Hi Raul, On Tue, 2018-08-21 at 00:13 +0530, Raul Piper wrote: > Hello Inga, > it gives the below logs : > > pi@raspberrypi:~/blueZ $ meshctl -c mesh > > Failed to parse local node configuration file mesh/local_node.json > > > > pi@raspberrypi:~/blueZ $ meshctl -v > > meshctl: 5.50 > > i need to do export before executing above commands > > pi@raspberrypi:~ $ LD_LIBRARY_PATH=/usr/local/lib > > pi@raspberrypi:~ $ export LD_LIBRARY_PATH > > > > to avoid the below error : > > pi@raspberrypi:~ $ meshctl -v > > meshctl: error while loading shared libraries: libjson-c.so.4: cannot > open shared object file: No such file or directory > > > can you please assist? > or any experimental patch I could use on BlueZ > > Thanks in advance > Best Regards, > Rp > > On Mon, Aug 20, 2018 at 3:06 AM, Stotland, Inga <inga.stotland@intel. > com> wrote: > > Hi Raul, > > On Sun, 2018-08-19 at 03:03 +0530, Raul Piper wrote: > > > Hello , > > > I have built and BlueZ 5.50 from the source and installed it on > > > raspberry PI 3 W0, but when I am trying to launch the meshctl > > > tool - > > > using ./meshctl (from within or out side the mesh directory) i am > > > getting the below error : > > > > > > Failed to parse provisioning database file prov_db.json > > > > > > I checked the online sanity onfthe above json file and it seems > > > correct. > > > > > > > > > > > > I tried doing the sudo hcitool -lescan - it shows the LE devices > > > and also > > > > > > bluetoothd -v gives 5.50 which shows my compilation and loading > > > of the > > > new BlueZ is alteast correct. > > > > > > I have already installed the c-json lib . > > > > > > Is this a bug in meshctl? > > > > > > Please assist ! > > > > > > > > > Thanks in Advance ! > > > > Are you using the default json file? If so, there's a bug in > > meshctl > > for reading from default location (just subimmted a patch for > > that). > > > > Meanwhile, try running: > > ./meshctl -c mesh > > > > Regards, > > Inga > > > I am not an expert on system setup, but could you please run sudo /sbin/ldconfig -v Regards, Inga
