Hi Luiz, Yes, we have that enabled: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/2312117/3 Abhishek On Wed, Jan 13, 2021 at 3:53 PM Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx> wrote: > > Hi, > > On Wed, Jan 13, 2021 at 3:51 PM Luiz Augusto von Dentz > <luiz.dentz@xxxxxxxxx> wrote: > > > > Hi Abhishek, > > > > On Wed, Jan 13, 2021 at 3:48 PM Abhishek Pandit-Subedi > > <abhishekpandit@xxxxxxxxxxxx> wrote: > > > > > > + Archie, Alain > > > > > > It looks like we already landed this change into Chrome a while ago > > > and we haven't had any issues. > > > https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/2312116 > > > > Good to know, but can you also confirm it is running with > > CONFIG_BT_HCIBTUSB_INTERVAL=y? > > Correction, CONFIG_BT_HCIBTUSB_INTERVAL=y or passing enable_interval to btusb. > > > > Archie, can you confirm that this is the case? > > > > > > Thanks > > > Abhishek > > > > > > On Wed, Jan 13, 2021 at 3:33 PM Luiz Augusto von Dentz > > > <luiz.dentz@xxxxxxxxx> wrote: > > > > > > > > Hi Abhishek, > > > > > > > > On Wed, Jan 13, 2021 at 3:28 PM Luiz Augusto von Dentz > > > > <luiz.dentz@xxxxxxxxx> wrote: > > > > > > > > > > From: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> > > > > > > > > > > This makes btusb to queue ACL and events during a polling interval > > > > > by using of a delayed work, with the interval working as a time window > > > > > where frames received from different endpoints are considered to be > > > > > arrived at same time and then attempt to resolve potential conflics by > > > > > processing the events ahead of ACL packets. > > > > > > > > > > It worth noting though that priorizing events over ACL data may result > > > > > in inverting the order compared to how they appeared over the air, for > > > > > instance there may be packets received before a disconnect event that > > > > > will be discarded and unencrypted packets received before encryption > > > > > change which would considered encrypted, because of these potential > > > > > changes on the order the support for queuing during the polling > > > > > interval is not enabled by default so platforms have the following > > > > > means to enable it: > > > > > > > > > > At build-time: > > > > > > > > > > CONFIG_BT_HCIBTUSB_INTERVAL=y > > > > > > > > > > At runtime with use of module option: > > > > > > > > > > enable_interval > > > > > > > > > > Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> > > > > > --- > > > > > drivers/bluetooth/Kconfig | 7 ++++ > > > > > drivers/bluetooth/btusb.c | 88 ++++++++++++++++++++++++++++++++++----- > > > > > 2 files changed, 84 insertions(+), 11 deletions(-) > > > > > > > > > > diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig > > > > > index 4e73a531b377..2f20a853d946 100644 > > > > > --- a/drivers/bluetooth/Kconfig > > > > > +++ b/drivers/bluetooth/Kconfig > > > > > @@ -41,6 +41,13 @@ config BT_HCIBTUSB_AUTOSUSPEND > > > > > This can be overridden by passing btusb.enable_autosuspend=[y|n] > > > > > on the kernel commandline. > > > > > > > > > > +config BT_HCIBTUSB_INTERVAL > > > > > + bool "Enable notification of USB polling interval" > > > > > + depends on BT_HCIBTUSB > > > > > + help > > > > > + Say Y here to enable notification of USB polling interval for > > > > > + Bluetooth USB devices by default. > > > > > + > > > > > config BT_HCIBTUSB_BCM > > > > > bool "Broadcom protocol support" > > > > > depends on BT_HCIBTUSB > > > > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > > > > > index b14102fba601..38cb5448fc69 100644 > > > > > --- a/drivers/bluetooth/btusb.c > > > > > +++ b/drivers/bluetooth/btusb.c > > > > > @@ -30,7 +30,7 @@ > > > > > static bool disable_scofix; > > > > > static bool force_scofix; > > > > > static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND); > > > > > - > > > > > +static