[PATCH 2/2] Bluetooth: btusb: Reset realtek devices on user suspend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Reset realtek devices on user suspend if not configured as a wakeup source.

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
---

 drivers/bluetooth/btusb.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a9c35ebb30f8..ce3a10642f4e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -493,6 +493,8 @@ struct btusb_data {
 
 	int oob_wake_irq;   /* irq for out-of-band wake-on-bt */
 	unsigned cmd_timeout_cnt;
+
+	bool reset_on_suspend; /* reset on suspend if not a wakeup source */
 };
 
 
@@ -3818,6 +3820,8 @@ static int btusb_probe(struct usb_interface *intf,
 		 * (DEVICE_REMOTE_WAKEUP)
 		 */
 		set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
+		/* We'll explicitly reset the device around user suspend too. */
+		data->reset_on_suspend = true;
 	}
 #endif
 
@@ -4007,6 +4011,22 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
 	return 0;
 }
 
+static int btusb_suspend_noirq(struct usb_interface *intf, pm_message_t message)
+{
+	struct btusb_data *data = usb_get_intfdata(intf);
+
+	BT_DBG("suspend_noirq %p", intf);
+
+	/* Only reset if not configured for wakeup */
+	if (!device_may_wakeup(&data->udev->dev) &&
+	    data->reset_on_suspend && data->reset_gpio) {
+		BT_DBG("resetting in suspend_noirq\n");
+		gpiod_set_value_cansleep(data->reset_gpio, 1);
+	}
+
+	return 0;
+}
+
 static void play_deferred(struct btusb_data *data)
 {
 	struct urb *urb;
@@ -4048,6 +4068,11 @@ static int btusb_resume(struct usb_interface *intf)
 	if (--data->suspend_count)
 		return 0;
 
+	if (data->reset_on_suspend && data->reset_gpio) {
+		BT_DBG("restoring reset in resume\n");
+		gpiod_set_value_cansleep(data->reset_gpio, 0);
+	}
+
 	/* Disable only if not already disabled (keep it balanced) */
 	if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
 		disable_irq(data->oob_wake_irq);
@@ -4107,6 +4132,7 @@ static struct usb_driver btusb_driver = {
 	.disconnect	= btusb_disconnect,
 #ifdef CONFIG_PM
 	.suspend	= btusb_suspend,
+	.suspend_noirq	= btusb_suspend_noirq,
 	.resume		= btusb_resume,
 #endif
 	.id_table	= btusb_table,
-- 
2.23.0.237.gc6a4ce50a0-goog




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux