Hi Luiz,
I don't think we have tested the second patch yet.
Hi Abhishek,
Do you have context on this?
On Thu, 14 Jan 2021 at 11:57, Luiz Augusto von Dentz
<luiz.dentz@xxxxxxxxx> wrote:
>
> From: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
>
> This makes btusb to queue ACL and events during a polling interval
> by using of a delayed work, with the interval working as a time window
> where frames received from different endpoints are considered to be
> arrived at same time and then attempt to resolve potential conflics by
> processing the events ahead of ACL packets.
>
> It worth noting though that priorizing events over ACL data may result
> in inverting the order compared to how they appeared over the air, for
> instance there may be packets received before a disconnect event that
> will be discarded and unencrypted packets received before encryption
> change which would considered encrypted, because of these potential
> changes on the order the support for queuing during the polling
> interval is not enabled by default so platforms have the following
> means to enable it:
>
> At build-time:
>
> CONFIG_BT_HCIBTUSB_INTERVAL=y
>
> At runtime with use of module option:
>
> enable_interval
>
> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
Tested-by: Archie Pusaka <apusaka@xxxxxxxxxxxx>
> ---
> drivers/bluetooth/Kconfig | 7 ++++
> drivers/bluetooth/btusb.c | 88 ++++++++++++++++++++++++++++++++++-----
> 2 files changed, 84 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
> index 4e73a531b377..2f20a853d946 100644
> --- a/drivers/bluetooth/Kconfig
> +++ b/drivers/bluetooth/Kconfig
> @@ -41,6 +41,13 @@ config BT_HCIBTUSB_AUTOSUSPEND
> This can be overridden by passing btusb.enable_autosuspend=[y|n]
> on the kernel commandline.
>
> +config BT_HCIBTUSB_INTERVAL
> + bool "Enable notification of USB polling interval"
> + depends on BT_HCIBTUSB
> + help
> + Say Y here to enable notification of USB polling interval for
> + Bluetooth USB devices by default.
> +
> config BT_HCIBTUSB_BCM
> bool "Broadcom protocol support"
> depends on BT_HCIBTUSB
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index b14102fba601..38cb5448fc69 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -30,7 +30,7 @@
> static bool disable_scofix;
> static bool force_scofix;
> static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND);
> -
> +static bool enable_interval = IS_ENABLED(CONFIG_BT_HCIBTUSB_INTERVAL);
> static bool reset = true;
>
> static struct usb_driver btusb_driver;
> @@ -519,8 +519,12 @@ struct btusb_data {
>
> unsigned long flags;
>
> - struct work_struct work;
> - struct work_struct waker;
> + struct work_struct work;
> + struct work_struct waker;
> + struct delayed_work rx_work;
> +
> + struct sk_buff_head acl_q;
> + struct sk_buff_head evt_q;
>
> struct usb_anchor deferred;
> struct usb_anchor tx_anchor;
> @@ -557,7 +561,7 @@ struct btusb_data {
> int isoc_altsetting;
> int suspend_count;
>
> - int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
> + int (*recv_event)(struct btusb_data *data, struct sk_buff *skb);
> int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
>
> int (*setup_on_usb)(struct hci_dev *hdev);
> @@ -707,7 +711,7 @@ static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
>
> if (!hci_skb_expect(skb)) {
> /* Complete frame */
> - data->recv_event(data->hdev, skb);
> + data->recv_event(data, skb);
> skb = NULL;
> }
> }
> @@ -718,6 +722,25 @@ static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
> return err;
> }
>
> +static int btusb_rx_queue(struct btusb_data *data, struct sk_buff *skb,
> + struct sk_buff_head *queue, unsigned int interval)
> +{
> + skb_queue_tail(queue, skb);
> +
> + schedule_delayed_work(&data->rx_work, interval);
> +
> + return 0;
> +}
> +
> +static int btusb_recv_acl(struct btusb_data *data, struct sk_buff *skb)
> +{
> + if (!enable_interval)
> + return hci_recv_frame(data->hdev, skb);
> +
> + /* TODO: Calculate polling interval based on endpoint bInterval? */
> + return btusb_rx_queue(data, skb, &data->acl_q, msecs_to_jiffies(1));
> +}
> +
