[Bluez PATCH] adapter: Reset pending settings when receiving MGMT error

[Archie Pusaka <apusaka@xxxxxxxxxx>]

From: Archie Pusaka <apusaka@xxxxxxxxxxxx>

We set the pending settings flag when sending MGMT_SETTING_*
commands to the MGMT layer and clear them when receiving success
reply, but we don't clear them when receiving error reply. This
might cause a setting to be stuck in pending state.

Therefore, also clear the pending flag when receiving error.
Furthermore, this patch also postpone setting the pending flag
until we queue the MGMT command in order to avoid setting it too
soon but we return early.

Reviewed-by: Sonny Sasaka <sonnysasaka@xxxxxxxxxxxx>

---

 src/adapter.c | 45 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 8 deletions(-)

diff --git a/src/adapter.c b/src/adapter.c
index ec26aab1a7..4da1fcc3e5 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -640,14 +640,21 @@ static void new_settings_callback(uint16_t index, uint16_t length,
 	settings_changed(adapter, settings);
 }
 
+struct set_mode_data {
+	struct btd_adapter *adapter;
+	uint32_t setting;
+};
+
 static void set_mode_complete(uint8_t status, uint16_t length,
 					const void *param, void *user_data)
 {
-	struct btd_adapter *adapter = user_data;
+	struct set_mode_data *data = user_data;
+	struct btd_adapter *adapter = data->adapter;
 
 	if (status != MGMT_STATUS_SUCCESS) {
 		btd_error(adapter->dev_id, "Failed to set mode: %s (0x%02x)",
 						mgmt_errstr(status), status);
+		adapter->pending_settings &= ~data->setting;
 		return;
 	}
 
@@ -677,6 +684,7 @@ static bool set_mode(struct btd_adapter *adapter, uint16_t opcode,
 {
 	struct mgmt_mode cp;
 	uint32_t setting = 0;
+	struct set_mode_data *data;
 
 	memset(&cp, 0, sizeof(cp));
 	cp.val = mode;
@@ -699,15 +707,23 @@ static bool set_mode(struct btd_adapter *adapter, uint16_t opcode,
 		break;
 	}
 
-	adapter->pending_settings |= setting;
-
 	DBG("sending set mode command for index %u", adapter->dev_id);
 
+	data = g_try_new0(struct set_mode_data, 1);
+	if (!data)
+		goto failed;
+
+	data->adapter = adapter;
+	data->setting = setting;
+
 	if (mgmt_send(adapter->mgmt, opcode,
 				adapter->dev_id, sizeof(cp), &cp,
-				set_mode_complete, adapter, NULL) > 0)
+				set_mode_complete, data, g_free) > 0) {
+		adapter->pending_settings |= setting;
 		return true;
+	}
 
+failed:
 	btd_error(adapter->dev_id, "Failed to set mode for index %u",
 							adapter->dev_id);
 
@@ -718,6 +734,7 @@ static bool set_discoverable(struct btd_adapter *adapter, uint8_t mode,
 							uint16_t timeout)
 {
 	struct mgmt_cp_set_discoverable cp;
+	struct set_mode_data *data;
 
 	memset(&cp, 0, sizeof(cp));
 	cp.val = mode;
@@ -734,11 +751,19 @@ static bool set_discoverable(struct btd_adapter *adapter, uint8_t mode,
 									mode);
 	}
 
+	data = g_try_new0(struct set_mode_data, 1);
+	if (!data)
+		goto failed;
+
+	data->adapter = adapter;
+	data->setting = 0;
+
 	if (mgmt_send(adapter->mgmt, MGMT_OP_SET_DISCOVERABLE,
 				adapter->dev_id, sizeof(cp), &cp,
-				set_mode_complete, adapter, NULL) > 0)
+				set_mode_complete, data, g_free) > 0)
 		return true;
 
+failed:
 	btd_error(adapter->dev_id, "Failed to set mode for index %u",
 							adapter->dev_id);
 
@@ -2877,6 +2902,7 @@ static gboolean property_get_mode(struct btd_adapter *adapter,
 
 struct property_set_data {
 	struct btd_adapter *adapter;
+	uint32_t setting;
 	GDBusPendingPropertySet id;
 };
 
@@ -2901,6 +2927,8 @@ static void property_set_mode_complete(uint8_t status, uint16_t length,
 
 		g_dbus_pending_property_error(data->id, dbus_err,
 							mgmt_errstr(status));
+
+		adapter->pending_settings &= ~data->setting;
 		return;
 	}
 
@@ -2969,8 +2997,6 @@ static void property_set_mode(struct btd_adapter *adapter, uint32_t setting,
 
 	mode = (enable == TRUE) ? 0x01 : 0x00;
 
-	adapter->pending_settings |= setting;
-
 	switch (setting) {
 	case MGMT_SETTING_POWERED:
 		opcode = MGMT_OP_SET_POWERED;
@@ -3024,11 +3050,14 @@ static void property_set_mode(struct btd_adapter *adapter, uint32_t setting,
 		goto failed;
 
 	data->adapter = adapter;
+	data->setting = setting;
 	data->id = id;
 
 	if (mgmt_send(adapter->mgmt, opcode, adapter->dev_id, len, param,
-			property_set_mode_complete, data, g_free) > 0)
+			property_set_mode_complete, data, g_free) > 0) {
+		adapter->pending_settings |= setting;
 		return;
+	}
 
 	g_free(data);
 
-- 
2.37.1.595.g718a3a8f04-goog