, + MCP25XXFD_CAN_CON_MODE_INT_LOOPBACK); + if (ret) { + dev_err(&priv->spi->dev, + "Failed to switch into loopback mode\n"); + return ret; + } + + /* and back into config mode */ + ret = mcp25xxfd_can_switch_mode(priv, &mode_data, + MCP25XXFD_CAN_CON_MODE_CONFIG); + if (ret) { + dev_err(&priv->spi->dev, + "Failed to switch back to config mode\n"); + return ret; + } + + /* so we have checked basic functionality successfully */ + return 0; +} + +int mcp25xxfd_can_sleep_mode(struct mcp25xxfd_priv *priv) +{ + return mcp25xxfd_can_switch_mode(priv, NULL, + MCP25XXFD_CAN_CON_MODE_SLEEP); +} + +int mcp25xxfd_can_probe(struct mcp25xxfd_priv *priv) +{ + struct spi_device *spi = priv->spi; + u32 mode_data; + int mode, ret; + + /* read TXQCON - the TXEN bit should always read as 1 */ + ret = mcp25xxfd_cmd_read(spi, MCP25XXFD_CAN_TXQCON, &mode_data); + if (ret) + return ret; + if ((mode_data & MCP25XXFD_CAN_TXQCON_TXEN) == 0) { + dev_err(&spi->dev, + "Register TXQCON does not have bit TXEN set - reads as %08x - this may be a problem with spi bus signal quality - try reducing spi-clock speed if this can get reproduced", + mode_data); + return -EINVAL; + } + + /* try to get the current mode */ + mode = mcp25xxfd_can_get_mode(priv, &mode_data); + if (mode < 0) + return mode; + + /* we would expect to be in config mode, as a SPI-reset should + * have moved us into config mode. + * But then the documentation says that SPI-reset may only work + * reliably when already in config mode + */ + + /* so if we are in config mode then everything is fine + * and we check that a mode switch works propperly + */ + if (mode == MCP25XXFD_CAN_CON_MODE_CONFIG) + return mcp25xxfd_can_probe_modeswitch(priv); + + /* if the bitfield is 0 then there is something is wrong */ + if (!mode_data) { + dev_err(&spi->dev, + "got controller config register reading as 0\n"); + return -EINVAL; + } + + /* any other mode is unexpected */ + dev_err(&spi->dev, + "Found controller in unexpected mode %i - register reads as %08x\n", + mode, mode_data); + + /* so try to move to config mode + * if this fails, then everything is lost and the controller + * is not identified + * This action MAY be destructive if a different device is connected + * but note that the first hurdle (oscillator) was already + * successful - so we should be safe... + */ + ret = mcp25xxfd_can_switch_mode(priv, &mode_data, + MCP25XXFD_CAN_CON_MODE_CONFIG); + if (ret) { + dev_err(&priv->spi->dev, + "Mode did not switch to config as expected - could not identify controller - register reads as %08x\n", + mode_data); + return -EINVAL; + } + /* check that modeswitch is really working */ + return mcp25xxfd_can_probe_modeswitch(priv); +} diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.h new file mode 100644 index 000000000000..7a657f7946f7 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#ifndef __MCP25XXFD_CAN_H +#define __MCP25XXFD_CAN_H + +#include "mcp25xxfd_priv.h" + +/* to put us to sleep fully we need the CAN controller to enter sleep mode */ +int mcp25xxfd_can_sleep_mode(struct mcp25xxfd_priv *priv); + +/* probe the can controller */ +int mcp25xxfd_can_probe(struct mcp25xxfd_priv *priv); + +#endif /* __MCP25XXFD_CAN_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_clock.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_clock.c new file mode 100644 index 000000000000..aee482e7c02a --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_clock.c @@ -0,0 +1,485 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +/* Known hardware issues and workarounds in this driver: + * + * * There is one situation where the controller will require a full POR + * (total power off) to recover from a bad Clock configuration. + * This happens when the wrong clock is configured in the device tree + * (say 4MHz are configured, while 40MHz is the actual clock frequency + * of the HW). + * In such a situation the driver tries to enable the PLL, which will + * never synchronize and the controller becomes unresponsive to further + * spi requests until a full POR. + * + * Mitigation: + * none as of now + * + * Possible implementation of a mitigation/sanity check: + * during initialization: + * * try to identify the HW at 1MHz: + * on success: + * * controller is identified + * on failure: + * * controller is absent - fail + * * force controller clock to run with disabled PLL + * * try to identify the HW at 2MHz: + * on success: + * * controller clock is >= 4 MHz + * * this may be 4MHz + * on failure: + * * controller clock is < 4 MHz + * * try to identify the HW at 2.5MHz: + * on success: + * * controller clock is >= 5 MHz + * * this may not be 4MHz + * on failure: + * * controller clock is 4 MHz + * * enable PLL + * * exit successfully (or run last test for verification purposes) + * * try to identify the HW at <dt-clock/2> MHz: + * on success: + * * controller clock is >= <dt-clock/2> MHz + * (it could be higher though) + * on failure: + * * the controller is not running at the + * clock rate configured in the DT + * * if PLL is enabled warn about requirements of POR + * * fail + * + * Side-effects: + * * longer initialization time + * + * Possible issues with mitigation: + * * possibly miss-identification because the SPI block may work + * "somewhat" at frequencies > < clock / 2 + delta f> + * this may be especially true for the situation where we test if + * 2.5MHz SPI-Clock works. + * * also SPI HW-clock dividers may do a round down to fixed frequencies + * which is not properly reported and may result in false positives + * because a frequency lower than expected is used. + * + * This is the reason why only simple testing is enabled at the risk of + * the need for a POR. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/spi/spi.h> + +#include "mcp25xxfd_can.h" +#include "mcp25xxfd_cmd.h" +#include "mcp25xxfd_priv.h" + +/* the PLL may take some time to synchronize - use 1 second as timeout */ +#define MCP25XXFD_OSC_POLLING_JIFFIES (HZ) + +static u32 _mcp25xxfd_clkout_mask(struct mcp25xxfd_priv *priv) +{ + u32 val = 0; + + if (priv->config.clock_div2) + val |= MCP25XXFD_OSC_SCLKDIV; + + switch (priv->config.clock_odiv) { + case 0: + break; + case 1: + val |= MCP25XXFD_OSC_CLKODIV_1 << MCP25XXFD_OSC_CLKODIV_SHIFT; + break; + case 2: + val |= MCP25XXFD_OSC_CLKODIV_2 << MCP25XXFD_OSC_CLKODIV_SHIFT; + break; + case 4: + val |= MCP25XXFD_OSC_CLKODIV_4 << MCP25XXFD_OSC_CLKODIV_SHIFT; + break; + case 10: + val |= MCP25XXFD_OSC_CLKODIV_10 << MCP25XXFD_OSC_CLKODIV_SHIFT; + break; + default: + /* this should never happen but is error-handled + * by the dt-parsing + */ + break; + } + + return val; +} + +static int _mcp25xxfd_waitfor_osc(struct mcp25xxfd_priv *priv, + u32 waitfor, u32 mask) +{ + unsigned long timeout; + int ret; + + /* wait for synced pll/osc/sclk */ + timeout = jiffies + MCP25XXFD_OSC_POLLING_JIFFIES; + while (time_before_eq(jiffies, timeout)) { + ret = mcp25xxfd_cmd_read(priv->spi, MCP25XXFD_OSC, + &priv->regs.osc); + if (ret) + return ret; + /* check for expected bits to be set/unset */ + if ((priv->regs.osc & mask) == waitfor) + return 0; + } + + return -ETIMEDOUT; +} + +static int _mcp25xxfd_clock_configure_osc(struct mcp25xxfd_priv *priv, + u32 value, u32 waitfor, u32 mask) +{ + int ret; + + /* write the osc value to the controller - waking it if necessary */ + ret = mcp25xxfd_cmd_write(priv->spi, MCP25XXFD_OSC, value); + if (ret) + return ret; + + /* wait for the clock to stabelize */ + ret = _mcp25xxfd_waitfor_osc(priv, waitfor, mask); + + /* on timeout try again setting the register */ + if (ret == -ETIMEDOUT) { + /* write the clock to the controller */ + ret = mcp25xxfd_cmd_write(priv->spi, MCP25XXFD_OSC, value); + if (ret) + return ret; + + /* wait for the clock to stabelize */ + ret = _mcp25xxfd_waitfor_osc(priv, waitfor, mask); + } + + /* handle timeout special - report the fact */ + if (ret == -ETIMEDOUT) + dev_err(&priv->spi->dev, + "Clock did not switch within the timeout period\n"); + + return ret; +} + +static int _mcp25xxfd_clock_start(struct mcp25xxfd_priv *priv) +{ + u32 value = _mcp25xxfd_clkout_mask(priv); + u32 waitfor = MCP25XXFD_OSC_OSCRDY; + u32 