Hello Luiz,
Yes, this is the same test with 3 different errors reported by the
PTS. The HCI commands for each error code are included as below.
Thanks!
Test case : GATT/SR/UNS/BI-01-C started
- Running test case with ATT bearer setup over BR/EDR.
- BR/EDR Connection setup successfully.
- BR Security not initiated due to TSPX_security_enabled value.
- Sending an ATT request with an unsupported opcode.
- Received data 0116-0102-01
- Invalid request handle received. Expected=0x0000 Received =0x201.
- Connection terminated successfully.
-Final Verdict: FAIL
GATT/SR/UNS/BI-01-C finished
HCI sniffer - Bluetooth packet analyzer ver 5.50
device: hci0 snap_len: 1500 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:1B:DC:F2:1C:E0 class 0x040110 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 12 bdaddr 00:1B:DC:F2:1C:E0 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 12 slots 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 12
Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 12 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 12 page 1 max 2
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:1B:DC:F2:1C:E0 mode 2 clkoffset 0x0000
< ACL data: handle 12 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0038
Enhanced Retransmission mode
Streaming mode
FCS Option
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 name 'PTS-GATT-E01C'
> HCI Event: IO Capability Response (0x32) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x01 oob 0x00 auth 0x00
Capability: DisplayYesNo (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: IO Capability Request (0x31) plen 6
bdaddr 00:1B:DC:F2:1C:E0
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x03 oob 0x00 auth 0x00
Capability: NoInputNoOutput (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: User Confirmation Request (0x33) plen 10
bdaddr 00:1B:DC:F2:1C:E0 passkey 421373
< HCI Command: User Confirmation Request Reply (0x01|0x002c) plen 6
bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Command Complete (0x0e) plen 10
User Confirmation Request Reply (0x01|0x002c) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Simple Pairing Complete (0x36) plen 7
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:1B:DC:F2:1C:E0 key 9817E8842AA1BDD8469E76A4E83ACEB6 type 4
Type: Unauthenticated Combination Key
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 12 encrypt 0x01
> ACL data: handle 12 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x02b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
Unicast Connectless Data Reception
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 31 scid 0x0040
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 12 flags 0x00 dlen 23
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11
RFC 0x00 (Basic)
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 517
< ACL data: handle 12 flags 0x00 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> ACL data: handle 12 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
< ACL data: handle 12 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0001, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 24
L2CAP(d): cid 0x0040 len 20 [psm 31]
ATT: Prepare Write req (0x16)
attr handle 0x0201, value offset 0x0403
part attr value 0x05 0x06 0x07 0x08 0x09 0x0a 0x0b 0x0c 0x0d
0x0e 0x0f 0x10 0x11 0x12 0x13
< ACL data: handle 12 flags 0x00 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 31]
ATT: Error (0x01)
Error: Invalid handle (1)
Prepare Write req (0x16) on handle 0x0201
> ACL data: handle 12 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 31]
ATT: Read By Group resp (0x11)
attr handle 0x0001, end group handle 0x0007
value 0x00 0x18
attr handle 0x0010, end group handle 0x0015
value 0x01 0x18
< ACL data: handle 12 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0016, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 12 flags 0x00 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
< HCI Command: Read Clock Offset (0x01|0x001f) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Clock Offset (0x01|0x001f) status 0x00 ncmd 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 12 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 12 reason 0x16
Reason: Connection Terminated by Local Host
Test case : GATT/SR/UNS/BI-01-C started
- Running test case with ATT bearer setup over BR/EDR.
- BR/EDR Connection setup successfully.
- BR Security not initiated due to TSPX_security_enabled value.
- Sending an ATT request with an unsupported opcode.
- Received data 010E-0000-01
- Invalid Error Code received. Expected=0x06 Received =0x1.
- Connection terminated successfully.
