--- doc/mgmt-api.txt | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt index caba22d..87982e0 100644 --- a/doc/mgmt-api.txt +++ b/doc/mgmt-api.txt @@ -2504,6 +2504,9 @@ Read Advertising Features Command 4 Add TX Power field to Adv_Data 5 Add Appearance field to Scan_Rsp 6 Add Local Name in Scan_Rsp + 7 Secondary Channel with LE 1M + 8 Secondary Channel with LE 2M + 9 Secondary Channel with LE Coded The Flags bit 0 indicates support for connectable advertising and for switching to connectable advertising independent of the @@ -2553,6 +2556,15 @@ Read Advertising Features Command space is limited a short version or no name information. The Local Name will be added at the end of the scan response data. + The Flags bit 7 indicates support for advertising in secondary + channel in LE 1M PHY. + + The Flags bit 8 indicates support for advertising in secondary + channel in LE 2M PHY. Primary channel would be on 1M. + + The Flags bit 9 indicates support for advertising in secondary + channel in LE CODED PHY. + The valid range for Instance identifiers is 1-254. The value 0 is reserved for internal use and the value 255 is reserved for future extensions. However the Max_Instances value for indicating @@ -2613,6 +2625,9 @@ Add Advertising Command 4 Add TX Power field to Adv_Data 5 Add Appearance field to Scan_Rsp 6 Add Local Name in Scan_Rsp + 7 Secondary Channel with LE 1M + 8 Secondary Channel with LE 2M + 9 Secondary Channel with LE Coded When the connectable flag is set, then the controller will use undirected connectable advertising. The value of the connectable @@ -2640,6 +2655,16 @@ Add Advertising Command supported to provide less air traffic for devices implementing broadcaster role. + Secondary channel flags can be used to advertise in secondary + channel with the corresponding PHYs. These flag bits are mutually + exclusive and setting multiple will result in Invalid Parameter + error. Choosing either LE 1M or LE 2M will result in using + extended advertising on the primary channel with LE 1M and the + respectively LE 1M or LE 2M on the secondary channel. Choosing + LE Coded will result in using extended advertising on the primary + and secondary channels with LE Coded. Choosing none of these flags + will result in legacy advertising. + The Duration parameter configures the length of an Instance. The value is in seconds. -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