mask = waitfor | MCP25XXFD_OSC_OSCDIS | MCP25XXFD_OSC_PLLRDY | + MCP25XXFD_OSC_PLLEN; + + /* enable PLL as well - set expectations */ + if (priv->config.clock_pll) { + value |= MCP25XXFD_OSC_PLLEN; + waitfor |= MCP25XXFD_OSC_PLLRDY | MCP25XXFD_OSC_PLLEN; + } + + /* set the oscilator now */ + return _mcp25xxfd_clock_configure_osc(priv, value, waitfor, mask); +} + +static int _mcp25xxfd_clock_stop(struct mcp25xxfd_priv *priv) +{ + u32 value = _mcp25xxfd_clkout_mask(priv); + u32 waitfor = 0; + u32 mask = MCP25XXFD_OSC_OSCDIS | MCP25XXFD_OSC_PLLRDY | + MCP25XXFD_OSC_PLLEN; + int ret; + + ret = _mcp25xxfd_clock_configure_osc(priv, value, waitfor, mask); + if (ret) + return ret; + + /* finally switch the controller mode to sleep + * by this time the controller should be in config mode already + * this way we wake to config mode again + */ + return mcp25xxfd_can_sleep_mode(priv); +} + +int mcp25xxfd_clock_start(struct mcp25xxfd_priv *priv, int requestor_mask) +{ + int ret = 0; + + /* without a clock there is nothing we can do... */ + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + mutex_lock(&priv->clk_user_lock); + + /* if clock is already started, then skip */ + if (priv->clk_user_mask & requestor_mask) + goto out; + + /* enable the clock on the host side*/ + ret = clk_prepare_enable(priv->clk); + if (ret) + goto out; + + /* enable the clock on the controller side */ + ret = _mcp25xxfd_clock_start(priv); + if (ret) + goto out; + + /* mark the clock for the specific component as started */ + priv->clk_user_mask |= requestor_mask; + + /* and now we use the normal spi speed */ + priv->spi_use_speed_hz = priv->spi_normal_speed_hz; + +out: + mutex_unlock(&priv->clk_user_lock); + + return ret; +} + +int mcp25xxfd_clock_stop(struct mcp25xxfd_priv *priv, int requestor_mask) +{ + int ret; + + /* without a clock there is nothing we can do... */ + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + mutex_lock(&priv->clk_user_lock); + + /* if the mask is empty then skip, as the clock is stopped */ + if (!priv->clk_user_mask) + goto out; + + /* clear the clock mask */ + priv->clk_user_mask &= ~requestor_mask; + + /* if the mask is not empty then skip, as the clock is needed */ + if (priv->clk_user_mask) + goto out; + + /* and now we use the setup spi speed */ + priv->spi_use_speed_hz = priv->spi_setup_speed_hz; + + /* stop the clock on the controller */ + ret = _mcp25xxfd_clock_stop(priv); + + /* and we stop the clock on the host*/ + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); +out: + mutex_unlock(&priv->clk_user_lock); + + return 0; +} + +static int _mcp25xxfd_clock_probe(struct mcp25xxfd_priv *priv) +{ + int ret; + + /* Wait for oscillator startup timer after power up */ + mdelay(MCP25XXFD_OST_DELAY_MS); + + /* send a "blind" reset, hoping we are in Config mode */ + mcp25xxfd_cmd_reset(priv->spi); + + /* Wait for oscillator startup again */ + mdelay(MCP25XXFD_OST_DELAY_MS); + + /* check clock register that the clock is ready or disabled */ + ret = mcp25xxfd_cmd_read(priv->spi, MCP25XXFD_OSC, + &priv->regs.osc); + if (ret) + return ret; + + /* there can only be one... */ + switch (priv->regs.osc & + (MCP25XXFD_OSC_OSCRDY | MCP25XXFD_OSC_OSCDIS)) { + case MCP25XXFD_OSC_OSCRDY: /* either the clock is ready */ + break; + case MCP25XXFD_OSC_OSCDIS: /* or the clock is disabled */ + break; + default: + /* otherwise there is no valid device (or in strange state) + * + * if PLL is enabled but not ready, then there may be + * something "fishy" + * this happened during driver development + * (enabling pll, when when on wrong clock), so best warn + * about such a possibility + */ + if ((priv->regs.osc & + (MCP25XXFD_OSC_PLLEN | MCP25XXFD_OSC_PLLRDY)) + == MCP25XXFD_OSC_PLLEN) + dev_err(&priv->spi->dev, + "mcp25xxfd may be in a strange state - a power disconnect may be required\n"); + + return -ENODEV; + } + + return 0; +} + +int mcp25xxfd_clock_probe(struct mcp25xxfd_priv *priv) +{ + int ret; + + /* this will also enable the MCP25XXFD_CLK_USER_CAN clock */ + ret = _mcp25xxfd_clock_probe(priv); + + /* on error retry a second time */ + if (ret == -ENODEV) { + ret = _mcp25xxfd_clock_probe(priv); + if (!ret) + dev_info(&priv->spi->dev, + "found device only during retry\n"); + } + if (ret) { + if (ret == -ENODEV) + dev_err(&priv->spi->dev, + "Cannot initialize MCP%x. Wrong wiring? (oscilator register reads as %08x)\n", + priv->model, priv->regs.osc); + } + + return ret; +} + +void mcp25xxfd_clock_release(struct mcp25xxfd_priv *priv) +{ + if (!IS_ERR_OR_NULL(priv->clk)) + clk_disable_unprepare(priv->clk); +} + +#ifdef CONFIG_OF_DYNAMIC +static int mcp25xxfd_clock_of_parse(struct mcp25xxfd_priv *priv) +{ + struct spi_device *spi = priv->spi; + const struct device_node *np = spi->dev.of_node; + u32 val; + int ret; + + priv->config.clock_div2 = false; + priv->config.clock_div2 = + of_property_read_bool(np, "microchip,clock-div2"); + + priv->config.clock_odiv = 10; + ret = of_property_read_u32_index(np, "microchip,clock-out-div", + 0, &val); + if (!ret) { + switch (val) { + case 0: + case 1: + case 2: + case 4: + case 10: + priv->config.clock_odiv = val; + break; + default: + dev_err(&spi->dev, + "Invalid value in device tree for microchip,clock_out_div: %u - valid values: 0, 1, 2, 4, 10\n", + val); + return -EINVAL; + } + } + + return 0; +} +#else +static int mcp25xxfd_clock_of_parse(struct mcp25xxfd_priv *priv) +{ + return 0; +} +#endif + +int mcp25xxfd_clock_init(struct mcp25xxfd_priv *priv) +{ + struct spi_device *spi = priv->spi; + struct clk *clk; + int ret, freq; + + mutex_init(&priv->clk_user_lock); + + priv->config.clock_div2 = false; + priv->config.clock_odiv = 10; + + ret = mcp25xxfd_clock_of_parse(priv); + if (ret) + return ret; + + /* get clock */ + clk = devm_clk_get(&spi->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + freq = clk_get_rate(clk); + if (freq < MCP25XXFD_MIN_CLOCK_FREQUENCY || + freq > MCP25XXFD_MAX_CLOCK_FREQUENCY) { + dev_err(&spi->dev, + "Clock frequency %i is not in range [%i:%i]\n", + freq, + MCP25XXFD_MIN_CLOCK_FREQUENCY, + MCP25XXFD_MAX_CLOCK_FREQUENCY); + return -ERANGE; + } + + /* enable the clock and mark as enabled */ + ret = clk_prepare_enable(clk); + if (ret) + return ret; + priv->clk = clk; + + /* if we have a clock that is <= 4MHz, enable the pll */ + priv->config.clock_pll = + (freq <= MCP25XXFD_AUTO_PLL_MAX_CLOCK_FREQUENCY); + + /* decide on the effective clock rate */ + priv->clock_freq = freq; + if (priv->config.clock_pll) + priv->clock_freq *= MCP25XXFD_PLL_MULTIPLIER; + if (priv->config.clock_div2) + priv->clock_freq /= MCP25XXFD_SCLK_DIVIDER; + + /* calculate the clock frequencies to use + * + * setup clock speed is at most 1/4 the input clock speed + * the reason for the factor of 4 is that there is + * a clock divider in the controller that MAY be enabled in some + * circumstances so we may find a controller with that enabled + * during probe phase + */ + priv->spi_setup_speed_hz = freq / 4; + + /* normal operation clock speeds */ + priv->spi_normal_speed_hz = priv->clock_freq / 2; + if (priv->config.clock_div2) { + priv->spi_setup_speed_hz /= MCP25XXFD_SCLK_DIVIDER; + priv->spi_normal_speed_hz /= MCP25XXFD_SCLK_DIVIDER; + } + + /* set limit on speed */ + if (spi->max_speed_hz) { + priv->spi_setup_speed_hz = min_t(int, + priv->spi_setup_speed_hz, + spi->max_speed_hz); + priv->spi_normal_speed_hz = min_t(int, + priv->spi_normal_speed_hz, + spi->max_speed_hz); + } + + /* use setup speed by default + * - this is switched when clock is enabled/disabled + */ + priv->spi_use_speed_hz = priv->spi_setup_speed_hz; + + return 0; +} + +void mcp25xxfd_clock_fake_sleep(struct mcp25xxfd_priv *priv) +{ + priv->regs.osc &= ~(MCP25XXFD_OSC_OSCRDY | + MCP25XXFD_OSC_PLLRDY | + MCP25XXFD_OSC_SCLKRDY); + priv->regs.osc |= MCP25XXFD_OSC_OSCDIS; +} diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_clock.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_clock.h new file mode 100644 index 000000000000..049e95cfa9ad --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_clock.