bool enable_interval = IS_ENABLED(CONFIG_BT_HCIBTUSB_INTERVAL); > > > > > static bool reset = true; > > > > > > > > > > static struct usb_driver btusb_driver; > > > > > @@ -519,8 +519,12 @@ struct btusb_data { > > > > > > > > > > unsigned long flags; > > > > > > > > > > - struct work_struct work; > > > > > - struct work_struct waker; > > > > > + struct work_struct work; > > > > > + struct work_struct waker; > > > > > + struct delayed_work rx_work; > > > > > + > > > > > + struct sk_buff_head acl_q; > > > > > + struct sk_buff_head evt_q; > > > > > > > > > > struct usb_anchor deferred; > > > > > struct usb_anchor tx_anchor; > > > > > @@ -557,7 +561,7 @@ struct btusb_data { > > > > > int isoc_altsetting; > > > > > int suspend_count; > > > > > > > > > > - int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb); > > > > > + int (*recv_event)(struct btusb_data *data, struct sk_buff *skb); > > > > > int (*recv_bulk)(struct btusb_data *data, void *buffer, int count); > > > > > > > > > > int (*setup_on_usb)(struct hci_dev *hdev); > > > > > @@ -707,7 +711,7 @@ static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count) > > > > > > > > > > if (!hci_skb_expect(skb)) { > > > > > /* Complete frame */ > > > > > - data->recv_event(data->hdev, skb); > > > > > + data->recv_event(data, skb); > > > > > skb = NULL; > > > > > } > > > > > } > > > > > @@ -718,6 +722,25 @@ static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count) > > > > > return err; > > > > > } > > > > > > > > > > +static int btusb_rx_queue(struct btusb_data *data, struct sk_buff *skb, > > > > > + struct sk_buff_head *queue, unsigned int interval) > > > > > +{ > > > > > + skb_queue_tail(queue, skb); > > > > > + > > > > > + schedule_delayed_work(&data->rx_work, interval); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static int btusb_recv_acl(struct btusb_data *data, struct sk_buff *skb) > > > > > +{ > > > > > + if (!enable_interval) > > > > > + return hci_recv_frame(data->hdev, skb); > > > > > + > > > > > + /* TODO: Calculate polling interval based on endpoint bInterval? */ > > > > > + return btusb_rx_queue(data, skb, &data->acl_q, msecs_to_jiffies(1)); > > > > > +} > > > > > + > > > > > static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count) > > > > > { > > > > > struct sk_buff *skb; > > > > > @@ -765,7 +788,7 @@ static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count) > > > > > > > > > > if (!hci_skb_expect(skb)) { > > > > > /* Complete frame */ > > > > > - hci_recv_frame(data->hdev, skb); > > > > > + btusb_recv_acl(data, skb); > > > > > skb = NULL; > > > > > } > > > > > } > > > > > @@ -1383,9 +1406,13 @@ static int btusb_close(struct hci_dev *hdev) > > > > > > > > > > BT_DBG("%s", hdev->name); > > > > > > > > > > + cancel_delayed_work(&data->rx_work); > > > > > cancel_work_sync(&data->work); > > > > > cancel_work_sync(&data->waker); > > > > > > > > > > + skb_queue_purge(&data->acl_q); > > > > > + skb_queue_purge(&data->evt_q); > > > > > + > > > > > clear_bit(BTUSB_ISOC_RUNNING, &data->flags); > > > > > clear_bit(BTUSB_BULK_RUNNING, &data->flags); > > > > > clear_bit(BTUSB_INTR_RUNNING, &data->flags); > > > > > @@ -1417,6 +1444,11 @@ static int btusb_flush(struct hci_dev *hdev) > > > > > > > > > > BT_DBG("%s", hdev->name); > > > > > > > > > > + cancel_delayed_work(&data->rx_work); > > > > > + > > > > > + skb_queue_purge(&data->acl_q); > > > > > + skb_queue_purge(&data->evt_q); > > > > > + > > > > > usb_kill_anchored_urbs(&data->tx_anchor); > > > > > btusb_free_frags(data); > > > > > > > > > > @@ -1769,6 +1801,25 @@ static void btusb_waker(struct work_struct *work) > > > > > usb_autopm_put_interface(data->intf); > > > > > } > > > > > > > > > > +static void btusb_rx_dequeue(struct btusb_data *data, > > > > > + struct sk_buff_head *queue) > > > > > +{ > > > > > + struct sk_buff *skb; > > > > > + > > > > > + while ((skb = skb_dequeue(queue))) > > > > > + hci_recv_frame(data->hdev, skb); > > > > > +} > > > > > + > > > > > +static void btusb_rx_work(struct work_struct *work) > > > > > +{ > > > > > + struct btusb_data *data = container_of(work, struct btusb_data, > > > > > + rx_work.work); > > > > > + > > > > > + /* Process HCI event packets so states changes are synchronized first */ > > > > > + btusb_rx_dequeue(data, &data->evt_q); > > > > > + btusb_rx_dequeue(data, &data->acl_q); > > > > > +} > > > > > + > > > > > static int btusb_setup_bcm92035(struct hci_dev *hdev) > > > > > { > > > > > struct sk_buff *skb; > > > > > @@ -2304,10 +2355,8 @@ static void btusb_intel_secure_send_result(struct btusb_data *data, > > > > > wake_up_bit(&data->flags, BTUSB_DOWNLOADING); > > > > > } > > > > > > > > > > -static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) > > > > > +static int btusb_recv_event_intel(struct btusb_data *data, struct sk_buff *skb) > > > > > { > > > > > - struct btusb_data *data = hci_get_drvdata(hdev); > > > > > - > > > > > if (test_bit(BTUSB_BOOTLOADER, &data->flags)) { > > > > > struct hci_event_hdr *hdr = (void *)skb->data; > > > > > > > > > > @@ -2336,7 +2385,7 @@ static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) > > > > > } > > > > > } > > > > > > > > > > - return hci_recv_frame(hdev, skb); > > > > > + return hci_recv_frame(data->hdev, skb); > > > > > } > > > > > > > > > > static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) > > > > > @@ -4279,6 +4328,15 @@ static int btusb_shutdown_qca(struct hci_dev *hdev) > > > > > return 0; > > > > > } > > > > > > > > > > +static int btusb_recv_evt(struct btusb_data *data, struct sk_buff *skb) > > > > > +{ > > > > > + if (!enable_interval) > > > > > + return hci_recv_frame(data->hdev, skb); > > > > > + > > > > > + /* Don't delay event processing */ > > > > > + return btusb_rx_queue(data, skb, &data->evt_q, 0); > > > > > +} > > > > > + > > > > > static int btusb_probe(struct usb_interface *intf, > > > > > const struct usb_device_id *id) > > > > > { > > > > > @@ -4362,6 +4420,11 @@ static int btusb_probe(struct usb_interface *intf, > > > > > > > > > > INIT_WORK(&data->work, btusb_work); > > > > > INIT_WORK(&data->waker, btusb_waker); > > > > > + INIT_DELAYED_WORK(&data->rx_work, btusb_rx_work); > > > > > + > > > > > + skb_queue_head_init(&data->acl_q); > > > > > + skb_queue_head_init(&data->evt_q); > > > > > + > > > > > init_usb_anchor(&data->deferred); > > > > > init_usb_anchor(&data->tx_anchor); > > > > > spin_lock_init(&data->txlock); > > > > > @@ -4378,7 +4441,7 @@ static int btusb_probe(struct usb_interface *intf, > > > > > data->recv_bulk = btusb_recv_bulk_intel; > > > > > set_bit(BTUSB_BOOTLOADER, &data->flags); > > > > > } else { > > > > > - data->recv_event = hci_recv_frame; > > > > > + data->recv_event = btusb_recv_evt; > > > > > data->recv_bulk = btusb_recv_bulk; > > > > > } > > > > > > > > > > @@ -4867,6 +4930,9 @@ MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size"); > > > > > module_param(enable_autosuspend, bool, 0644); > > > > > MODULE_PARM_DESC(enable_autosuspend, "Enable USB autosuspend by default"); > > > > > > > > > > +module_param(enable_interval, bool, 0644); > > > > > +MODULE_PARM_DESC(enable_interval, "Enable USB polling interval by default"); > > > > > + > > > > > module_param(reset, bool, 0644); > > > > > MODULE_PARM_DESC(reset, "Send HCI reset command on initialization"); > > > > > > > > > > -- > > > > > 2.26.2 > > > > > > > > Can you test these with the set of tests you guys have for Chrome OS? > > > > > > > > -- > > > > Luiz Augusto von Dentz > > > > > > > > -- > > Luiz Augusto von Dentz > > > > -- > Luiz Augusto von Dentz
