Hello David,
this is a pull request for net-next/master consisting of 18 patches.
The first patch is by Colin Ian King and fixes the spelling in the ucan
driver.
The next three patches target the xilinx driver. YueHaibing's patch
fixes the return type of ndo_start_xmit function. Two patches by
Shubhrajyoti Datta add support for the CAN FD 2.0 controllers.
Flavio Suligoi's patch for the sja1000 driver add support for the ASEM
CAN raw hardware.
Wolfram Sang's and Kuninori Morimoto's patches switch the rcar driver to
use SPDX license identifiers.
The remaining 111 patches improve the flexcan driver. Pankaj Bansal's
patch enables the driver in Kconfig on all architectures with IOMEM
support. The next four patches by me fix indention, add missing
parentheses and comments. Aisheng Dong's patches add self wake support
and document it in the DT bindings. The remaining patches by Pankaj
Bansal first fix the loopback support and prepare the driver for the
CAN-FD support needed for the LX2160A SoC. The actual CAN-FD support
will be added in a later patch series.
regards,
Marc
---
The following changes since commit 86d1d8b72caf648e5b14ac274f9afeaab58bbae1:
net/ipv4: Fix missing raw_init when CONFIG_PROC_FS is disabled (2018-11-27 20:58:02 -0800)
are available in the Git repository at:
ssh://git@xxxxxxxxxxxxxxxxxxx/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-4.21-20181128
for you to fetch changes up to 6cbf76028dcac01129211828d62314285231f79e:
can: flexcan: split the Message Buffer RAM area (2018-11-28 16:52:25 +0100)
----------------------------------------------------------------
linux-can-next-for-4.21-20181128
----------------------------------------------------------------
Aisheng Dong (2):
dt-bindings: can: flexcan: add stop mode property to device tree
can: flexcan: add self wakeup support
Colin Ian King (1):
can: ucan: fix spelling mistake: "resumbmitting" -> "resubmitting"
Flavio Suligoi (1):
can: sja1000: plx_pci: add support for ASEM CAN raw device
Kuninori Morimoto (1):
can: rcar: add SPDX identifiers to Kconfig and Makefile
Marc Kleine-Budde (4):
can: flexcan: flexcan_start_xmit(): fix indention
can: flexcan: flexcan_irq(): fix indention
can: flexcan: FLEXCAN_IFLAG_MB: add () around macro argument
can: flexcan: flexcan_chip_start(): adjust comment to match the code
Pankaj Bansal (5):
can: flexcan: enable flexcan for all architectures
can: flexcan: flexcan_chip_start(): enable loopback mode in flexcan
can: flexcan: move rx_offload_add() from flexcan_probe() to flexcan_open()
can: flexcan: Add provision for variable payload size
can: flexcan: split the Message Buffer RAM area
Shubhrajyoti Datta (2):
dt-bindings: can: xilinx_can: add Xilinx CAN FD 2.0 bindings
can: xilinx: add can 2.0 support
Wolfram Sang (1):
can: rcar: use SPDX identifier for Renesas drivers
YueHaibing (1):
can: xilinx: fix return type of ndo_start_xmit function
.../devicetree/bindings/net/can/fsl-flexcan.txt | 8 +
.../devicetree/bindings/net/can/xilinx_can.txt | 1 +
drivers/net/can/Kconfig | 2 +-
drivers/net/can/flexcan.c | 365 ++++++++++++++++-----
drivers/net/can/rcar/Kconfig | 1 +
drivers/net/can/rcar/Makefile | 1 +
drivers/net/can/rcar/rcar_can.c | 6 +-
drivers/net/can/rcar/rcar_canfd.c | 6 +-
drivers/net/can/sja1000/Kconfig | 1 +
drivers/net/can/sja1000/plx_pci.c | 65 +++-
drivers/net/can/usb/ucan.c | 2 +-
drivers/net/can/xilinx_can.c | 36 +-
12 files changed, 402 insertions(+), 92 deletions(-)
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |-
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Attachment:
signature.asc
Description: OpenPGP digital signature