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#ifndef __MCP25XXFD_CLOCK_H +#define __MCP25XXFD_CLOCK_H + +#include "mcp25xxfd_priv.h" + +#define MCP25XXFD_CLK_USER_CAN BIT(0) +#define MCP25XXFD_CLK_USER_GPIO0 BIT(1) +#define MCP25XXFD_CLK_USER_GPIO1 BIT(2) +#define MCP25XXFD_CLK_USER_CLKOUT BIT(3) + +/* shared (internal) clock control */ +int mcp25xxfd_clock_init(struct mcp25xxfd_priv *priv); +int mcp25xxfd_clock_probe(struct mcp25xxfd_priv *priv); +void mcp25xxfd_clock_release(struct mcp25xxfd_priv *priv); + +int mcp25xxfd_clock_stop(struct mcp25xxfd_priv *priv, int requestor_mask); +int mcp25xxfd_clock_start(struct mcp25xxfd_priv *priv, int requestor_mask); + +void mcp25xxfd_clock_fake_sleep(struct mcp25xxfd_priv *priv); + +#endif /* __MCP25XXFD_CLOCK_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_cmd.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_cmd.c new file mode 100644 index 000000000000..0332189b4f07 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_cmd.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> + +#include "mcp25xxfd_cmd.h" +#include "mcp25xxfd_priv.h" + +/* SPI helper */ + +/* wrapper arround spi_sync, that sets speed_hz */ +static int mcp25xxfd_cmd_sync_transfer(struct spi_device *spi, + struct spi_transfer *xfer, + unsigned int xfers) +{ + struct mcp25xxfd_priv *priv = spi_get_drvdata(spi); + int i; + + for (i = 0; i < xfers; i++) + xfer[i].speed_hz = priv->spi_use_speed_hz; + + return spi_sync_transfer(spi, xfer, xfers); +} + +/* simple spi_write wrapper with speed_hz + * WARINING: tx_buf needs to be on heap! + */ +static int mcp25xxfd_cmd_sync_write(struct spi_device *spi, + const void *tx_buf, + unsigned int tx_len) +{ + struct spi_transfer xfer; + + memset(&xfer, 0, sizeof(xfer)); + xfer.tx_buf = tx_buf; + xfer.len = tx_len; + + return mcp25xxfd_cmd_sync_transfer(spi, &xfer, 1); +} + +/* alloc buffer */ +static int mcp25xxfd_cmd_alloc_buf(struct spi_device *spi, + size_t len, + u8 **tx, u8 **rx) +{ + struct mcp25xxfd_priv *priv = spi_get_drvdata(spi); + + /* allocate from heap in case the size is to big + * or the preallocated buffer is already used (i.e locked) + */ + if (len > sizeof(priv->spi_tx) || + !mutex_trylock(&priv->spi_rxtx_lock)) { + /* allocate tx+rx in one allocation if rx is requested */ + *tx = kzalloc(rx ? 2 * len : len, GFP_KERNEL); + if (!*tx) + return -ENOMEM; + if (rx) + *rx = *tx + len; + } else { + /* use the preallocated buffers instead */ + *tx = priv->spi_tx; + memset(priv->spi_tx, 0, sizeof(priv->spi_tx)); + if (rx) { + *rx = priv->spi_rx; + memset(priv->spi_rx, 0, sizeof(priv->spi_rx)); + } + } + + return 0; +} + +static void mcp25xxfd_cmd_release_buf(struct spi_device *spi, u8 *tx, u8 *rx) +{ + struct mcp25xxfd_priv *priv = spi_get_drvdata(spi); + + if (tx == priv->spi_tx) + mutex_unlock(&priv->spi_rxtx_lock); + else + kfree(tx); +} + +/* an optimization of spi_write_then_read that merges the transfers + * this also makes sure that the data is ALWAYS on heap + */ +static int mcp25xxfd_cmd_write_then_read(struct spi_device *spi, + const void *tx_buf, + unsigned int tx_len, + void *rx_buf, + unsigned int rx_len) +{ + struct spi_transfer xfer[2]; + u8 *spi_tx, *spi_rx; + int xfers; + int ret; + + /* get pointer to buffers */ + ret = mcp25xxfd_cmd_alloc_buf(spi, tx_len + rx_len, &spi_tx, &spi_rx); + if (ret) + return ret; + + /* clear the xfers */ + memset(xfer, 0, sizeof(xfer)); + + /* special handling for half-duplex */ + if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) { + xfers = 2; + xfer[0].tx_buf = spi_tx; + xfer[0].len = tx_len; + /* the offset for rx_buf needs to get aligned */ + xfer[1].rx_buf = spi_rx + tx_len; + xfer[1].len = rx_len; + } else { + xfers = 1; + xfer[0].len = tx_len + rx_len; + xfer[0].tx_buf = spi_tx; + xfer[0].rx_buf = spi_rx; + } + + /* copy data - especially to avoid buffers from stack */ + memcpy(spi_tx, tx_buf, tx_len); + + /* do the transfer */ + ret = mcp25xxfd_cmd_sync_transfer(spi, xfer, xfers); + if (ret) + goto out; + + /* copy result back */ + memcpy(rx_buf, xfer[0].rx_buf + tx_len, rx_len); + +out: + mcp25xxfd_cmd_release_buf(spi, spi_tx, spi_rx); + + return ret; +} + +static int mcp25xxfd_cmd_write_then_write(struct spi_device *spi, + const void *tx_buf, + unsigned int tx_len, + const void *tx2_buf, + unsigned int tx2_len) +{ + struct spi_transfer xfer; + u8 *spi_tx; + int ret; + + /* get pointer to buffers */ + ret = mcp25xxfd_cmd_alloc_buf(spi, tx_len + tx2_len, &spi_tx, NULL); + if (ret) + return ret; + + /* setup xfer */ + memset(&xfer, 0, sizeof(xfer)); + xfer.len = tx_len + tx2_len; + xfer.tx_buf = spi_tx; + + /* copy data to correct location in buffer */ + memcpy(spi_tx, tx_buf, tx_len); + memcpy(spi_tx + tx_len, tx2_buf, tx2_len); + + /* run the transfer */ + ret = mcp25xxfd_cmd_sync_transfer(spi, &xfer, 1); + + mcp25xxfd_cmd_release_buf(spi, spi_tx, NULL); + + return ret; +} + +/* mcp25xxfd spi command/protocol helper */ + +/* read multiple bytes, transform some registers */ +int mcp25xxfd_cmd_readn(struct spi_device *spi, u32 reg, + void *data, int n) +{ + u8 cmd[2]; + int ret; + + mcp25xxfd_cmd_calc(MCP25XXFD_INSTRUCTION_READ, reg, cmd); + + ret = mcp25xxfd_cmd_write_then_read(spi, &cmd, 2, data, n); + if (ret) + return ret; + + return 0; +} + +/* read a register, but we are only interrested in a few bytes */ +int mcp25xxfd_cmd_read_mask(struct spi_device *spi, u32 reg, + u32 *data, u32 mask) +{ + int first_byte, last_byte, len_byte; + int ret; + + /* check that at least one bit is set */ + if (!mask) + return -EINVAL; + + /* calculate first and last byte used */ + first_byte = mcp25xxfd_cmd_first_byte(mask); + last_byte = mcp25xxfd_cmd_last_byte(mask); + len_byte = last_byte - first_byte + 1; + + /* do a partial read */ + *data = 0; + ret = mcp25xxfd_cmd_readn(spi, reg + first_byte, + ((void *)data + first_byte), len_byte); + if (ret) + return ret; + + mcp25xxfd_cmd_convert_to_cpu(data, 1); + + return 0; +} + +int mcp25xxfd_cmd_writen(struct spi_device *spi, u32 reg, + void *data, int n) +{ + u8 cmd[2]; + int ret; + + mcp25xxfd_cmd_calc(MCP25XXFD_INSTRUCTION_WRITE, reg, cmd); + + ret = mcp25xxfd_cmd_write_then_write(spi, &cmd, 2, data, n); + if (ret) + return ret; + + return 0; +} + +/* read a register, but we are only interrested in a few bytes */ +int mcp25xxfd_cmd_write_mask(struct spi_device *spi, u32 reg, + u32 data, u32 mask) +{ + int first_byte, last_byte, len_byte; + u8 cmd[2]; + + /* check that at least one bit is set */ + if (!mask) + return -EINVAL; + + /* calculate first and last byte used */ + first_byte = mcp25xxfd_cmd_first_byte(mask); + last_byte = mcp25xxfd_cmd_last_byte(mask); + len_byte = last_byte - first_byte + 1; + + /* prepare buffer */ + mcp25xxfd_cmd_calc(MCP25XXFD_INSTRUCTION_WRITE, + reg + first_byte, cmd); + + mcp25xxfd_cmd_convert_from_cpu(&data, 1); + + return mcp25xxfd_cmd_write_then_write(spi, + cmd, sizeof(cmd), + ((void *)&data + first_byte), + len_byte); +} + +int mcp25xxfd_cmd_write_regs(struct spi_device *spi, u32 reg, + u32 *data, u32 bytes) +{ + int ret; + + /* first transpose to controller format */ + mcp25xxfd_cmd_convert_from_cpu(data, bytes / sizeof(bytes)); + + /* now write it */ + ret = mcp25xxfd_cmd_writen(spi, reg, data, bytes); + + /* and convert it back to cpu format even if it fails */ + mcp25xxfd_cmd_convert_to_cpu(data, bytes / sizeof(bytes)); + + return ret; +} + +int mcp25xxfd_cmd_read_regs(struct spi_device *spi, u32 reg, + u32 *data, u32 bytes) +{ + int ret; + + /* read it */ + ret = mcp25xxfd_cmd_readn(spi, reg, data, bytes); + + /* and convert it to cpu format */ + mcp25xxfd_cmd_convert_to_cpu((u32 *)data, bytes / sizeof(bytes)); + + return ret; +} + +int mcp25xxfd_cmd_reset(struct spi_device *spi) +{ + u8 *cmd; + int ret; + + /* allocate 2 bytes on heap, as we use sync_write */ + cmd = kzalloc(2, GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + mcp25xxfd_cmd_calc(MCP25XXFD_INSTRUCTION_RESET, 0, cmd); + + /* write the reset command */ + ret = mcp25xxfd_cmd_sync_write(spi, cmd, 2); + + kfree(cmd); + + return ret; +} diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_cmd.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_cmd.h new file mode 100644 index 000000000000..c9b8ae4db151 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_cmd.