> static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
> {
> struct sk_buff *skb;
> @@ -765,7 +788,7 @@ static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
>
> if (!hci_skb_expect(skb)) {
> /* Complete frame */
> - hci_recv_frame(data->hdev, skb);
> + btusb_recv_acl(data, skb);
> skb = NULL;
> }
> }
> @@ -1383,9 +1406,13 @@ static int btusb_close(struct hci_dev *hdev)
>
> BT_DBG("%s", hdev->name);
>
> + cancel_delayed_work(&data->rx_work);
> cancel_work_sync(&data->work);
> cancel_work_sync(&data->waker);
>
> + skb_queue_purge(&data->acl_q);
> + skb_queue_purge(&data->evt_q);
> +
> clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
> clear_bit(BTUSB_BULK_RUNNING, &data->flags);
> clear_bit(BTUSB_INTR_RUNNING, &data->flags);
> @@ -1417,6 +1444,11 @@ static int btusb_flush(struct hci_dev *hdev)
>
> BT_DBG("%s", hdev->name);
>
> + cancel_delayed_work(&data->rx_work);
> +
> + skb_queue_purge(&data->acl_q);
> + skb_queue_purge(&data->evt_q);
> +
> usb_kill_anchored_urbs(&data->tx_anchor);
> btusb_free_frags(data);
>
> @@ -1769,6 +1801,25 @@ static void btusb_waker(struct work_struct *work)
> usb_autopm_put_interface(data->intf);
> }
>
> +static void btusb_rx_dequeue(struct btusb_data *data,
> + struct sk_buff_head *queue)
> +{
> + struct sk_buff *skb;
> +
> + while ((skb = skb_dequeue(queue)))
> + hci_recv_frame(data->hdev, skb);
> +}
> +
> +static void btusb_rx_work(struct work_struct *work)
> +{
> + struct btusb_data *data = container_of(work, struct btusb_data,
> + rx_work.work);
> +
> + /* Process HCI event packets so states changes are synchronized first */
> + btusb_rx_dequeue(data, &data->evt_q);
> + btusb_rx_dequeue(data, &data->acl_q);
> +}
> +
> static int btusb_setup_bcm92035(struct hci_dev *hdev)
> {
> struct sk_buff *skb;
> @@ -2304,10 +2355,8 @@ static void btusb_intel_secure_send_result(struct btusb_data *data,
> wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
> }
>
> -static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
> +static int btusb_recv_event_intel(struct btusb_data *data, struct sk_buff *skb)
> {
> - struct btusb_data *data = hci_get_drvdata(hdev);
> -
> if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
> struct hci_event_hdr *hdr = (void *)skb->data;
>
> @@ -2336,7 +2385,7 @@ static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
> }
> }
>
> - return hci_recv_frame(hdev, skb);
> + return hci_recv_frame(data->hdev, skb);
> }
>
> static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
> @@ -4279,6 +4328,15 @@ static int btusb_shutdown_qca(struct hci_dev *hdev)
> return 0;
> }
>
> +static int btusb_recv_evt(struct btusb_data *data, struct sk_buff *skb)
> +{
> + if (!enable_interval)
> + return hci_recv_frame(data->hdev, skb);
> +
> + /* Don't delay event processing */
> + return btusb_rx_queue(data, skb, &data->evt_q, 0);
> +}
> +
> static int btusb_probe(struct usb_interface *intf,
> const struct usb_device_id *id)
> {
> @@ -4362,6 +4420,11 @@ static int btusb_probe(struct usb_interface *intf,
>
> INIT_WORK(&data->work, btusb_work);
> INIT_WORK(&data->waker, btusb_waker);
> + INIT_DELAYED_WORK(&data->rx_work, btusb_rx_work);
> +
> + skb_queue_head_init(&data->acl_q);
> + skb_queue_head_init(&data->evt_q);
> +
> init_usb_anchor(&data->deferred);
> init_usb_anchor(&data->tx_anchor);
> spin_lock_init(&data->txlock);
> @@ -4378,7 +4441,7 @@ static int btusb_probe(struct usb_interface *intf,
> data->recv_bulk = btusb_recv_bulk_intel;
> set_bit(BTUSB_BOOTLOADER, &data->flags);
> } else {
> - data->recv_event = hci_recv_frame;
> + data->recv_event = btusb_recv_evt;
> data->recv_bulk = btusb_recv_bulk;
> }
>
> @@ -4867,6 +4930,9 @@ MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
> module_param(enable_autosuspend, bool, 0644);
> MODULE_PARM_DESC(enable_autosuspend, "Enable USB autosuspend by default");
>
> +module_param(enable_interval, bool, 0644);
> +MODULE_PARM_DESC(enable_interval, "Enable USB polling interval by default");
> +
> module_param(reset, bool, 0644);
> MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
>
> --
> 2.26.2
>
Thanks,
Archie
