From: Ondrej Jirman <megous@xxxxxxxxxx> (Resend to add missing lists, sorry for the noise.) This series implements bluetooth support for Xunlong Orange Pi 3 board. The board uses AP6256 WiFi/BT 5.0 chip. Summary of changes: - add more delay to let initialize the chip - let the kernel detect firmware file path - add new compatible and update dt-bindings - update Orange Pi 3 / H6 DTS Please take a look. thank you and regards, Ondrej Jirman Ondrej Jirman (5): dt-bindings: net: Add compatible for BCM4345C5 bluetooth device bluetooth: bcm: Add support for loading firmware for BCM4345C5 bluetooth: hci_bcm: Give more time to come out of reset arm64: dts: allwinner: h6: Add pin configs for uart1 arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth .../bindings/net/broadcom-bluetooth.txt | 1 + .../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++ drivers/bluetooth/btbcm.c | 3 +++ drivers/bluetooth/hci_bcm.c | 3 ++- 5 files changed, 35 insertions(+), 1 deletion(-) -- 2.23.0