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#ifndef __MCP25XXFD_CMD_H +#define __MCP25XXFD_CMD_H + +#include <linux/byteorder/generic.h> +#include <linux/spi/spi.h> + +/* SPI commands */ +#define MCP25XXFD_INSTRUCTION_RESET 0x0000 +#define MCP25XXFD_INSTRUCTION_READ 0x3000 +#define MCP25XXFD_INSTRUCTION_WRITE 0x2000 +#define MCP25XXFD_INSTRUCTION_READ_CRC 0xB000 +#define MCP25XXFD_INSTRUCTION_WRITE_CRC 0xA000 +#define MCP25XXFD_INSTRUCTION_WRITE_SAVE 0xC000 + +#define MCP25XXFD_ADDRESS_MASK 0x0fff + +static inline void mcp25xxfd_cmd_convert_to_cpu(u32 *data, int n) +{ + le32_to_cpu_array(data, n); +} + +static inline void mcp25xxfd_cmd_convert_from_cpu(u32 *data, int n) +{ + cpu_to_le32_array(data, n); +} + +static inline void mcp25xxfd_cmd_calc(u16 cmd, u16 addr, u8 *data) +{ + cmd = cmd | (addr & MCP25XXFD_ADDRESS_MASK); + + data[0] = (cmd >> 8) & 0xff; + data[1] = (cmd >> 0) & 0xff; +} + +static inline int mcp25xxfd_cmd_first_byte(u32 mask) +{ + return (mask & 0x0000ffff) ? + ((mask & 0x000000ff) ? 0 : 1) : + ((mask & 0x00ff0000) ? 2 : 3); +} + +static inline int mcp25xxfd_cmd_last_byte(u32 mask) +{ + return (mask & 0xffff0000) ? + ((mask & 0xff000000) ? 3 : 2) : + ((mask & 0x0000ff00) ? 1 : 0); +} + +int mcp25xxfd_cmd_readn(struct spi_device *spi, u32 reg, + void *data, int n); +int mcp25xxfd_cmd_read_mask(struct spi_device *spi, u32 reg, + u32 *data, u32 mask); +static inline int mcp25xxfd_cmd_read(struct spi_device *spi, u32 reg, + u32 *data) +{ + return mcp25xxfd_cmd_read_mask(spi, reg, data, -1); +} + +int mcp25xxfd_cmd_read_regs(struct spi_device *spi, u32 reg, + u32 *data, u32 bytes); + +int mcp25xxfd_cmd_writen(struct spi_device *spi, u32 reg, + void *data, int n); +int mcp25xxfd_cmd_write_mask(struct spi_device *spi, u32 reg, + u32 data, u32 mask); +static inline int mcp25xxfd_cmd_write(struct spi_device *spi, u32 reg, + u32 data) +{ + return mcp25xxfd_cmd_write_mask(spi, reg, data, -1); +} + +int mcp25xxfd_cmd_write_regs(struct spi_device *spi, u32 reg, + u32 *data, u32 bytes); + +int mcp25xxfd_cmd_reset(struct spi_device *spi); + +#endif /* __MCP25XXFD_CMD_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_crc.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_crc.c new file mode 100644 index 000000000000..b893d8009448 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_crc.c @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#include <linux/kernel.h> +#include <linux/spi/spi.h> +#include "mcp25xxfd_cmd.h" +#include "mcp25xxfd_crc.h" +#include "mcp25xxfd_regs.h" +#include "mcp25xxfd_priv.h" + +int mcp25xxfd_crc_enable_int(struct mcp25xxfd_priv *priv, bool enable) +{ + u32 mask = MCP25XXFD_CRC_CRCERRIE | MCP25XXFD_CRC_FERRIE; + + priv->regs.crc &= ~mask; + priv->regs.crc |= enable ? mask : 0; + + return mcp25xxfd_cmd_write_mask(priv->spi, MCP25XXFD_CRC, + priv->regs.crc, mask); +} + +int mcp25xxfd_crc_clear_int(struct mcp25xxfd_priv *priv) +{ + return mcp25xxfd_cmd_write_mask(priv->spi, MCP25XXFD_CRC, 0, + MCP25XXFD_CRC_CRCERRIF | + MCP25XXFD_CRC_FERRIF); +} diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_crc.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_crc.h new file mode 100644 index 000000000000..6e42fe0fad0f --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_crc.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ +#ifndef __MCP25XXFD_CRC_H +#define __MCP25XXFD_CRC_H + +#include "mcp25xxfd_priv.h" + +int mcp25xxfd_crc_enable_int(struct mcp25xxfd_priv *priv, bool enable); +int mcp25xxfd_crc_clear_int(struct mcp25xxfd_priv *priv); + +#endif /* __MCP25XXFD_CRC_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_debugfs.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_debugfs.c new file mode 100644 index 000000000000..92ee4d737f84 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_debugfs.c @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#ifdef CONFIG_DEBUG_FS + +#include <linux/debugfs.h> +#include <linux/kernel.h> +#include <linux/seq_file.h> + +#include "mcp25xxfd_cmd.h" +#include "mcp25xxfd_debugfs.h" +#include "mcp25xxfd_priv.h" + +static int mcp25xxfd_debugfs_dump_regs_range(struct seq_file *file, + u32 start, u32 end) +{ + struct spi_device *spi = file->private; + u32 data[32]; + int bytes = end - start + sizeof(*data); + int i, l, count, ret; + + for (count = bytes / sizeof(*data); count > 0; count -= 32) { + /* read up to 32 registers in one go */ + l = min(count, 32); + ret = mcp25xxfd_cmd_read_regs(spi, start, + data, l * sizeof(*data)); + if (ret) + return ret; + /* dump those read registers */ + for (i = 0; i < l; i++, start += sizeof(*data)) + seq_printf(file, "Reg 0x%03x = 0x%08x\n", + start, data[i]); + } + + return 0; +} + +static int mcp25xxfd_debugfs_dump_regs(struct seq_file *file, void *offset) +{ + return mcp25xxfd_debugfs_dump_regs_range(file, MCP25XXFD_OSC, + MCP25XXFD_ECCSTAT); +} + +static int mcp25xxfd_debugfs_dump_can_regs(struct seq_file *file, + void *offset) +{ + return mcp25xxfd_debugfs_dump_regs_range(file, MCP25XXFD_CAN_CON, + MCP25XXFD_CAN_TXQUA); +} + +static int mcp25xxfd_debugfs_dump_can_all_regs(struct seq_file *file, + void *offset) +{ + return mcp25xxfd_debugfs_dump_regs_range(file, MCP25XXFD_CAN_CON, + MCP25XXFD_CAN_FLTMASK(31)); +} + +static void mcp25xxfd_debugfs_mod_setup(struct mcp25xxfd_priv *priv) +{ + struct dentry *root, *regs; + + /* the base directory */ + priv->debugfs_dir = debugfs_create_dir(priv->device_name, NULL); + root = priv->debugfs_dir; + + /* expose some parameters related to clocks */ + debugfs_create_u32("spi_setup_speed_hz", 0444, root, + &priv->spi_setup_speed_hz); + debugfs_create_u32("spi_normal_speed_hz", 0444, root, + &priv->spi_normal_speed_hz); + debugfs_create_u32("spi_use_speed_hz", 0444, root, + &priv->spi_use_speed_hz); + debugfs_create_u32("clk_user_mask", 0444, root, &priv->clk_user_mask); + + /* expose the system registers */ + priv->debugfs_regs_dir = debugfs_create_dir("regs", root); + regs = priv->debugfs_regs_dir; + debugfs_create_x32("osc", 0444, regs, &priv->regs.osc); + debugfs_create_x32("iocon", 0444, regs, &priv->regs.iocon); + debugfs_create_x32("crc", 0444, regs, &priv->regs.crc); + debugfs_create_x32("ecccon", 0444, regs, &priv->regs.ecccon); + + /* dump the controller registers themselves */ + debugfs_create_devm_seqfile(&priv->spi->dev, "regs_live_dump", + root, mcp25xxfd_debugfs_dump_regs); + /* and the essential can registers */ + debugfs_create_devm_seqfile(&priv->spi->dev, "can_regs_live_dump", + root, mcp25xxfd_debugfs_dump_can_regs); + /* and the complete can registers */ + debugfs_create_devm_seqfile(&priv->spi->dev, + "can_regs_all_live_dump", root, + mcp25xxfd_debugfs_dump_can_all_regs); +} + +void mcp25xxfd_debugfs_setup(struct mcp25xxfd_priv *priv) +{ + mcp25xxfd_debugfs_mod_setup(priv); +} + +void mcp25xxfd_debugfs_remove(struct mcp25xxfd_priv *priv) +{ + debugfs_remove_recursive(priv->debugfs_dir); + priv->debugfs_dir = NULL; +} + +#endif /* CONFIG_DEBUG_FS */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_debugfs.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_debugfs.h new file mode 100644 index 000000000000..800672442ffb --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_debugfs.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#ifndef __MCP25XXFD_DEBUGFS_H +#define __MCP25XXFD_DEBUGFS_H + +#include "mcp25xxfd_priv.h" + +#ifdef CONFIG_DEBUG_FS + +void mcp25xxfd_debugfs_setup(struct mcp25xxfd_priv *priv); +void mcp25xxfd_debugfs_remove(struct mcp25xxfd_priv *priv); + +#else + +static inline void mcp25xxfd_debugfs_setup(struct mcp25xxfd_priv *priv) +{ + return 0; +} + +static inline void mcp25xxfd_debugfs_remove(struct mcp25xxfd_priv *priv) +{ +} + +#endif /* CONFIG_DEBUG_FS */ +#endif /* __MCP25XXFD_DEBUGFS_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_ecc.