Hi Abhishek,
>>> When suspending, update the event filter for BR/EDR devices and the
>>> whitelist for LE devices. BR/EDR devices are added to the event filter
>>> and will auto-connect if found during suspend. For LE, we update the
>>> filter to remove everything that is not wakeable during suspend.
>>> Finally, we disconnect all connected devices and wait for that to
>>> complete before returning in the suspend notifier.
>>>
>>> An example suspend flow with 1 BR/EDR HID device, 1 BR/EDR audio device,
>>> 1 LE HID device, 1 LE non-HID (where HIDs are wakeable):
>>>
>>> PM_PREPARE_SUSPEND:
>>> - Set event filter for BR/EDR HID device
>>> - Clear anything from LE whitelist that is not wakeable
>>> - Add (if not there) the LE HID device
>>> - Disconnect all devices
>>
>> is this really the right order? Why not disconnect all devices first. We are suspending after all, so lets disconnect first and then create the appropriate accept filters.
>>
>> I have the feeling it would also make the overall logic a lot simpler since it fits more into the current model that is used internally for a lot of decision points (especially with LE).
>>
>>> PM_POST_SUSPEND:
>>> - Clear event filter
>>> - Restore LE whitelist (deleting anything not in le_pend_conn or
>>> le_pend_report and then adding from those lists)
>>>
>>> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
>>> ---
>>>
>>> Changes in v2:
>>> * Refactored filters and whitelist settings to its own patch
>>> * Refactored update_white_list to have clearer edge cases
>>> * Add connected devices to whitelist (previously missing corner case)
>>>
>>> include/net/bluetooth/hci.h | 17 +-
>>> include/net/bluetooth/hci_core.h | 5 +
>>> net/bluetooth/hci_event.c | 28 ++-
>>> net/bluetooth/hci_request.c | 308 +++++++++++++++++++++++++------
>>> net/bluetooth/mgmt.c | 8 +
>>> 5 files changed, 298 insertions(+), 68 deletions(-)
>>>
>>> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
>>> index 6293bdd7d862..720d8e633f7e 100644
>>> --- a/include/net/bluetooth/hci.h
>>> +++ b/include/net/bluetooth/hci.h
>>> @@ -932,10 +932,14 @@ struct hci_cp_sniff_subrate {
>>> #define HCI_OP_RESET 0x0c03
>>>
>>> #define HCI_OP_SET_EVENT_FLT 0x0c05
>>> -struct hci_cp_set_event_flt {
>>> - __u8 flt_type;
>>> - __u8 cond_type;
>>> - __u8 condition[0];
>>> +#define HCI_SET_EVENT_FLT_SIZE 9
>>> +struct hci_cp_set_event_filter {
>>> + __u8 flt_type;
>>> + __u8 cond_type;
>>> + struct {
>>> + bdaddr_t bdaddr;
>>> + __u8 auto_accept;
>>> + } __packed addr_conn_flt;
>>> } __packed;
>>>
>>> /* Filter types */
>>> @@ -949,8 +953,9 @@ struct hci_cp_set_event_flt {
>>> #define HCI_CONN_SETUP_ALLOW_BDADDR 0x02
>>>
>>> /* CONN_SETUP Conditions */
>>> -#define HCI_CONN_SETUP_AUTO_OFF 0x01
>>> -#define HCI_CONN_SETUP_AUTO_ON 0x02
>>> +#define HCI_CONN_SETUP_AUTO_OFF 0x01
>>> +#define HCI_CONN_SETUP_AUTO_ON 0x02
>>> +#define HCI_CONN_SETUP_AUTO_ON_WITH_RS 0x03
>>>
>>> #define HCI_OP_READ_STORED_LINK_KEY 0x0c0d
>>> struct hci_cp_read_stored_link_key {
>>> diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
>>> index 74d703e46fb4..49eae4a802ac 100644
>>> --- a/include/net/bluetooth/hci_core.h
>>> +++ b/include/net/bluetooth/hci_core.h
>>> @@ -91,6 +91,9 @@ struct discovery_state {
>>> #define SUSPEND_NOTIFIER_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
>>>
>>> enum suspend_tasks {
>>> + SUSPEND_LE_SET_SCAN_ENABLE,
>>> + SUSPEND_DISCONNECTING,
>>> +
>>> SUSPEND_PREPARE_NOTIFIER,
>>> __SUSPEND_NUM_TASKS
>>> };
>>> @@ -406,6 +409,8 @@ struct hci_dev {
>>> struct work_struct suspend_prepare;
>>> enum suspended_state suspend_state_next;
>>> enum suspended_state suspend_state;
>>> + int disconnect_counter;
>>> + bool freeze_filters;
>>>
>>> wait_queue_head_t suspend_wait_q;
>>> DECLARE_BITMAP(suspend_tasks, __SUSPEND_NUM_TASKS);
>>> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
>>> index 6ddc4a74a5e4..76d25b3f4c73 100644
>>> --- a/net/bluetooth/hci_event.c
>>> +++ b/net/bluetooth/hci_event.c
>>> @@ -2474,6 +2474,7 @@ static void hci_inquiry_result_evt(struct hci_dev *hdev, struct sk_buff *skb)
>>> static void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
>>> {
>>> struct hci_ev_conn_complete *ev = (void *) skb->data;
>>> + struct inquiry_entry *ie;
>>> struct hci_conn *conn;
>>>
>>> BT_DBG("%s", hdev->name);
>>> @@ -2482,14 +2483,29 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
>>>
>>> conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
>>> if (!conn) {
>>> - if (ev->link_type != SCO_LINK)
>>> - goto unlock;
>>> + /* Connection may not exist if auto-connected. Check the inquiry
>>> + * cache to see if we've already discovered this bdaddr before.
>>> + * Create a new connection if it was previously discovered.
>>> + */
>>> + ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr);
>>> + if (ie) {
>>> + conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr,
>>> + HCI_ROLE_SLAVE);
>>> + if (!conn) {
>>> + bt_dev_err(hdev, "no memory for new conn");
>>> + goto unlock;
>>> + }
>>> + } else {
>>> + if (ev->link_type != SCO_LINK)
>>> + goto unlock;
>>
>> We are not going to get SCO_LINK auto-connected and thus we should really have it done just for ACL links. I don’t have good proposal to structure this handling at the moment, but we need to clean this up a bit.
>
> Ack, will look deeper into this.
>
>>
>>> - conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr);
>>> - if (!conn)
>>> - goto unlock;
>>> + conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK,
>>> + &ev->bdaddr);
>>> + if (!conn)
>>> + goto unlock;
>>>
>>> - conn->type = SCO_LINK;
>>> + conn->type = SCO_LINK;
>>> + }
>>> }
>>>
>>> if (!ev->status) {
>>> diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
>>> index 08908469c043..c930b9ff1cfd 100644
>>> --- a/net/bluetooth/hci_request.c
>>> +++ b/net/bluetooth/hci_request.c
>>> @@ -34,6 +34,12 @@
>>> #define HCI_REQ_PEND 1
>>> #define HCI_REQ_CANCELED 2
>>>
>>> +#define LE_SCAN_FLAG_SUSPEND 0x1
>>> +#define LE_SCAN_FLAG_ALLOW_RPA 0x2
>>> +
>>> +#define LE_SUSPEND_SCAN_WINDOW 0x0012
>>> +#define LE_SUSPEND_SCAN_INTERVAL 0x0060
>>> +
>>> void hci_req_init(struct hci_request *req, struct hci_dev *hdev)
>>> {
>>> skb_queue_head_init(&req->cmd_q);
>>> @@ -654,6 +660,12 @@ void hci_req_add_le_scan_disable(struct hci_request *req)
>>> {
>>> struct hci_dev *hdev = req->hdev;
>>>
>>> + /* Early exit if we've frozen filters for suspend*/
>>
>> Please fix the coding style for comments. Extra space required between suspend and */
>>
>> I also have the feeling that we should split BR/EDR from LE support. I think we can merge the BR/EDR support quicker since it is a lot simpler. Especially when it stands on its own.
>
> Ack. I kept them merged because I didn't want to change the request
> completion function but I can separate them.
>
>>
>>> + if (hdev->freeze_filters) {
>>> + BT_DBG("Filters are frozen for suspend");
>>> + return;
>>> + }
>>> +
>>> if (use_ext_scan(hdev)) {
>>> struct hci_cp_le_set_ext_scan_enable cp;
>>>
>>> @@ -670,23 +682,67 @@ void hci_req_add_le_scan_disable(struct hci_request *req)
>>> }
>>> }
>>>
>>> -static void add_to_white_list(struct hci_request *req,
>>> - struct hci_conn_params *params)
>>> +static void del_from_white_list(struct hci_request *req, bdaddr_t *bdaddr,
>>> + u8 bdaddr_type)
>>> +{
>>> + struct hci_cp_le_del_from_white_list cp;
>>> +
>>> + cp.bdaddr_type = bdaddr_type;
>>> + bacpy(&cp.bdaddr, bdaddr);
>>> +
>>> + BT_DBG("Remove %pMR (0x%x) from whitelist", &cp.bdaddr, cp.bdaddr_type);
>>> + hci_req_add(req, HCI_OP_LE_DEL_FROM_WHITE_LIST, sizeof(cp), &cp);
>>> +}
>>> +
>>> +/* Adds connection to white list if needed. On error, returns -1 */
>>> +static int add_to_white_list(struct hci_request *req,
>>> + struct hci_conn_params *params, u8 *num_entries,
>>> + u8 flags)
>>> {
>>> struct hci_cp_le_add_to_white_list cp;
>>> + struct hci_dev *hdev = req->hdev;
>>> + bool allow_rpa = !!(flags & LE_SCAN_FLAG_ALLOW_RPA);
>>> + bool suspend = !!(flags & LE_SCAN_FLAG_SUSPEND);
>>>
>>> + /* Already in white list */
>>> + if (hci_bdaddr_list_lookup(&hdev->le_white_list, ¶ms->addr,
>>> + params->addr_type))
>>> + return 0;
>>> +
>>> + /* Select filter policy to accept all advertising */
>>> + if (*num_entries >= hdev->le_white_list_size)
>>> + return -1;
>>> +
>>> + /* White list can not be used with RPAs */
>>> + if (!allow_rpa &&
>>> + hci_find_irk_by_addr(hdev, ¶ms->addr, params->addr_type)) {
>>> + return -1;
>>> + }
>>> +
>>> + /* During suspend, only wakeable devices can be in whitelist */
>>> + if (suspend && !hci_bdaddr_list_lookup(&hdev->wakeable, ¶ms->addr,
>>> + params->addr_type))
>>> + return 0;
>>> +
>>> + *num_entries += 1;
>>> cp.bdaddr_type = params->addr_type;
>>> bacpy(&cp.bdaddr, ¶ms->addr);
>>>
>>> + BT_DBG("Add %pMR (0x%x) to whitelist", &cp.bdaddr, cp.bdaddr_type);
>>> hci_req_add(req, HCI_OP_LE_ADD_TO_WHITE_LIST, sizeof(cp), &cp);
>>> +
>>> + return 0;
>>> }
>>>
>>> -static u8 update_white_list(struct hci_request *req)
>>> +static u8 update_white_list(struct hci_request *req, u8 flags)
>>> {
>>> struct hci_dev *hdev = req->hdev;
>>> struct hci_conn_params *params;
>>> struct bdaddr_list *b;
>>> - uint8_t white_list_entries = 0;
>>> + u8 white_list_entries = 0;
>>> + bool allow_rpa = !!(flags & LE_SCAN_FLAG_ALLOW_RPA);
>>> + bool suspend = !!(flags & LE_SCAN_FLAG_SUSPEND);
>>> + bool wakeable, pend_conn, pend_report;
>>>
>>> /* Go through the current white list programmed into the
>>> * controller one by one and check if that address is still
>>> @@ -695,26 +751,42 @@ static u8 update_white_list(struct hci_request *req)
>>> * command to remove it from the controller.
>>> */
>>> list_for_each_entry(b, &hdev->le_white_list, list) {
>>> - /* If the device is neither in pend_le_conns nor
>>> - * pend_le_reports then remove it from the whitelist.