-Final Verdict: FAIL
GATT/SR/UNS/BI-01-C finished
root@cci:~# hcidump -x
HCI sniffer - Bluetooth packet analyzer ver 5.50
device: hci0 snap_len: 1500 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:1B:DC:F2:1C:E0 class 0x040110 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 12 bdaddr 00:1B:DC:F2:1C:E0 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 12 slots 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 12
Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 12 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 12 page 1 max 2
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:1B:DC:F2:1C:E0 mode 2 clkoffset 0x0000
< ACL data: handle 12 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0038
Enhanced Retransmission mode
Streaming mode
FCS Option
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 name 'PTS-GATT-E01C'
> HCI Event: IO Capability Response (0x32) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x01 oob 0x00 auth 0x00
Capability: DisplayYesNo (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: IO Capability Request (0x31) plen 6
bdaddr 00:1B:DC:F2:1C:E0
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x03 oob 0x00 auth 0x00
Capability: NoInputNoOutput (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: User Confirmation Request (0x33) plen 10
bdaddr 00:1B:DC:F2:1C:E0 passkey 605930
< HCI Command: User Confirmation Request Reply (0x01|0x002c) plen 6
bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Command Complete (0x0e) plen 10
User Confirmation Request Reply (0x01|0x002c) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Simple Pairing Complete (0x36) plen 7
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:1B:DC:F2:1C:E0 key 487D2063247B68F6031E9D08DB53F9C5 type 4
Type: Unauthenticated Combination Key
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 12 encrypt 0x01
> ACL data: handle 12 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x02b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
Unicast Connectless Data Reception
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 31 scid 0x0040
< ACL data: handle 12 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 12 flags 0x00 dlen 23
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11
RFC 0x00 (Basic)
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 517
< ACL data: handle 12 flags 0x00 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> ACL data: handle 12 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
< ACL data: handle 12 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0001, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 19
L2CAP(d): cid 0x0040 len 15 [psm 31]
ATT: Read Multi req (0x0e)
Handles
handle 0x0201
handle 0x0403
handle 0x0605
handle 0x0807
handle 0x0a09
handle 0x0c0b
handle 0x0e0d
< ACL data: handle 12 flags 0x00 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 31]
ATT: Error (0x01)
Error: Invalid handle (1)
Read Multi req (0x0e) on handle 0x0000
> ACL data: handle 12 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 31]
ATT: Read By Group resp (0x11)
attr handle 0x0001, end group handle 0x0007
value 0x00 0x18
attr handle 0x0010, end group handle 0x0015
value 0x01 0x18
< ACL data: handle 12 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0016, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
> ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 12 flags 0x00 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 12 packets 1
< HCI Command: Read Clock Offset (0x01|0x001f) plen 2
handle 12
> HCI Event: Command Status (0x0f) plen 4
Read Clock Offset (0x01|0x001f) status 0x00 ncmd 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 12 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 12 reason 0x16
Reason: Connection Terminated by Local Host
Test case : GATT/SR/UNS/BI-01-C started
- Running test case with ATT bearer setup over BR/EDR.
- BR/EDR Connection setup successfully.
- BR Security not initiated due to TSPX_security_enabled value.
- Sending an ATT request with an unsupported opcode.
- Received data 010C-0000-04
- Invalid Error Code received. Expected=0x06 Received =0x4.
- Connection terminated successfully.
-Final Verdict: FAIL
GATT/SR/UNS/BI-01-C finished
HCI sniffer - Bluetooth packet analyzer ver 5.50
device: hci0 snap_len: 1500 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:1B:DC:F2:1C:E0 class 0x040110 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 role 0x00
Role: Master
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 11 bdaddr 00:1B:DC:F2:1C:E0 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 11
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 11 slots 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 11
Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 11 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 11 page 1 max 2
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:1B:DC:F2:1C:E0 mode 2 clkoffset 0x0000
< ACL data: handle 11 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0038
Enhanced Retransmission mode
Streaming mode
FCS Option
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:1B:DC:F2:1C:E0 name 'PTS-GATT-E01C'