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_ecc.c new file mode 100644 index 000000000000..526f345d0a17 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_ecc.c @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#include <linux/kernel.h> +#include <linux/spi/spi.h> +#include "mcp25xxfd_cmd.h" +#include "mcp25xxfd_ecc.h" +#include "mcp25xxfd_priv.h" +#include "mcp25xxfd_regs.h" + +int mcp25xxfd_ecc_clear_int(struct mcp25xxfd_priv *priv) +{ + u32 val, addr; + int ret; + + /* first report the error address */ + ret = mcp25xxfd_cmd_read(priv->spi, MCP25XXFD_ECCSTAT, &val); + if (ret) + return ret; + + /* if no flags are set then nothing to do */ + if (!(val & (MCP25XXFD_ECCSTAT_SECIF | MCP25XXFD_ECCSTAT_DEDIF))) + return 0; + + addr = (val & MCP25XXFD_ECCSTAT_ERRADDR_MASK) >> + MCP25XXFD_ECCSTAT_ERRADDR_SHIFT; + + dev_err_ratelimited(&priv->spi->dev, "ECC %s bit error at %03x\n", + (val & MCP25XXFD_ECCSTAT_DEDIF) ? + "double" : "single", + addr); + + /* and clear the error */ + return mcp25xxfd_cmd_write_mask(priv->spi, MCP25XXFD_ECCSTAT, 0, + MCP25XXFD_ECCSTAT_SECIF | + MCP25XXFD_ECCSTAT_DEDIF); +} + +int mcp25xxfd_ecc_enable_int(struct mcp25xxfd_priv *priv, bool enable) +{ + u32 mask = MCP25XXFD_ECCCON_SECIE | MCP25XXFD_ECCCON_DEDIE; + + priv->regs.ecccon &= ~mask; + priv->regs.ecccon |= MCP25XXFD_ECCCON_ECCEN | (enable ? mask : 0); + + return mcp25xxfd_cmd_write_mask(priv->spi, MCP25XXFD_ECCCON, + priv->regs.ecccon, + MCP25XXFD_ECCCON_ECCEN | mask); +} + +int mcp25xxfd_ecc_enable(struct mcp25xxfd_priv *priv) +{ + u8 buffer[256]; + int i, ret; + + /* set up RAM ECC - enable interrupts sets it as well */ + ret = mcp25xxfd_ecc_enable_int(priv, false); + if (ret) + return ret; + + /* and clear SRAM so that no reads fails from now on */ + memset(buffer, 0, sizeof(buffer)); + for (i = 0; i < MCP25XXFD_SRAM_SIZE; i += sizeof(buffer)) { + ret = mcp25xxfd_cmd_writen(priv->spi, MCP25XXFD_SRAM_ADDR(i), + buffer, sizeof(buffer)); + if (ret) + return ret; + } + + return 0; +} diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_ecc.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_ecc.h new file mode 100644 index 000000000000..117f58c65a46 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_ecc.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ +#ifndef __MCP25XXFD_ECC_H +#define __MCP25XXFD_ECC_H + +#include "mcp25xxfd_priv.h" + +int mcp25xxfd_ecc_clear_int(struct mcp25xxfd_priv *priv); +int mcp25xxfd_ecc_enable_int(struct mcp25xxfd_priv *priv, bool enable); +int mcp25xxfd_ecc_enable(struct mcp25xxfd_priv *priv); + +#endif /* __MCP25XXFD_ECC_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.c new file mode 100644 index 000000000000..724cc5c45dba --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.c @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#include <linux/kernel.h> +#include <linux/spi/spi.h> + +#include "mcp25xxfd_crc.h" +#include "mcp25xxfd_ecc.h" +#include "mcp25xxfd_int.h" +#include "mcp25xxfd_priv.h" + +int mcp25xxfd_int_clear(struct mcp25xxfd_priv *priv) +{ + int ret; + + ret = mcp25xxfd_ecc_clear_int(priv); + if (ret) + return ret; + ret = mcp25xxfd_crc_clear_int(priv); + + return ret; +} + +int mcp25xxfd_int_enable(struct mcp25xxfd_priv *priv, bool enable) +{ + /* error handling only on enable for this function */ + int ret = 0; + + /* if we enable clear interrupt flags first */ + if (enable) { + ret = mcp25xxfd_int_clear(priv); + if (ret) + goto out; + } + + ret = mcp25xxfd_crc_enable_int(priv, enable); + if (ret) + goto out; + + ret = mcp25xxfd_ecc_enable(priv); + if (ret) + goto out_crc; + + ret = mcp25xxfd_ecc_enable_int(priv, enable); + if (ret) + goto out_crc; + + /* if we disable interrupts clear interrupt flags last */ + if (!enable) + mcp25xxfd_int_clear(priv); + + return 0; + +out_crc: + mcp25xxfd_crc_enable_int(priv, false); +out: + return ret; +} diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.h new file mode 100644 index 000000000000..4daf0182d1af --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ +#ifndef __MCP25XXFD_INT_H +#define __MCP25XXFD_INT_H + +#include "mcp25xxfd_priv.h" + +int mcp25xxfd_int_clear(struct mcp25xxfd_priv *priv); +int mcp25xxfd_int_enable(struct mcp25xxfd_priv *priv, bool enable); + +#endif /* __MCP25XXFD_INT_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_priv.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_priv.h new file mode 100644 index 000000000000..f4ca69a51cf8 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_priv.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ +#ifndef __MCP25XXFD_PRIV_H +#define __MCP25XXFD_PRIV_H + +#include <linux/clk.h> +#include <linux/debugfs.h> +#include <linux/mutex.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include "mcp25xxfd_regs.h" + +/* some defines for the driver */ +#define DEVICE_NAME "mcp25xxfd" + +enum mcp25xxfd_model { + CAN_MCP2517FD = 0x2517, +}; + +struct mcp25xxfd_priv { + struct spi_device *spi; + struct clk *clk; + + /* the actual model of the mcp25xxfd */ + enum mcp25xxfd_model model; + + /* full device name used for debugfs ant interrupts */ + char device_name[32]; + + /* everything clock related */ + int clock_freq; + struct { + /* clock configuration */ + int clock_pll; + int clock_div2; + int clock_odiv; + } config; + + /* lock for enabling/disabling the clock */ + struct mutex clk_user_lock; + u32 clk_user_mask; + u32 clk_sleep_mask; + + /* power related */ + struct regulator *power; + + /* the distinct spi_speeds to use for spi communication */ + u32 spi_setup_speed_hz; + u32 spi_normal_speed_hz; + u32 spi_use_speed_hz; + + /* spi-tx/rx buffers for efficient transfers + * used during setup and irq + */ + struct mutex spi_rxtx_lock; /* protects use of spi_tx/rx */ + u8 spi_tx[MCP25XXFD_SRAM_SIZE]; + u8 spi_rx[MCP25XXFD_SRAM_SIZE]; + + /* configuration registers */ + struct { + u32 osc; + u32 iocon; + u32 crc; + u32 ecccon; + } regs; + + /* debugfs related */ +#if defined(CONFIG_DEBUG_FS) + struct dentry *debugfs_dir; + struct dentry *debugfs_regs_dir; +#endif +}; + +#endif /* __MCP25XXFD_PRIV_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_regs.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_regs.h new file mode 100644 index 000000000000..b500cb46b9a4 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_regs.h @@ -0,0 +1,656 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl <kernel@xxxxxxxxxxxxxxxx> + */ + +#ifndef __MCP25XXFD_REGS_H +#define __MCP25XXFD_REGS_H + +#include <linux/bitops.h> + +/* some constants derived from the datasheets */ +#define MCP25XXFD_OST_DELAY_MS 3 +#define MCP25XXFD_MIN_CLOCK_FREQUENCY 1000000 +#define MCP25XXFD_MAX_CLOCK_FREQUENCY 40000000 +#define MCP25XXFD_PLL_MULTIPLIER 10 +#define MCP25XXFD_AUTO_PLL_MAX_CLOCK_FREQUENCY \ + (MCP25XXFD_MAX_CLOCK_FREQUENCY / MCP25XXFD_PLL_MULTIPLIER) +#define MCP25XXFD_SCLK_DIVIDER 2 + +/* GPIO, clock, ecc related register definitions of Controller itself */ +#define MCP25XXFD_SFR_BASE(x) (0xE00 + (x)) +#define MCP25XXFD_OSC MCP25XXFD_SFR_BASE(0x00) +# define MCP25XXFD_OSC_PLLEN BIT(0) +# define MCP25XXFD_OSC_OSCDIS BIT(2) +# define MCP25XXFD_OSC_SCLKDIV BIT(4) +# define MCP25XXFD_OSC_CLKODIV_BITS 2 +# define MCP25XXFD_OSC_CLKODIV_SHIFT 5 +# define MCP25XXFD_OSC_CLKODIV_MASK \ + GENMASK(MCP25XXFD_OSC_CLKODIV_SHIFT \ + + MCP25XXFD_OSC_CLKODIV_BITS - 1, \ + MCP25XXFD_OSC_CLKODIV_SHIFT) +# define MCP25XXFD_OSC_CLKODIV_10 3 +# define MCP25XXFD_OSC_CLKODIV_4 2 +# define MCP25XXFD_OSC_CLKODIV_2 1 +# define MCP25XXFD_OSC_CLKODIV_1 0 +# define MCP25XXFD_OSC_PLLRDY BIT(8) +# define MCP25XXFD_OSC_OSCRDY BIT(10) +# define MCP25XXFD_OSC_SCLKRDY BIT(12) +#define MCP25XXFD_IOCON MCP25XXFD_SFR_BASE(0x04) +# define MCP25XXFD_IOCON_TRIS0 BIT(0) +# define MCP25XXFD_IOCON_TRIS1 BIT(1) +# define MCP25XXFD_IOCON_XSTBYEN BIT(6) +# define MCP25XXFD_IOCON_LAT0 BIT(8) +# define MCP25XXFD_IOCON_LAT1 BIT(9) +# define MCP25XXFD_IOCON_GPIO0 BIT(16) +# define MCP25XXFD_IOCON_GPIO1 BIT(17) +# define MCP25XXFD_IOCON_PM0 BIT(24) +# define MCP25XXFD_IOCON_PM1 BIT(25) +# define MCP25XXFD_IOCON_TXCANOD BIT(28) +# define MCP25XXFD_IOCON_SOF BIT(29) +# define MCP25XXFD_IOCON_INTOD BIT(30) +#define MCP25XXFD_CRC MCP25XXFD_SFR_BASE(0x08) +# define MCP25XXFD_CRC_MASK GENMASK(15, 0) +# define MCP25XXFD_CRC_CRCERRIE BIT(16) +# define MCP25XXFD_CRC_FERRIE BIT(17) +# define MCP25XXFD_CRC_CRCERRIF BIT(24) +# define MCP25XXFD_CRC_FERRIF BIT(25) +#define MCP25XXFD_ECCCON