>>> + wakeable = !!hci_bdaddr_list_lookup(&hdev->wakeable, &b->bdaddr,
>>> + b->bdaddr_type);
>>> + pend_conn = hci_pend_le_action_lookup(&hdev->pend_le_conns,
>>> + &b->bdaddr,
>>> + b->bdaddr_type);
>>> + pend_report = hci_pend_le_action_lookup(&hdev->pend_le_reports,
>>> + &b->bdaddr,
>>> + b->bdaddr_type);
>>> +
>>> + /* During suspend, we remove all non-wakeable devices
>>> + * and leave all others alone. Connected devices will be
>>> + * disconnected during suspend but may not be in the pending
>>> + * list yet.
>>> */
>>> - if (!hci_pend_le_action_lookup(&hdev->pend_le_conns,
>>> - &b->bdaddr, b->bdaddr_type) &&
>>> - !hci_pend_le_action_lookup(&hdev->pend_le_reports,
>>> - &b->bdaddr, b->bdaddr_type)) {
>>> - struct hci_cp_le_del_from_white_list cp;
>>> -
>>> - cp.bdaddr_type = b->bdaddr_type;
>>> - bacpy(&cp.bdaddr, &b->bdaddr);
>>> -
>>> - hci_req_add(req, HCI_OP_LE_DEL_FROM_WHITE_LIST,
>>> - sizeof(cp), &cp);
>>> - continue;
>>> - }
>>> + if (suspend) {
>>> + if (!wakeable) {
>>> + del_from_white_list(req, &b->bdaddr,
>>> + b->bdaddr_type);
>>> + continue;
>>> + }
>>> + } else {
>>> + /* If the device is not likely to connect or report,
>>> + * remove it from the whitelist.
>>> + */
>>> + if (!pend_conn && !pend_report) {
>>> + del_from_white_list(req, &b->bdaddr,
>>> + b->bdaddr_type);
>>> + continue;
>>> + }
>>>
>>> - if (hci_find_irk_by_addr(hdev, &b->bdaddr, b->bdaddr_type)) {
>>> /* White list can not be used with RPAs */
>>> - return 0x00;
>>> + if (!allow_rpa &&
>>> + hci_find_irk_by_addr(hdev, &b->bdaddr,
>>> + b->bdaddr_type)) {
>>> + return 0x00;
>>> + }
>>> }
>>>
>>> white_list_entries++;
>>> @@ -731,47 +803,30 @@ static u8 update_white_list(struct hci_request *req)
>>> * white list.
>>> */
>>> list_for_each_entry(params, &hdev->pend_le_conns, action) {
>>> - if (hci_bdaddr_list_lookup(&hdev->le_white_list,
>>> - ¶ms->addr, params->addr_type))
>>> - continue;
>>> -
>>> - if (white_list_entries >= hdev->le_white_list_size) {
>>> - /* Select filter policy to accept all advertising */
>>> + if (add_to_white_list(req, params, &white_list_entries, flags))
>>> return 0x00;
>>> - }
>>> -
>>> - if (hci_find_irk_by_addr(hdev, ¶ms->addr,
>>> - params->addr_type)) {
>>> - /* White list can not be used with RPAs */
>>> - return 0x00;
>>> - }
>>> -
>>> - white_list_entries++;
>>> - add_to_white_list(req, params);
>>> }
>>>
>>> /* After adding all new pending connections, walk through
>>> * the list of pending reports and also add these to the
>>> - * white list if there is still space.
>>> + * white list if there is still space. Abort if space runs out.
>>> */
>>> list_for_each_entry(params, &hdev->pend_le_reports, action) {
>>> - if (hci_bdaddr_list_lookup(&hdev->le_white_list,
>>> - ¶ms->addr, params->addr_type))
>>> - continue;
>>> -
>>> - if (white_list_entries >= hdev->le_white_list_size) {
>>> - /* Select filter policy to accept all advertising */
>>> + if (add_to_white_list(req, params, &white_list_entries, flags))
>>> return 0x00;
>>> - }
>>> + }
>>>
>>> - if (hci_find_irk_by_addr(hdev, ¶ms->addr,
>>> - params->addr_type)) {
>>> - /* White list can not be used with RPAs */
>>> - return 0x00;
>>> + /* Currently connected devices will be missing from the white list and
>>> + * we need to insert them into the whitelist if they are wakeable. We
>>> + * can't insert later because we will have already returned from the
>>> + * suspend notifier and would cause a spurious wakeup.