> HCI Event: IO Capability Response (0x32) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x01 oob 0x00 auth 0x00
Capability: DisplayYesNo (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: IO Capability Request (0x31) plen 6
bdaddr 00:1B:DC:F2:1C:E0
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
bdaddr 00:1B:DC:F2:1C:E0 capability 0x03 oob 0x00 auth 0x00
Capability: NoInputNoOutput (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: User Confirmation Request (0x33) plen 10
bdaddr 00:1B:DC:F2:1C:E0 passkey 285477
< HCI Command: User Confirmation Request Reply (0x01|0x002c) plen 6
bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Command Complete (0x0e) plen 10
User Confirmation Request Reply (0x01|0x002c) ncmd 1
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Simple Pairing Complete (0x36) plen 7
status 0x00 bdaddr 00:1B:DC:F2:1C:E0
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:1B:DC:F2:1C:E0 key D4B8F555619DFB62C87970AA22E15515 type 4
Type: Unauthenticated Combination Key
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 11 encrypt 0x01
> ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< ACL data: handle 11 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x02b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
Unicast Connectless Data Reception
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 31 scid 0x0040
< ACL data: handle 11 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 11 flags 0x00 dlen 23
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11
RFC 0x00 (Basic)
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 517
< ACL data: handle 11 flags 0x00 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> ACL data: handle 11 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 517
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
< ACL data: handle 11 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0001, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 22
L2CAP(d): cid 0x0040 len 18 [psm 31]
ATT: Read Blob req (0x0c)
handle 0x0201 offset 0x0403
< ACL data: handle 11 flags 0x00 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 31]
ATT: Error (0x01)
Error: Invalid PDU (4)
Read Blob req (0x0c) on handle 0x0000
> ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 31]
ATT: Read By Group resp (0x11)
attr handle 0x0001, end group handle 0x0007
value 0x00 0x18
attr handle 0x0010, end group handle 0x0015
value 0x01 0x18
< ACL data: handle 11 flags 0x00 dlen 11
L2CAP(d): cid 0x0040 len 7 [psm 31]
ATT: Read By Group req (0x10)
start 0x0016, end 0xffff
type-uuid 0x2800
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 11 flags 0x00 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
< HCI Command: Read Clock Offset (0x01|0x001f) plen 2
handle 11
> HCI Event: Command Status (0x0f) plen 4
Read Clock Offset (0x01|0x001f) status 0x00 ncmd 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 11 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 11 reason 0x16
Reason: Connection Terminated by Local Host
On Wed, Jul 3, 2019 at 8:07 AM Luiz Augusto von Dentz
<luiz.dentz@xxxxxxxxx> wrote:
>
> Hi,
>
> On Wed, Jul 3, 2019 at 5:42 PM Edward Fung <jjsheepman@xxxxxxxxx> wrote:
> >
> > Hello team,
> >
> > I'm performing PTS testing (PTS 7.4.1 Build 2 and Bluez 5.50 stack)
> > for SIG certification and the test case GATT/SR/UNS/BI-01-C always
> > fails with the following response error codes. Can anyone shed some
> > light on this? Thank you!
> >
> > Test case : GATT/SR/UNS/BI-01-C started
> > - Running test case with ATT bearer setup over BR/EDR.
> > - BR/EDR Connection setup successfully.
> > - BR Security not initiated due to TSPX_security_enabled value.
> > - Sending an ATT request with an unsupported opcode.
> > - Received data 010C-0000-04
> > - Invalid Error Code received. Expected=0x06 Received =0x4.
> > - Connection terminated successfully.
> > -Final Verdict: FAIL
> > GATT/SR/UNS/BI-01-C finished
> >
> > Test case : GATT/SR/UNS/BI-01-C started
> > - Running test case with ATT bearer setup over BR/EDR.
> > - BR/EDR Connection setup successfully.
> > - BR Security not initiated due to TSPX_security_enabled value.
> > - Sending an ATT request with an unsupported opcode.
> > - Received data 010E-0000-01
> > - Invalid Error Code received. Expected=0x06 Received =0x1.
> > - Connection terminated successfully.
> > -Final Verdict: FAIL
> > GATT/SR/UNS/BI-01-C finished
> >
> > Test case : GATT/SR/UNS/BI-01-C started
> > - Running test case with ATT bearer setup over BR/EDR.
> > - BR/EDR Connection setup successfully.
> > - BR Security not initiated due to TSPX_security_enabled value.
> > - Sending an ATT request with an unsupported opcode.
> > - Received data 0116-0102-01
> > - Invalid request handle received. Expected=0x0000 Received =0x201.
> > - Connection terminated successfully.
> > -Final Verdict: FAIL
> > GATT/SR/UNS/BI-01-C finished
>
> Is this all the same test which cause different errors to be reported?
> It seems to expect request not supported over invalid PDU, but the
> second one is returning invalid handle which is weird, do you have the
> HCI for these runs?
>
> --
> Luiz Augusto von Dentz