MCP25XXFD_SFR_BASE(0x0C) +# define MCP25XXFD_ECCCON_ECCEN BIT(0) +# define MCP25XXFD_ECCCON_SECIE BIT(1) +# define MCP25XXFD_ECCCON_DEDIE BIT(2) +# define MCP25XXFD_ECCCON_PARITY_BITS 6 +# define MCP25XXFD_ECCCON_PARITY_SHIFT 8 +# define MCP25XXFD_ECCCON_PARITY_MASK \ + GENMASK(MCP25XXFD_ECCCON_PARITY_SHIFT \ + + MCP25XXFD_ECCCON_PARITY_BITS - 1, \ + MCP25XXFD_ECCCON_PARITY_SHIFT) +#define MCP25XXFD_ECCSTAT MCP25XXFD_SFR_BASE(0x10) +# define MCP25XXFD_ECCSTAT_SECIF BIT(1) +# define MCP25XXFD_ECCSTAT_DEDIF BIT(2) +# define MCP25XXFD_ECCSTAT_ERRADDR_SHIFT 8 +# define MCP25XXFD_ECCSTAT_ERRADDR_MASK \ + GENMASK(MCP25XXFD_ECCSTAT_ERRADDR_SHIFT + 11, \ + MCP25XXFD_ECCSTAT_ERRADDR_SHIFT) + +/* CAN related register definitions of Controller CAN block */ +#define MCP25XXFD_CAN_SFR_BASE(x) (0x000 + (x)) +#define MCP25XXFD_CAN_CON \ + MCP25XXFD_CAN_SFR_BASE(0x00) +# define MCP25XXFD_CAN_CON_DNCNT_BITS 5 +# define MCP25XXFD_CAN_CON_DNCNT_SHIFT 0 +# define MCP25XXFD_CAN_CON_DNCNT_MASK \ + GENMASK(MCP25XXFD_CAN_CON_DNCNT_SHIFT + \ + MCP25XXFD_CAN_CON_DNCNT_BITS - 1, \ + MCP25XXFD_CAN_CON_DNCNT_SHIFT) +# define MCP25XXFD_CAN_CON_ISOCRCEN BIT(5) +# define MCP25XXFD_CAN_CON_PXEDIS BIT(6) +# define MCP25XXFD_CAN_CON_WAKFIL BIT(8) +# define MCP25XXFD_CAN_CON_WFT_BITS 2 +# define MCP25XXFD_CAN_CON_WFT_SHIFT 9 +# define MCP25XXFD_CAN_CON_WFT_MASK \ + GENMASK(MCP25XXFD_CAN_CON_WFT_SHIFT + \ + MCP25XXFD_CAN_CON_WFT_BITS - 1, \ + MCP25XXFD_CAN_CON_WFT_SHIFT) +# define MCP25XXFD_CAN_CON_BUSY BIT(11) +# define MCP25XXFD_CAN_CON_BRSDIS BIT(12) +# define MCP25XXFD_CAN_CON_RTXAT BIT(16) +# define MCP25XXFD_CAN_CON_ESIGM BIT(17) +# define MCP25XXFD_CAN_CON_SERR2LOM BIT(18) +# define MCP25XXFD_CAN_CON_STEF BIT(19) +# define MCP25XXFD_CAN_CON_TXQEN BIT(20) +# define MCP25XXFD_CAN_CON_OPMODE_BITS 3 +# define MCP25XXFD_CAN_CON_OPMOD_SHIFT 21 +# define MCP25XXFD_CAN_CON_OPMOD_MASK \ + GENMASK(MCP25XXFD_CAN_CON_OPMOD_SHIFT + \ + MCP25XXFD_CAN_CON_OPMODE_BITS - 1, \ + MCP25XXFD_CAN_CON_OPMOD_SHIFT) +# define MCP25XXFD_CAN_CON_REQOP_BITS 3 +# define MCP25XXFD_CAN_CON_REQOP_SHIFT 24 +# define MCP25XXFD_CAN_CON_REQOP_MASK \ + GENMASK(MCP25XXFD_CAN_CON_REQOP_SHIFT + \ + MCP25XXFD_CAN_CON_REQOP_BITS - 1, \ + MCP25XXFD_CAN_CON_REQOP_SHIFT) +# define MCP25XXFD_CAN_CON_MODE_MIXED 0 +# define MCP25XXFD_CAN_CON_MODE_SLEEP 1 +# define MCP25XXFD_CAN_CON_MODE_INT_LOOPBACK 2 +# define MCP25XXFD_CAN_CON_MODE_LISTENONLY 3 +# define MCP25XXFD_CAN_CON_MODE_CONFIG 4 +# define MCP25XXFD_CAN_CON_MODE_EXT_LOOPBACK 5 +# define MCP25XXFD_CAN_CON_MODE_CAN2_0 6 +# define MCP25XXFD_CAN_CON_MODE_RESTRICTED 7 +# define MCP25XXFD_CAN_CON_ABAT BIT(27) +# define MCP25XXFD_CAN_CON_TXBWS_BITS 3 +# define MCP25XXFD_CAN_CON_TXBWS_SHIFT 28 +# define MCP25XXFD_CAN_CON_TXBWS_MASK \ + GENMASK(MCP25XXFD_CAN_CON_TXBWS_SHIFT + \ + MCP25XXFD_CAN_CON_TXBWS_BITS - 1, \ + MCP25XXFD_CAN_CON_TXBWS_SHIFT) +# define MCP25XXFD_CAN_CON_DEFAULT \ + (MCP25XXFD_CAN_CON_ISOCRCEN | \ + MCP25XXFD_CAN_CON_PXEDIS | \ + MCP25XXFD_CAN_CON_WAKFIL | \ + (3 << MCP25XXFD_CAN_CON_WFT_SHIFT) | \ + MCP25XXFD_CAN_CON_STEF | \ + MCP25XXFD_CAN_CON_TXQEN | \ + (MCP25XXFD_CAN_CON_MODE_CONFIG << MCP25XXFD_CAN_CON_OPMOD_SHIFT) | \ + (MCP25XXFD_CAN_CON_MODE_CONFIG << MCP25XXFD_CAN_CON_REQOP_SHIFT)) +# define MCP25XXFD_CAN_CON_DEFAULT_MASK \ + (MCP25XXFD_CAN_CON_DNCNT_MASK | \ + MCP25XXFD_CAN_CON_ISOCRCEN | \ + MCP25XXFD_CAN_CON_PXEDIS | \ + MCP25XXFD_CAN_CON_WAKFIL | \ + MCP25XXFD_CAN_CON_WFT_MASK | \ + MCP25XXFD_CAN_CON_BRSDIS | \ + MCP25XXFD_CAN_CON_RTXAT | \ + MCP25XXFD_CAN_CON_ESIGM | \ + MCP25XXFD_CAN_CON_SERR2LOM | \ + MCP25XXFD_CAN_CON_STEF | \ + MCP25XXFD_CAN_CON_TXQEN | \ + MCP25XXFD_CAN_CON_OPMOD_MASK | \ + MCP25XXFD_CAN_CON_REQOP_MASK | \ + MCP25XXFD_CAN_CON_ABAT | \ + MCP25XXFD_CAN_CON_TXBWS_MASK) +#define MCP25XXFD_CAN_NBTCFG MCP25XXFD_CAN_SFR_BASE(0x04) +# define MCP25XXFD_CAN_NBTCFG_SJW_BITS 7 +# define MCP25XXFD_CAN_NBTCFG_SJW_SHIFT 0 +# define MCP25XXFD_CAN_NBTCFG_SJW_MASK \ + GENMASK(MCP25XXFD_CAN_NBTCFG_SJW_SHIFT + \ + MCP25XXFD_CAN_NBTCFG_SJW_BITS - 1, \ + MCP25XXFD_CAN_NBTCFG_SJW_SHIFT) +# define MCP25XXFD_CAN_NBTCFG_TSEG2_BITS 7 +# define MCP25XXFD_CAN_NBTCFG_TSEG2_SHIFT 8 +# define MCP25XXFD_CAN_NBTCFG_TSEG2_MASK \ + GENMASK(MCP25XXFD_CAN_NBTCFG_TSEG2_SHIFT + \ + MCP25XXFD_CAN_NBTCFG_TSEG2_BITS - 1, \ + MCP25XXFD_CAN_NBTCFG_TSEG2_SHIFT) +# define MCP25XXFD_CAN_NBTCFG_TSEG1_BITS 8 +# define MCP25XXFD_CAN_NBTCFG_TSEG1_SHIFT 16 +# define MCP25XXFD_CAN_NBTCFG_TSEG1_MASK \ + GENMASK(MCP25XXFD_CAN_NBTCFG_TSEG1_SHIFT + \ + MCP25XXFD_CAN_NBTCFG_TSEG1_BITS - 1, \ + MCP25XXFD_CAN_NBTCFG_TSEG1_SHIFT) +# define MCP25XXFD_CAN_NBTCFG_BRP_BITS 8 +# define MCP25XXFD_CAN_NBTCFG_BRP_SHIFT 24 +# define MCP25XXFD_CAN_NBTCFG_BRP_MASK \ + GENMASK(MCP25XXFD_CAN_NBTCFG_BRP_SHIFT + \ + MCP25XXFD_CAN_NBTCFG_BRP_BITS - 1, \ + MCP25XXFD_CAN_NBTCFG_BRP_SHIFT) +#define MCP25XXFD_CAN_DBTCFG MCP25XXFD_CAN_SFR_BASE(0x08) +# define MCP25XXFD_CAN_DBTCFG_SJW_BITS 4 +# define MCP25XXFD_CAN_DBTCFG_SJW_SHIFT 0 +# define MCP25XXFD_CAN_DBTCFG_SJW_MASK \ + GENMASK(MCP25XXFD_CAN_DBTCFG_SJW_SHIFT + \ + MCP25XXFD_CAN_DBTCFG_SJW_BITS - 1, \ + MCP25XXFD_CAN_DBTCFG_SJW_SHIFT) +# define MCP25XXFD_CAN_DBTCFG_TSEG2_BITS 4 +# define MCP25XXFD_CAN_DBTCFG_TSEG2_SHIFT 8 +# define MCP25XXFD_CAN_DBTCFG_TSEG2_MASK \ + GENMASK(MCP25XXFD_CAN_DBTCFG_TSEG2_SHIFT + \ + MCP25XXFD_CAN_DBTCFG_TSEG2_BITS - 1, \ + MCP25XXFD_CAN_DBTCFG_TSEG2_SHIFT) +# define MCP25XXFD_CAN_DBTCFG_TSEG1_BITS 5 +# define MCP25XXFD_CAN_DBTCFG_TSEG1_SHIFT 16 +# define MCP25XXFD_CAN_DBTCFG_TSEG1_MASK \ + GENMASK(MCP25XXFD_CAN_DBTCFG_TSEG1_SHIFT + \ + MCP25XXFD_CAN_DBTCFG_TSEG1_BITS - 1, \ + MCP25XXFD_CAN_DBTCFG_TSEG1_SHIFT) +# define MCP25XXFD_CAN_DBTCFG_BRP_BITS 8 +# define MCP25XXFD_CAN_DBTCFG_BRP_SHIFT 24 +# define MCP25XXFD_CAN_DBTCFG_BRP_MASK \ + GENMASK(MCP25XXFD_CAN_DBTCFG_BRP_SHIFT + \ + MCP25XXFD_CAN_DBTCFG_BRP_BITS - 1, \ + MCP25XXFD_CAN_DBTCFG_BRP_SHIFT) +#define MCP25XXFD_CAN_TDC MCP25XXFD_CAN_SFR_BASE(0x0C) +# define MCP25XXFD_CAN_TDC_TDCV_BITS 5 +# define MCP25XXFD_CAN_TDC_TDCV_SHIFT 0 +# define MCP25XXFD_CAN_TDC_TDCV_MASK \ + GENMASK(MCP25XXFD_CAN_TDC_TDCV_SHIFT + \ + MCP25XXFD_CAN_TDC_TDCV_BITS - 1, \ + MCP25XXFD_CAN_TDC_TDCV_SHIFT) +# define MCP25XXFD_CAN_TDC_TDCO_BITS 5 +# define MCP25XXFD_CAN_TDC_TDCO_SHIFT 8 +# define MCP25XXFD_CAN_TDC_TDCO_MASK \ + GENMASK(MCP25XXFD_CAN_TDC_TDCO_SHIFT + \ + MCP25XXFD_CAN_TDC_TDCO_BITS - 1, \ + MCP25XXFD_CAN_TDC_TDCO_SHIFT) +# define MCP25XXFD_CAN_TDC_TDCMOD_BITS 2 +# define MCP25XXFD_CAN_TDC_TDCMOD_SHIFT 16 +# define MCP25XXFD_CAN_TDC_TDCMOD_MASK \ + GENMASK(MCP25XXFD_CAN_TDC_TDCMOD_SHIFT + \ + MCP25XXFD_CAN_TDC_TDCMOD_BITS - 1, \ + MCP25XXFD_CAN_TDC_TDCMOD_SHIFT) +# define MCP25XXFD_CAN_TDC_TDCMOD_DISABLED 0 +# define MCP25XXFD_CAN_TDC_TDCMOD_MANUAL 1 +# define MCP25XXFD_CAN_TDC_TDCMOD_AUTO 2 +# define MCP25XXFD_CAN_TDC_SID11EN BIT(24) +# define MCP25XXFD_CAN_TDC_EDGFLTEN BIT(25) +#define MCP25XXFD_CAN_TBC MCP25XXFD_CAN_SFR_BASE(0x10) +#define MCP25XXFD_CAN_TSCON MCP25XXFD_CAN_SFR_BASE(0x14) +# define MCP25XXFD_CAN_TSCON_TBCPRE_BITS 10 +# define MCP25XXFD_CAN_TSCON_TBCPRE_SHIFT 0 +# define MCP25XXFD_CAN_TSCON_TBCPRE_MASK \ + GENMASK(MCP25XXFD_CAN_TSCON_TBCPRE_SHIFT + \ + MCP25XXFD_CAN_TSCON_TBCPRE_BITS - 1, \ + MCP25XXFD_CAN_TSCON_TBCPRE_SHIFT) +# define MCP25XXFD_CAN_TSCON_TBCEN BIT(16) +# define MCP25XXFD_CAN_TSCON_TSEOF BIT(17) +# define MCP25XXFD_CAN_TSCON_TSRES BIT(18) +#define MCP25XXFD_CAN_VEC MCP25XXFD_CAN_SFR_BASE(0x18) +# define MCP25XXFD_CAN_VEC_ICODE_BITS 7 +# define MCP25XXFD_CAN_VEC_ICODE_SHIFT 0 +# define MCP25XXFD_CAN_VEC_ICODE_MASK \ + GENMASK(MCP25XXFD_CAN_VEC_ICODE_SHIFT + \ + MCP25XXFD_CAN_VEC_ICODE_BITS - 1, \ + MCP25XXFD_CAN_VEC_ICODE_SHIFT) +# define MCP25XXFD_CAN_VEC_FILHIT_BITS 5 +# define MCP25XXFD_CAN_VEC_FILHIT_SHIFT 8 +# define MCP25XXFD_CAN_VEC_FILHIT_MASK \ + GENMASK(MCP25XXFD_CAN_VEC_FILHIT_SHIFT + \ + MCP25XXFD_CAN_VEC_FILHIT_BITS - 1, \ + MCP25XXFD_CAN_VEC_FILHIT_SHIFT) +# define MCP25XXFD_CAN_VEC_TXCODE_BITS 7 +# define MCP25XXFD_CAN_VEC_TXCODE_SHIFT 16 +# define MCP25XXFD_CAN_VEC_TXCODE_MASK \ + GENMASK(MCP25XXFD_CAN_VEC_TXCODE_SHIFT + \ + MCP25XXFD_CAN_VEC_TXCODE_BITS - 1, \ + MCP25XXFD_CAN_VEC_TXCODE_SHIFT) +# define MCP25XXFD_CAN_VEC_RXCODE_BITS 7 +# define MCP25XXFD_CAN_VEC_RXCODE_SHIFT 24 +# define MCP25XXFD_CAN_VEC_RXCODE_MASK \ + GENMASK(MCP25XXFD_CAN_VEC_RXCODE_SHIFT + \ + MCP25XXFD_CAN_VEC_RXCODE_BITS - 1, \ + MCP25XXFD_CAN_VEC_RXCODE_SHIFT) +#define MCP25XXFD_CAN_INT MCP25XXFD_CAN_SFR_BASE(0x1C) +# define MCP25XXFD_CAN_INT_IF_SHIFT 0 +# define MCP25XXFD_CAN_INT_TXIF BIT(0) +# define MCP25XXFD_CAN_INT_RXIF BIT(1) +# define MCP25XXFD_CAN_INT_TBCIF BIT(2) +# define MCP25XXFD_CAN_INT_MODIF BIT(3) +# define MCP25XXFD_CAN_INT_TEFIF BIT(4) +# define MCP25XXFD_CAN_INT_ECCIF BIT(8) +# define MCP25XXFD_CAN_INT_SPICRCIF BIT(9) +# define MCP25XXFD_CAN_INT_TXATIF BIT(10) +# define MCP25XXFD_CAN_INT_RXOVIF BIT(11) +# define MCP25XXFD_CAN_INT_SERRIF BIT(12) +# define MCP25XXFD_CAN_INT_CERRIF BIT(13) +# define MCP25XXFD_CAN_INT_WAKIF BIT(14) +# define MCP25XXFD_CAN_INT_IVMIF BIT(15) +# define MCP25XXFD_CAN_INT_IF_MASK \ + (MCP25XXFD_CAN_INT_TXIF | \ + MCP25XXFD_CAN_INT_RXIF | \ + MCP25XXFD_CAN_INT_TBCIF | \ + MCP25XXFD_CAN_INT_MODIF | \ + MCP25XXFD_CAN_INT_TEFIF | \ + MCP25XXFD_CAN_INT_ECCIF | \ + MCP25XXFD_CAN_INT_SPICRCIF | \ + MCP25XXFD_CAN_INT_TXATIF | \ + MCP25XXFD_CAN_INT_RXOVIF | \ + MCP25XXFD_CAN_INT_CERRIF | \ + MCP25XXFD_CAN_INT_SERRIF | \ + MCP25XXFD_CAN_INT_WAKIF | \ + MCP25XXFD_CAN_INT_IVMIF) +# define MCP25XXFD_CAN_INT_IF_CLEAR_MASK \ + (MCP25XXFD_CAN_INT_TBCIF | \ + MCP25XXFD_CAN_INT_MODIF | \ + MCP25XXFD_CAN_INT_CERRIF | \ + MCP25XXFD_CAN_INT_SERRIF | \ + MCP25XXFD_CAN_INT_WAKIF | \ + MCP25XXFD_CAN_INT_IVMIF) +# define MCP25XXFD_CAN_INT_IE_SHIFT 16 +# define MCP25XXFD_CAN_INT_TXIE \ + (MCP25XXFD_CAN_INT_TXIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_RXIE \ + (MCP25XXFD_CAN_INT_RXIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_TBCIE \ + (MCP25XXFD_CAN_INT_TBCIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_MODIE \ + (MCP25XXFD_CAN_INT_MODIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_TEFIE \ + (MCP25XXFD_CAN_INT_TEFIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_ECCIE \ + (MCP25XXFD_CAN_INT_ECCIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_SPICRCIE \ + (MCP25XXFD_CAN_INT_SPICRCIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_TXATIE \ + (MCP25XXFD_CAN_INT_TXATIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_RXOVIE \ + (MCP25XXFD_CAN_INT_RXOVIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_CERRIE \ + (MCP25XXFD_CAN_INT_CERRIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_SERRIE \ + (MCP25XXFD_CAN_INT_SERRIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_WAKIE \ + (MCP25XXFD_CAN_INT_WAKIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_IVMIE \ + (MCP25XXFD_CAN_INT_IVMIF << MCP25XXFD_CAN_INT_IE_SHIFT) +# define MCP25XXFD_CAN_INT_IE_MASK \ + (MCP25XXFD_CAN_INT_TXIE | \ + MCP25XXFD_CAN_INT_RXIE | \ + MCP25XXFD_CAN_INT_TBCIE | \ + MCP25XXFD_CAN_INT_MODIE | \ + MCP25XXFD_CAN_INT_TEFIE | \ + MCP25XXFD_CAN_INT_ECCIE | \ + MCP25XXFD_CAN_INT_SPICRCIE | \ + MCP25XXFD_CAN_INT_TXATIE | \ + MCP25XXFD_CAN_INT_RXOVIE | \ + MCP25XXFD_CAN_INT_CERRIE | \ + MCP25XXFD_CAN_INT_SERRIE | \ + MCP25XXFD_CAN_INT_WAKIE | \ + MCP25XXFD_CAN_INT_IVMIE) +#define MCP25XXFD_CAN_RXIF MCP25XXFD_CAN_SFR_BASE(0x20) +#define MCP25XXFD_CAN_TXIF MCP25XXFD_CAN_SFR_BASE(0x24) +#define MCP25XXFD_CAN_RXOVIF MCP25XXFD_CAN_SFR_BASE(0x28) +#define MCP25XXFD_CAN_TXATIF MCP25XXFD_CAN_SFR_BASE(0x2C) +#define MCP25XXFD_CAN_TXREQ MCP25XXFD_CAN_SFR_BASE(0x30) +#define MCP25XXFD_CAN_TREC MCP25XXFD_CAN_SFR_BASE(0x34) +# define MCP25XXFD_CAN_TREC_REC_BITS 8 +# define MCP25XXFD_CAN_TREC_REC_SHIFT 0 +# define MCP25XXFD_CAN_TREC_REC_MASK \ + GENMASK(MCP25XXFD_CAN_TREC_REC_SHIFT + \ + MCP25XXFD_CAN_TREC_REC_BITS - 1, \ + MCP25XXFD_CAN_TREC_REC_SHIFT) +# define MCP25XXFD_CAN_TREC_TEC_BITS 8 +# define MCP25XXFD_CAN_TREC_TEC_SHIFT 8 +# define MCP25XXFD_CAN_TREC_TEC_MASK \ + GENMASK(MCP25XXFD_CAN_TREC_TEC_SHIFT + \ + MCP25XXFD_CAN_TREC_TEC_BITS - 1, \ + MCP25XXFD_CAN_TREC_TEC_SHIFT) +# define MCP25XXFD_CAN_TREC_EWARN BIT(16) +# define MCP25XXFD_CAN_TREC_RXWARN BIT(17) +# define MCP25XXFD_CAN_TREC_TXWARN BIT(18) +# define MCP25XXFD_CAN_TREC_RXBP BIT(19) +# define MCP25XXFD_CAN_TREC_TXBP BIT(20) +# define MCP25XXFD_CAN_TREC_TXBO BIT(21) +#define MCP25XXFD_CAN_BDIAG0 MCP25XXFD_CAN_SFR_BASE(0x38) +# define MCP25XXFD_CAN_BDIAG0_NRERRCNT_BITS 8 +# define MCP25XXFD_CAN_BDIAG0_NRERRCNT_SHIFT 0 +# define MCP25XXFD_CAN_BDIAG0_NRERRCNT_MASK \ + GENMASK(MCP25XXFD_CAN_BDIAG0_NRERRCNT_SHIFT + \ + MCP25XXFD_CAN_BDIAG0_NRERRCNT_BITS - 1, \ + MCP25XXFD_CAN_BDIAG0_NRERRCNT_SHIFT) +# define MCP25XXFD_CAN_BDIAG0_NTERRCNT_BITS 8 +# define MCP25XXFD_CAN_BDIAG0_NTERRCNT_SHIFT 8 +# define MCP25XXFD_CAN_BDIAG0_NTERRCNT_MASK \ + GENMASK(MCP25XXFD_CAN_BDIAG0_NTERRCNT_SHIFT + \ + MCP25XXFD_CAN_BDIAG0_NTERRCNT_BITS - 1, \ + MCP25XXFD_CAN_BDIAG0_NTERRCNT_SHIFT) +# define MCP25XXFD_CAN_BDIAG0_DRERRCNT_BITS 8 +# define MCP25XXFD_CAN_BDIAG0_DRERRCNT_SHIFT 16 +# define MCP25XXFD_CAN_BDIAG0_DRERRCNT_MASK \ + GENMASK(MCP25XXFD_CAN_BDIAG0_DRERRCNT_SHIFT + \ + MCP25XXFD_CAN_BDIAG0_DRERRCNT_BITS - 1, \ + MCP25XXFD_CAN_BDIAG0_DRERRCNT_SHIFT) +# define MCP25XXFD_CAN_BDIAG0_DTERRCNT_BITS 8 +# define MCP25XXFD_CAN_BDIAG0_DTERRCNT_SHIFT 24 +# define MCP25XXFD_CAN_BDIAG0_DTERRCNT_MASK \ + GENMASK(MCP25XXFD_CAN_BDIAG0_DTERRCNT_SHIFT + \ + MCP25XXFD_CAN_BDIAG0_DTERRCNT_BITS - 1, \ + MCP25XXFD_CAN_BDIAG0_DTERRCNT_SHIFT) +#define MCP25XXFD_CAN_BDIAG1 MCP25XXFD_CAN_SFR_BASE(0x3C) +# define MCP25XXFD_CAN_BDIAG1_EFMSGCNT_BITS 16 +# define MCP25XXFD_CAN_BDIAG1_EFMSGCNT_SHIFT 0 +# define MCP25XXFD_CAN_BDIAG1_EFMSGCNT_MASK \ + GENMASK(MCP25XXFD_CAN_BDIAG1_EFMSGCNT_SHIFT + \ + MCP25XXFD_CAN_BDIAG1_EFMSGCNT_BITS - 1, \ + MCP25XXFD_CAN_BDIAG1_EFMSGCNT_SHIFT) +# define MCP25XXFD_CAN_BDIAG1_NBIT0ERR BIT(16) +# define MCP25XXFD_CAN_BDIAG1_NBIT1ERR BIT(17) +# define MCP25XXFD_CAN_BDIAG1_NACKERR BIT(18) +# define MCP25XXFD_CAN_BDIAG1_NSTUFERR BIT(19) +# define MCP25XXFD_CAN_BDIAG1_NFORMERR BIT(20) +# define MCP25XXFD_CAN_BDIAG1_NCRCERR BIT(21) +# define MCP25XXFD_CAN_BDIAG1_TXBOERR BIT(23) +# define MCP25XXFD_CAN_BDIAG1_DBIT0ERR BIT(24) +# define MCP25XXFD_CAN_BDIAG1_DBIT1ERR BIT(25) +# define MCP25XXFD_CAN_BDIAG1_DFORMERR BIT(27) +# define MCP25XXFD_CAN_BDIAG1_DSTUFERR BIT(28) +# define MCP25XXFD_CAN_BDIAG1_DCRCERR BIT(29) +# define MCP25XXFD_CAN_BDIAG1_ESI BIT(30) +# define MCP25XXFD_CAN_BDIAG1_DLCMM BIT(31) +#define MCP25XXFD_CAN_TEFCON MCP25XXFD_CAN_SFR_BASE(0x40) +# define MCP25XXFD_CAN_TEFCON_TEFNEIE BIT(0) +# define MCP25XXFD_CAN_TEFCON_TEFHIE BIT(1) +# define MCP25XXFD_CAN_TEFCON_TEFFIE BIT(2) +# define MCP25XXFD_CAN_TEFCON_TEFOVIE BIT(3) +# define MCP25XXFD_CAN_TEFCON_TEFTSEN BIT(5) +# define MCP25XXFD_CAN_TEFCON_UINC BIT(8) +# define MCP25XXFD_CAN_TEFCON_FRESET BIT(10) +# define MCP25XXFD_CAN_TEFCON_FSIZE_BITS 5 +# define MCP25XXFD_CAN_TEFCON_FSIZE_SHIFT 24 +# define MCP25XXFD_CAN_TEFCON_FSIZE_MASK \ + GENMASK(MCP25XXFD_CAN_TEFCON_FSIZE_SHIFT + \ + MCP25XXFD_CAN_TEFCON_FSIZE_BITS - 1, \ + MCP25XXFD_CAN_TEFCON_FSIZE_SHIFT) +#define MCP25XXFD_CAN_TEFSTA MCP25XXFD_CAN_SFR_BASE(0x44) +# define MCP25XXFD_CAN_TEFSTA_TEFNEIF BIT(0) +# define MCP25XXFD_CAN_TEFSTA_TEFHIF BIT(1) +# define MCP25XXFD_CAN_TEFSTA_TEFFIF BIT(2) +# define MCP25XXFD_CAN_TEFSTA_TEVOVIF BIT(3) +#define MCP25XXFD_CAN_TEFUA MCP25XXFD_CAN_SFR_BASE(0x48) +#define MCP25XXFD_CAN_RESERVED MCP25XXFD_CAN_SFR_BASE(0x4C) +#define MCP25XXFD_CAN_TXQCON MCP25XXFD_CAN_SFR_BASE(0x50) +# define MCP25XXFD_CAN_TXQCON_TXQNIE BIT(0) +# define MCP25XXFD_CAN_TXQCON_TXQEIE BIT(2) +# define MCP25XXFD_CAN_TXQCON_TXATIE BIT(4) +# define MCP25XXFD_CAN_TXQCON_TXEN BIT(7) +# define MCP25XXFD_CAN_TXQCON_UINC BIT(8) +# define MCP25XXFD_CAN_TXQCON_TXREQ BIT(9) +# define MCP25XXFD_CAN_TXQCON_FRESET BIT(10) +# define MCP25XXFD_CAN_TXQCON_TXPRI_BITS 5 +# define MCP25XXFD_CAN_TXQCON_TXPRI_SHIFT 16 +# define MCP25XXFD_CAN_TXQCON_TXPRI_MASK \ + GENMASK(MCP25XXFD_CAN_TXQCON_TXPRI_SHIFT + \ + MCP25XXFD_CAN_TXQCON_TXPRI_BITS - 1, \ + MCP25XXFD_CAN_TXQCON_TXPRI_SHIFT) +# define MCP25XXFD_CAN_TXQCON_TXAT_BITS 2 +# define MCP25XXFD_CAN_TXQCON_TXAT_SHIFT 21 +# define MCP25XXFD_CAN_TXQCON_TXAT_MASK \ + GENMASK(MCP25XXFD_CAN_TXQCON_TXAT_SHIFT + \ + #MCP25XXFD_CAN_TXQCON_TXAT_BITS - 1, \ + MCP25XXFD_CAN_TXQCON_TXAT_SHIFT) +# define MCP25XXFD_CAN_TXQCON_FSIZE_BITS 5 +# define MCP25XXFD_CAN_TXQCON_FSIZE_SHIFT 24 +# define MCP25XXFD_CAN_TXQCON_FSIZE_MASK \ + GENMASK(MCP25XXFD_CAN_TXQCON_FSIZE_SHIFT + \ + MCP25XXFD_CAN_TXQCON_FSIZE_BITS - 1, \ + MCP25XXFD_CAN_TXQCON_FSIZE_SHIFT) +# define MCP25XXFD_CAN_TXQCON_PLSIZE_BITS 3 +# define MCP25XXFD_CAN_TXQCON_PLSIZE_SHIFT 29 +# define MCP25XXFD_CAN_TXQCON_PLSIZE_MASK \ + GENMASK(MCP25XXFD_CAN_TXQCON_PLSIZE_SHIFT + \ + MCP25XXFD_CAN_TXQCON_PLSIZE_BITS - 1, \ + MCP25XXFD_CAN_TXQCON_PLSIZE_SHIFT) +# define MCP25XXFD_CAN_TXQCON_PLSIZE_8 0 +# define MCP25XXFD_CAN_TXQCON_PLSIZE_12 1 +# define MCP25XXFD_CAN_TXQCON_PLSIZE_16 2 +# define MCP25XXFD_CAN_TXQCON_PLSIZE_20 3 +# define MCP25XXFD_CAN_TXQCON_PLSIZE_24 4 +# define MCP25XXFD_CAN_TXQCON_PLSIZE_32 5 +# define MCP25XXFD_CAN_TXQCON_PLSIZE_48 6 +# define MCP25XXFD_CAN_TXQCON_PLSIZE_64 7 + +#define MCP25XXFD_CAN_TXQSTA MCP25XXFD_CAN_SFR_BASE(0x54) +# define MCP25XXFD_CAN_TXQSTA_TXQNIF BIT(0) +# define MCP25XXFD_CAN_TXQSTA_TXQEIF BIT(2) +# define MCP25XXFD_CAN_TXQSTA_TXATIF BIT(4) +# define MCP25XXFD_CAN_TXQSTA_TXERR BIT(5) +# define MCP25XXFD_CAN_TXQSTA_TXLARB BIT(6) +# define MCP25XXFD_CAN_TXQSTA_TXABT BIT(7) +# define MCP25XXFD_CAN_TXQSTA_TXQCI_BITS 5 +# define MCP25XXFD_CAN_TXQSTA_TXQCI_SHIFT 8 +# define MCP25XXFD_CAN_TXQSTA_TXQCI_MASK \ + GENMASK(MCP25XXFD_CAN_TXQSTA_TXQCI_SHIFT + \ + MCP25XXFD_CAN_TXQSTA_TXQCI_BITS - 1, \ + MCP25XXFD_CAN_TXQSTA_TXQCI_SHIFT) + +#define MCP25XXFD_CAN_TXQUA MCP25XXFD_CAN_SFR_BASE(0x58) +#define MCP25XXFD_CAN_FIFOCON(x) \ + MCP25XXFD_CAN_SFR_BASE(0x5C + 12 * ((x) - 1)) +#define MCP25XXFD_CAN_FIFOCON_TFNRFNIE BIT(0) +#define MCP25XXFD_CAN_FIFOCON_TFHRFHIE BIT(1) +#define MCP25XXFD_CAN_FIFOCON_TFERFFIE BIT(2) +#define MCP25XXFD_CAN_FIFOCON_RXOVIE BIT(3) +#define MCP25XXFD_CAN_FIFOCON_TXATIE BIT(4) +#define MCP25XXFD_CAN_FIFOCON_RXTSEN BIT(5) +#define MCP25XXFD_CAN_FIFOCON_RTREN BIT(6) +#define MCP25XXFD_CAN_FIFOCON_TXEN BIT(7) +#define MCP25XXFD_CAN_FIFOCON_UINC BIT(8) +#define MCP25XXFD_CAN_FIFOCON_TXREQ BIT(9) +#define MCP25XXFD_CAN_FIFOCON_FRESET BIT(10) +# define MCP25XXFD_CAN_FIFOCON_TXPRI_BITS 5 +# define MCP25XXFD_CAN_FIFOCON_TXPRI_SHIFT 16 +# define MCP25XXFD_CAN_FIFOCON_TXPRI_MASK \ + GENMASK(MCP25XXFD_CAN_FIFOCON_TXPRI_SHIFT + \ + MCP25XXFD_CAN_FIFOCON_TXPRI_BITS - 1, \ + MCP25XXFD_CAN_FIFOCON_TXPRI_SHIFT) +# define MCP25XXFD_CAN_FIFOCON_TXAT_BITS 2 +# define MCP25XXFD_CAN_FIFOCON_TXAT_SHIFT 21 +# define MCP25XXFD_CAN_FIFOCON_TXAT_MASK \ + GENMASK(MCP25XXFD_CAN_FIFOCON_TXAT_SHIFT + \ + MCP25XXFD_CAN_FIFOCON_TXAT_BITS - 1, \ + MCP25XXFD_CAN_FIFOCON_TXAT_SHIFT) +# define MCP25XXFD_CAN_FIFOCON_TXAT_ONE_SHOT 0 +# define MCP25XXFD_CAN_FIFOCON_TXAT_THREE_SHOT 1 +# define MCP25XXFD_CAN_FIFOCON_TXAT_UNLIMITED 2 +# define MCP25XXFD_CAN_FIFOCON_FSIZE_BITS 5 +# define MCP25XXFD_CAN_FIFOCON_FSIZE_SHIFT 24 +# define MCP25XXFD_CAN_FIFOCON_FSIZE_MASK \ + GENMASK(MCP25XXFD_CAN_FIFOCON_FSIZE_SHIFT + \ + MCP25XXFD_CAN_FIFOCON_FSIZE_BITS - 1, \ + MCP25XXFD_CAN_FIFOCON_FSIZE_SHIFT) +# define MCP25XXFD_CAN_FIFOCON_PLSIZE_BITS 3 +# define MCP25XXFD_CAN_FIFOCON_PLSIZE_SHIFT 29 +# define MCP25XXFD_CAN_FIFOCON_PLSIZE_MASK \ + GENMASK(MCP25XXFD_CAN_FIFOCON_PLSIZE_SHIFT + \ + MCP25XXFD_CAN_FIFOCON_PLSIZE_BITS - 1, \ + MCP25XXFD_CAN_FIFOCON_PLSIZE_SHIFT) +#define MCP25XXFD_CAN_FIFOSTA(x) \ + MCP25XXFD_CAN_SFR_BASE(0x60 + 12 * ((x) - 1)) +# define MCP25XXFD_CAN_FIFOSTA_TFNRFNIF BIT(0) +# define MCP25XXFD_CAN_FIFOSTA_TFHRFHIF BIT(1) +# define MCP25XXFD_CAN_FIFOSTA_TFERFFIF BIT(2) +# define MCP25XXFD_CAN_FIFOSTA_RXOVIF BIT(3) +# define MCP25XXFD_CAN_FIFOSTA_TXATIF BIT(4) +# define MCP25XXFD_CAN_FIFOSTA_TXERR BIT(5) +# define MCP25XXFD_CAN_FIFOSTA_TXLARB BIT(6) +# define MCP25XXFD_CAN_FIFOSTA_TXABT BIT(7) +# define MCP25XXFD_CAN_FIFOSTA_FIFOCI_BITS 5 +# define MCP25XXFD_CAN_FIFOSTA_FIFOCI_SHIFT 8 +# define MCP25XXFD_CAN_FIFOSTA_FIFOCI_MASK \ + GENMASK(MCP25XXFD_CAN_FIFOSTA_FIFOCI_SHIFT + \ + MCP25XXFD_CAN_FIFOSTA_FIFOCI_BITS - 1, \ + MCP25XXFD_CAN_FIFOSTA_FIFOCI_SHIFT) +#define MCP25XXFD_CAN_FIFOUA(x) \ + MCP25XXFD_CAN_SFR_BASE(0x64 + 12 * ((x) - 1)) +#define MCP25XXFD_CAN_FLTCON(x) \ + MCP25XXFD_CAN_SFR_BASE(0x1D0 + ((x) & 0x1c)) +# define MCP25XXFD_CAN_FILCON_SHIFT(x) (((x) & 3) * 8) +# define MCP25XXFD_CAN_FILCON_BITS(x) MCP25XXFD_CAN_FILCON_BITS_ +# define MCP25XXFD_CAN_FILCON_BITS_ 4 + /* avoid macro reuse warning, so do not use GENMASK as above */ +# define MCP25XXFD_CAN_FILCON_MASK(x) \ + (GENMASK(MCP25XXFD_CAN_FILCON_BITS_ - 1, 0) << \ + MCP25XXFD_CAN_FILCON_SHIFT(x)) +# define MCP25XXFD_CAN_FIFOCON_FLTEN(x) \ + BIT(7 + MCP25XXFD_CAN_FILCON_SHIFT(x)) +#define MCP25XXFD_CAN_FLTOBJ(x) \ + MCP25XXFD_CAN_SFR_BASE(0x1F0 + 8 * (x)) +# define MCP25XXFD_CAN_FILOBJ_SID_BITS 11 +# define MCP25XXFD_CAN_FILOBJ_SID_SHIFT 0 +# define MCP25XXFD_CAN_FILOBJ_SID_MASK \ + GENMASK(MCP25XXFD_CAN_FILOBJ_SID_SHIFT + \ + MCP25XXFD_CAN_FILOBJ_SID_BITS - 1, \ + MCP25XXFD_CAN_FILOBJ_SID_SHIFT) +# define MCP25XXFD_CAN_FILOBJ_EID_BITS 18 +# define MCP25XXFD_CAN_FILOBJ_EID_SHIFT 12 +# define MCP25XXFD_CAN_FILOBJ_EID_MASK \ + GENMASK(MCP25XXFD_CAN_FILOBJ_EID_SHIFT + \ + MCP25XXFD_CAN_FILOBJ_EID_BITS - 1, \ + MCP25XXFD_CAN_FILOBJ_EID_SHIFT) +# define MCP25XXFD_CAN_FILOBJ_SID11 BIT(29) +# define MCP25XXFD_CAN_FILOBJ_EXIDE BIT(30) +#define MCP25XXFD_CAN_FLTMASK(x) \ + MCP25XXFD_CAN_SFR_BASE(0x1F4 + 8 * (x)) +# define MCP25XXFD_CAN_FILMASK_MSID_BITS 11 +# define MCP25XXFD_CAN_FILMASK_MSID_SHIFT 0 +# define MCP25XXFD_CAN_FILMASK_MSID_MASK \ + GENMASK(MCP25XXFD_CAN_FILMASK_MSID_SHIFT + \ + MCP25XXFD_CAN_FILMASK_MSID_BITS - 1, \ + MCP25XXFD_CAN_FILMASK_MSID_SHIFT) +# define MCP25XXFD_CAN_FILMASK_MEID_BITS 18 +# define MCP25XXFD_CAN_FILMASK_MEID_SHIFT 12 +# define MCP25XXFD_CAN_FILMASK_MEID_MASK \ + GENMASK(MCP25XXFD_CAN_FILMASK_MEID_SHIFT + \ + MCP25XXFD_CAN_FILMASK_MEID_BITS - 1, \ + MCP25XXFD_CAN_FILMASK_MEID_SHIFT) +# define MCP25XXFD_CAN_FILMASK_MSID11 BIT(29) +# define MCP25XXFD_CAN_FILMASK_MIDE BIT(30) + +/* the FIFO Objects in SRAM */ +#define MCP25XXFD_SRAM_SIZE 2048 +#define MCP25XXFD_SRAM_ADDR(x) (0x400 + (x)) + +/* memory structure in sram for tx fifos */ +struct mcp25xxfd_can_obj_tx { + u32 id; + u32 flags; + u8 data[]; +}; + +/* memory structure in sram for rx fifos */ +struct mcp25xxfd_can_obj_rx { + u32 id; + u32 flags; + u32 ts; + u8 data[]; +}; + +/* memory structure in sram for tef fifos */ +struct mcp25xxfd_can_obj_tef { + u32 id; + u32 flags; + u32 ts; +}; + +#define MCP25XXFD_CAN_OBJ_ID_SID_BITS 11 +#define MCP25XXFD_CAN_OBJ_ID_SID_SHIFT 0 +#define MCP25XXFD_CAN_OBJ_ID_SID_MASK \ + GENMASK(MCP25XXFD_CAN_OBJ_ID_SID_SHIFT + \ + MCP25XXFD_CAN_OBJ_ID_SID_BITS - 1, \ + MCP25XXFD_CAN_OBJ_ID_SID_SHIFT) +#define MCP25XXFD_CAN_OBJ_ID_EID_BITS 18 +#define MCP25XXFD_CAN_OBJ_ID_EID_SHIFT 11 +#define MCP25XXFD_CAN_OBJ_ID_EID_MASK \ + GENMASK(MCP25XXFD_CAN_OBJ_ID_EID_SHIFT + \ + MCP25XXFD_CAN_OBJ_ID_EID_BITS - 1, \ + MCP25XXFD_CAN_OBJ_ID_EID_SHIFT) +#define MCP25XXFD_CAN_OBJ_ID_SID_BIT11 BIT(29) + +#define MCP25XXFD_CAN_OBJ_FLAGS_DLC_BITS 4 +#define MCP25XXFD_CAN_OBJ_FLAGS_DLC_SHIFT 0 +#define MCP25XXFD_CAN_OBJ_FLAGS_DLC_MASK \ + GENMASK(MCP25XXFD_CAN_OBJ_FLAGS_DLC_SHIFT + \ + MCP25XXFD_CAN_OBJ_FLAGS_DLC_BITS - 1, \ + MCP25XXFD_CAN_OBJ_FLAGS_DLC_SHIFT) +#define MCP25XXFD_CAN_OBJ_FLAGS_IDE BIT(4) +#define MCP25XXFD_CAN_OBJ_FLAGS_RTR BIT(5) +#define MCP25XXFD_CAN_OBJ_FLAGS_BRS BIT(6) +#define MCP25XXFD_CAN_OBJ_FLAGS_FDF BIT(7) +#define MCP25XXFD_CAN_OBJ_FLAGS_ESI BIT(8) +#define MCP25XXFD_CAN_OBJ_FLAGS_SEQ_BITS 7 +#define MCP25XXFD_CAN_OBJ_FLAGS_SEQ_SHIFT 9 +#define MCP25XXFD_CAN_OBJ_FLAGS_SEQ_MASK \ + GENMASK(MCP25XXFD_CAN_OBJ_FLAGS_SEQ_SHIFT + \ + MCP25XXFD_CAN_OBJ_FLAGS_SEQ_BITS - 1, \ + MCP25XXFD_CAN_OBJ_FLAGS_SEQ_SHIFT) +#define MCP25XXFD_CAN_OBJ_FLAGS_FILHIT_BITS 11 +#define MCP25XXFD_CAN_OBJ_FLAGS_FILHIT_SHIFT 5 +#define MCP25XXFD_CAN_OBJ_FLAGS_FILHIT_MASK \ + GENMASK(MCP25XXFD_CAN_FLAGS_FILHIT_SHIFT + \ + MCP25XXFD_CAN_FLAGS_FILHIT_BITS - 1, \ + MCP25XXFD_CAN_FLAGS_FILHIT_SHIFT) + +#endif /* __MCP25XXFD_REGS_H */ -- 2.11.0