>>> + */
>>> + if (suspend) {
>>> + list_for_each_entry(params, &hdev->le_conn_params, list) {
>>> + if (add_to_white_list(req, params, &white_list_entries,
>>> + flags))
>>> + return 0x00;
>>> }
>>> -
>>> - white_list_entries++;
>>> - add_to_white_list(req, params);
>>> }
>>
>> This goes to my point above. If we just disconnect everything, then the white list programming should be easily. Everything that is pending and have been elected for wakeup + incoming connection will be added. And then we are done. I don’t think much has to change except one extra check if wakeup is allowed or not.
>>
>>>
>>> /* Select filter policy to use white list */
>>> @@ -861,11 +916,26 @@ static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
>>> }
>>> }
>>>
>>> -void hci_req_add_le_passive_scan(struct hci_request *req)
>>> +void __hci_req_add_le_passive_scan(struct hci_request *req, u8 flags)
>>> {
>>> struct hci_dev *hdev = req->hdev;
>>> u8 own_addr_type;
>>> u8 filter_policy;
>>> + u8 window, interval;
>>> +
>>> + /* We allow whitelisting even with RPAs in suspend. In the worst case,
>>> + * we won't be able to wake from devices that use the privacy1.2
>>> + * features. Additionally, once we support privacy1.2 and IRK
>>> + * offloading, we can update this to also check for those conditions.
>>> + */
>>> + if (flags & LE_SCAN_FLAG_SUSPEND)
>>> + flags |= LE_SCAN_FLAG_ALLOW_RPA;
>>> +
>>> + /* Early exit if we've frozen filters for suspend */
>>> + if (hdev->freeze_filters) {
>>> + BT_DBG("Filters are frozen for suspend");
>>> + return;
>>> + }
>>>
>>> /* Set require_privacy to false since no SCAN_REQ are send
>>> * during passive scanning. Not using an non-resolvable address
>>> @@ -881,7 +951,8 @@ void hci_req_add_le_passive_scan(struct hci_request *req)
>>> * happen before enabling scanning. The controller does
>>> * not allow white list modification while scanning.
>>> */
>>> - filter_policy = update_white_list(req);
>>> + BT_DBG("Updating white list with flags = %d", flags);
>>> + filter_policy = update_white_list(req, flags);
>>>
>>> /* When the controller is using random resolvable addresses and
>>> * with that having LE privacy enabled, then controllers with
>>> @@ -896,8 +967,22 @@ void hci_req_add_le_passive_scan(struct hci_request *req)
>>> (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY))
>>> filter_policy |= 0x02;
>>>
>>> - hci_req_start_scan(req, LE_SCAN_PASSIVE, hdev->le_scan_interval,
>>> - hdev->le_scan_window, own_addr_type, filter_policy);
>>> + if (flags & LE_SCAN_FLAG_SUSPEND) {
>>> + window = LE_SUSPEND_SCAN_WINDOW;
>>> + interval = LE_SUSPEND_SCAN_INTERVAL;
>>
>> I think we just want this done via some hdev->suspended variable or similar.
>
> In support of setting a separate flag, it is easier to grep for when a
> specific flag is being used and passed to a function than it is to
> check when a variable is being set in a global context variable.
>
>>
>>> + } else {
>>> + window = hdev->le_scan_window;
>>> + interval = hdev->le_scan_interval;
>>> + }
>>> +
>>> + BT_DBG("LE passive scan with whitelist = %d", filter_policy);
>>> + hci_req_start_scan(req, LE_SCAN_PASSIVE, interval, window,
>>> + own_addr_type, filter_policy);
>>> +}
>>> +
>>> +void hci_req_add_le_passive_scan(struct hci_request *req)
>>> +{
>>> + __hci_req_add_le_passive_scan(req, 0);
>>> }
>>>
>>> static u8 get_adv_instance_scan_rsp_len(struct hci_dev *hdev, u8 instance)
>>> @@ -918,6 +1003,76 @@ static u8 get_adv_instance_scan_rsp_len(struct hci_dev *hdev, u8 instance)
>>> return adv_instance->scan_rsp_len;
>>> }
>>>
>>> +static void hci_req_clear_event_filter(struct hci_request *req)
>>> +{
>>> + struct hci_cp_set_event_filter f;
>>> +
>>> + memset(&f, 0, sizeof(f));
>>> + f.flt_type = HCI_FLT_CLEAR_ALL;
>>> + hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &f);
>>> +
>>> + /* Update page scan state (since we may have modified it when setting
>>> + * the event filter).
>>> + */
>>> + __hci_req_update_scan(req);
>>> +}
>>> +
>>> +static void hci_req_set_event_filter(struct hci_request *req)
>>> +{
>>> + struct bdaddr_list *b;
>>> + struct hci_cp_set_event_filter f;
>>> + struct hci_dev *hdev = req->hdev;
>>> + int filters_updated = 0;
>>> + u8 scan;
>>> +
>>> + /* Always clear event filter when starting */
>>> + hci_req_clear_event_filter(req);
>>> +
>>> + list_for_each_entry(b, &hdev->wakeable, list) {
>>> + if (b->bdaddr_type != BDADDR_BREDR)
>>> + continue;
>>> +
>>> + memset(&f, 0, sizeof(f));
>>> + bacpy(&f.addr_conn_flt.bdaddr, &b->bdaddr);
>>> + f.flt_type = HCI_FLT_CONN_SETUP;
>>> + f.cond_type = HCI_CONN_SETUP_ALLOW_BDADDR;
>>> + f.addr_conn_flt.auto_accept = HCI_CONN_SETUP_AUTO_ON;
>>> +
>>> + BT_DBG("Adding event filters for %pMR", &b->bdaddr);
>>> + hci_req_add(req, HCI_OP_SET_EVENT_FLT, sizeof(f), &f);
>>> +
>>> + filters_updated++;
>>> + }
>>
>> If we would use the wakeable list just for BR/EDR then the filters_updated++ would become redundant and we could just check if the list is empty.
>>
>>> +
>>> + scan = filters_updated ? SCAN_PAGE : SCAN_DISABLED;
>>> + hci_req_add(req, HCI_OP_WRITE_SCAN_ENABLE, 1, &scan);
>>> +}
>>> +
>>> +static void hci_req_enable_le_suspend_scan(struct hci_request *req,
>>> + u8 flags)
>>> +{
>>> + /* Can't change params without disabling first */
>>> + hci_req_add_le_scan_disable(req);
>>> +
>>> + /* Configure params and enable scanning */
>>> + __hci_req_add_le_passive_scan(req, flags);
>>> +
>>> + /* Block suspend notifier on response */
>>> + set_bit(SUSPEND_LE_SET_SCAN_ENABLE, req->hdev->suspend_tasks);
>>> +}
>>> +
>>> +static void le_suspend_req_complete(struct hci_dev *hdev, u8 status, u16 opcode)
>>> +{
>>> + BT_DBG("Request complete opcode=0x%x, status=0x%x", opcode, status);
>>> +
>>> + /* Expecting LE Set scan to return */
>>> + if (opcode == HCI_OP_LE_SET_SCAN_ENABLE &&
>>> + test_and_clear_bit(SUSPEND_LE_SET_SCAN_ENABLE,
>>> + hdev->suspend_tasks)) {
>>> + wake_up(&hdev->suspend_wait_q);
>>> + }
>>> +}
>>> +
>>> /* Call with hci_dev_lock */
>>> void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next)
>>> {
>>> @@ -932,6 +1087,44 @@ void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next)
>>>
>>> hdev->suspend_state = next;
>>>
>>> + hci_req_init(&req, hdev);
>>> + if (next == BT_SUSPENDED) {
