Hi Marcel, On Fri, Aug 30, 2019 at 09:53:16AM +0200, Marcel Holtmann wrote: > > (Resend to add missing lists, sorry for the noise.) > > > > This series implements bluetooth support for Xunlong Orange Pi 3 board. > > > > The board uses AP6256 WiFi/BT 5.0 chip. > > > > Summary of changes: > > > > - add more delay to let initialize the chip > > - let the kernel detect firmware file path > > - add new compatible and update dt-bindings > > - update Orange Pi 3 / H6 DTS > > > > Please take a look. > > > > thank you and regards, > > Ondrej Jirman > > > > Ondrej Jirman (5): > > dt-bindings: net: Add compatible for BCM4345C5 bluetooth device > > bluetooth: bcm: Add support for loading firmware for BCM4345C5 > > bluetooth: hci_bcm: Give more time to come out of reset > > arm64: dts: allwinner: h6: Add pin configs for uart1 > > arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth > > > > .../bindings/net/broadcom-bluetooth.txt | 1 + > > .../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++ > > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++ > > drivers/bluetooth/btbcm.c | 3 +++ > > drivers/bluetooth/hci_bcm.c | 3 ++- > > 5 files changed, 35 insertions(+), 1 deletion(-) > > all 5 patches have been applied to bluetooth-next tree. The DTS patches (last 2) should go through the arm-soc tree, can you drop them? Thanks! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
