Hi Brian,
I am using latest bluez and ell trees on ubuntu 18.04. Log windows
showing segmentation fault if it helps. I ran demon first and then
mesh-cfgclient
vallapaneni@venkat-laptop:~$ sudo ~/tools/bluez/mesh/bluetooth-meshd
D-Bus ready
Request name success
Loading node configuration from /var/lib/bluetooth/mesh
filter_set id: 1, --> 2b
filter_set id: 2, --> 29
filter_set id: 3, --> 2a
filter_set id: 4, --> 2b
Controller hci 0 is in use
vallapaneni@venkat-laptop:~/tools/bluez$ sudo
~/tools/bluez/tools/mesh-cfgclient
Warning: config file "/home/vallapaneni/.config/meshcfg/config_db.json"
not found
[mesh-cfgclient]# create
Segmentation fault
vallapaneni@venkat-laptop:~/tools/bluez$
Rgds,
Venkat.
On 28/11/19 9:37 pm, Gix, Brian wrote:
Hi Venkat,
On Nov 28, 2019, at 2:59 AM, Venkat Vallapaneni <vallapaneni@xxxxxxxxxxxxxx> wrote:
Hi Brian,
Thanks for the response. Yes, I am using PB-GATT barrier. With bluetooothd running, I am able to provision my device.
Ok... well if this is specifically to play with Zephyr, you can build it to accept PB-ADV based provisioning as well. But i think Zephyrs mesh tip is PN-GATT by default.
I also tried mesh-cfgclient but unsuccessful. I launched the shell with mesh-cfgclient (with bluetooth-meshd running) and I gave create command in the shell. I see segmentation fault. Any steps I am missing?
Are you on the tip of both the BlueZ tree, and the ELL tree? Also, what linux distro are you using?
Is mesh-cfgclient only for provisioning or also for sending mesh messages also?
mesh-cfgclient not only provisions devices with PB-ADV, but it also is a full featured Config Client. It can send keys, bindings, subscriptions, and publications.
Rgds,
Venkat.
On 28/11/19 4:22 am, Gix, Brian wrote:
Hi Venkat,
Are you attempting to provision a device that requires PB-GATT provisioning? If so, the bluetoothd daemon must be up and running. However, this tool is old, and will probably be deprecated at some point.
However most Mesh devices should support Advertising based provisioning.
The Mesh daemon (Bluetooth-meshd) and the mesh-cfgclient tool (in the tools directory) has been undergoing modification even since v5.52, so you will want to checkout the tip.
./tools/mesh-cfgclient is the tool most appropriate for mesh development today.
On Nov 26, 2019, at 8:16 PM, Venkat Vallapaneni <vallapaneni@xxxxxxxxxxxxxx> wrote:
Hi,
I am trying to use bluez 5.52 for provisioning a bluetooth mesh capable device. When I gave provision <uuid>, I get this below error. Please let me know what I am missing.
I am using ell 0.26 on ubuntu 18.04. I am able to provision successfully with bluez 5.50.
AcquireWrite success: fd 8 MTU 69
GATT-TX: 03 00 10
*sendmsg: Socket operation on non-socket*[Zephyr]#
Rgds,
Venkat.