>>> + /* Enable event filter for existing devices */
>>> + hci_req_set_event_filter(&req);
>>> +
>>> + /* Enable passive scan at lower duty cycle */
>>> + hci_req_enable_le_suspend_scan(&req, LE_SCAN_FLAG_SUSPEND);
>>> +
>>> + hdev->freeze_filters = true;
>>> +
>>> + /* Run commands before disconnecting */
>>> + hci_req_run(&req, le_suspend_req_complete);
>>> +
>>> + hdev->disconnect_counter = 0;
>>> + /* Soft disconnect everything (power off)*/
>>> + list_for_each_entry(conn, &hdev->conn_hash.list, list) {
>>> + hci_disconnect(conn, HCI_ERROR_REMOTE_POWER_OFF);
>>> + hdev->disconnect_counter++;
>>> + }
>>> +
>>> + if (hdev->disconnect_counter > 0) {
>>> + BT_DBG("Had %d disconnects. Will wait on them",
>>> + hdev->disconnect_counter);
>>> + set_bit(SUSPEND_DISCONNECTING, hdev->suspend_tasks);
>>> + }
>>> + } else {
>>> + hdev->freeze_filters = false;
>>> +
>>> + hci_req_clear_event_filter(&req);
>>> +
>>> + /* Reset passive/background scanning to normal */
>>> + hci_req_enable_le_suspend_scan(&req, 0);
>>> +
>>> + hci_req_run(&req, le_suspend_req_complete);
>>> + }
>>> +
>>> + hdev->suspend_state = next;
>>> +
>>> done:
>>> clear_bit(SUSPEND_PREPARE_NOTIFIER, hdev->suspend_tasks);
>>> wake_up(&hdev->suspend_wait_q);
>>> @@ -2034,6 +2227,9 @@ void __hci_req_update_scan(struct hci_request *req)
>>> if (mgmt_powering_down(hdev))
>>> return;
>>>
>>> + if (hdev->freeze_filters)
>>> + return;
>>> +
>>> if (hci_dev_test_flag(hdev, HCI_CONNECTABLE) ||
>>> disconnected_whitelist_entries(hdev))
>>> scan = SCAN_PAGE;
>>> diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
>>> index 58468dfa112f..269ce70e501c 100644
>>> --- a/net/bluetooth/mgmt.c
>>> +++ b/net/bluetooth/mgmt.c
>>> @@ -7451,6 +7451,14 @@ void mgmt_device_disconnected(struct hci_dev *hdev, bdaddr_t *bdaddr,
>>>
>>> mgmt_event(MGMT_EV_DEVICE_DISCONNECTED, hdev, &ev, sizeof(ev), sk);
>>>
>>> + if (hdev->disconnect_counter > 0) {
>>> + hdev->disconnect_counter--;
>>> + if (hdev->disconnect_counter <= 0) {
>>> + clear_bit(SUSPEND_DISCONNECTING, hdev->suspend_tasks);
>>> + wake_up(&hdev->suspend_wait_q);
>>> + }
>>> + }
>>> +
>>
>> I think this disconnect_counter is a bit racy. I would rather check that our connection hash is empty.
>>
>> In addition, I have the feeling we better disable LE scanning BR/EDR page scan first. So that we clearly do not have any artifacts of accidental incoming connections.
>>
>> The first step when going to suspend should clean the house
>>
>> 1) Set a flag that all BR/EDR and LE connection attempts are rejected
>> 2) Disable BR/EDR page scan
>> 3) Disable LE advertising
>> 2) Disable LE scanning / BR/EDR inquiry
>> 4) Disconnect all
>>
>> Now we have a clean house and we now prepare for wakeup triggers
>>
>> 1) Clear flag and allow incoming connection
>> 2) Set BR/EDR event filter and enable page scan if needed
>> 3) Set LE whitelist and enable scanning if needed
>>
>> When we wake up, then we also just need to reset the filters
>>
>> 1) Clear BR/EDR event filter and enable page scan if needed
>> 2) Update LE white and enable scanning if needed
>> 3) Restore LE scanning / BR/EDR inquiry
>>
>
> I think this is reasonable so I will try to implement it. Might take
> me a couple of days (traveling out of country) so expect the next
> patch series early next week.
I just wanted to quickly check if you run into any troubles with the changes?
Regards
Marcel
