Re: pull-request: can-next 2018-11-28,pull-request: can-next 2018-11-28

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/28/18 8:21 PM, David Miller wrote:
> From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
> Date: Wed, 28 Nov 2018 17:01:13 +0100
> 
>>   ssh://git@xxxxxxxxxxxxxxxxxxx/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-4.21-20181128
> 
> This doesn't work for me at all.
> 
> I'm not adding a custom .ssh config entry to point gitolite.kernel.org
> to the same SSH key that I use for gitolite@xxxxxxxxxxxxx, no way.
> 
> I don't want to see these SSH based URLs any more, they are a pain and
> add overhead to my workflow.

Ok, I've adjusted my scripts.

> Please just use plain git:// URLs, thank you.

Done, here's the pull request with the git:// URL:

---

This is a pull request for net-next/master consisting of 18 patches.

The first patch is by Colin Ian King and fixes the spelling in the ucan
driver.

The next three patches target the xilinx driver. YueHaibing's patch
fixes the return type of ndo_start_xmit function. Two patches by
Shubhrajyoti Datta add support for the CAN FD 2.0 controllers.

Flavio Suligoi's patch for the sja1000 driver add support for the ASEM
CAN raw hardware.

Wolfram Sang's and Kuninori Morimoto's patches switch the rcar driver to
use SPDX license identifiers.

The remaining 111 patches improve the flexcan driver. Pankaj Bansal's
patch enables the driver in Kconfig on all architectures with IOMEM
support. The next four patches by me fix indention, add missing
parentheses and comments. Aisheng Dong's patches add self wake support
and document it in the DT bindings. The remaining patches by Pankaj
Bansal first fix the loopback support and prepare the driver for the
CAN-FD support needed for the LX2160A SoC. The actual CAN-FD support
will be added in a later patch series.

regards,
Marc

---

The following changes since commit 86d1d8b72caf648e5b14ac274f9afeaab58bbae1:

  net/ipv4: Fix missing raw_init when CONFIG_PROC_FS is disabled (2018-11-27 20:58:02 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-4.21-20181128

for you to fetch changes up to 6cbf76028dcac01129211828d62314285231f79e:

  can: flexcan: split the Message Buffer RAM area (2018-11-28 16:52:25 +0100)

----------------------------------------------------------------
linux-can-next-for-4.21-20181128

----------------------------------------------------------------
Aisheng Dong (2):
      dt-bindings: can: flexcan: add stop mode property to device tree
      can: flexcan: add self wakeup support

Colin Ian King (1):
      can: ucan: fix spelling mistake: "resumbmitting" -> "resubmitting"

Flavio Suligoi (1):
      can: sja1000: plx_pci: add support for ASEM CAN raw device

Kuninori Morimoto (1):
      can: rcar: add SPDX identifiers to Kconfig and Makefile

Marc Kleine-Budde (4):
      can: flexcan: flexcan_start_xmit(): fix indention
      can: flexcan: flexcan_irq(): fix indention
      can: flexcan: FLEXCAN_IFLAG_MB: add () around macro argument
      can: flexcan: flexcan_chip_start(): adjust comment to match the code

Pankaj Bansal (5):
      can: flexcan: enable flexcan for all architectures
      can: flexcan: flexcan_chip_start(): enable loopback mode in flexcan
      can: flexcan: move rx_offload_add() from flexcan_probe() to flexcan_open()
      can: flexcan: Add provision for variable payload size
      can: flexcan: split the Message Buffer RAM area

Shubhrajyoti Datta (2):
      dt-bindings: can: xilinx_can: add Xilinx CAN FD 2.0 bindings
      can: xilinx: add can 2.0 support

Wolfram Sang (1):
      can: rcar: use SPDX identifier for Renesas drivers

YueHaibing (1):
      can: xilinx: fix return type of ndo_start_xmit function

 .../devicetree/bindings/net/can/fsl-flexcan.txt    |   8 +
 .../devicetree/bindings/net/can/xilinx_can.txt     |   1 +
 drivers/net/can/Kconfig                            |   2 +-
 drivers/net/can/flexcan.c                          | 365 ++++++++++++++++-----
 drivers/net/can/rcar/Kconfig                       |   1 +
 drivers/net/can/rcar/Makefile                      |   1 +
 drivers/net/can/rcar/rcar_can.c                    |   6 +-
 drivers/net/can/rcar/rcar_canfd.c                  |   6 +-
 drivers/net/can/sja1000/Kconfig                    |   1 +
 drivers/net/can/sja1000/plx_pci.c                  |  65 +++-
 drivers/net/can/usb/ucan.c                         |   2 +-
 drivers/net/can/xilinx_can.c                       |  36 +-
 12 files changed, 402 insertions(+), 92 deletions(-)

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux