This also adds PHY Configuration Changed Event. --- doc/mgmt-api.txt | 81 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt index 8e7de14..caba22d 100644 --- a/doc/mgmt-api.txt +++ b/doc/mgmt-api.txt @@ -2917,6 +2917,72 @@ Set Appearance Command Invalid Index +Get PHY Configuration Command +========================== + + Command Code: 0x0043 + Controller Index: <controller id> + Command Parameters: + Return Parameters: Supported_phys (2 Octet) + Selected_phys (2 Octet) + + This command is used to retrieve the supported PHYs and currently + selected PHYs. + + Supported_phys and Selected_phys is a bitmask with the following bits. + 0 LE 1M TX + 1 LE 1M RX + 2 LE 2M TX + 3 LE 2M RX + 4 LE CODED TX + 5 LE CODED RX + + LE 1M TX and LE 1M RX would be supported by default. + + This command is only available for LE capable controllers. + It will return Not Supported otherwise. + + Possible errors: Not Supported + Invalid Index + +Set PHY Configuration Command +============================= + + Command Code: 0x0044 + Controller Index: <controller id> + Command Parameters: Default_phys (2 Octet) + Return Parameters: + + This command is used to set the default phy to the controller. + + This will be stored and used for all the subsequent scanning + and connection initiation. + + The list of supported PHYs can be retrieved via the + Get PHY Configuration command. Selecting unsupported PHYs will + result in an Invalid Parameters error. + + This can be called at any point to change the preferred PHYs. + + Default_phys is a bitmask with the following bits. + 0 LE 1M TX + 1 LE 1M RX + 2 LE 2M TX + 3 LE 2M RX + 4 LE CODED TX + 5 LE CODED RX + + This command generates a Command Complete event on success + or a Command Status event on failure. + + This command is only available for LE capable controllers. + It will return Not Supported otherwise. + + Possible errors: Not Supported + Invalid Parameters + Invalid Index + + Command Complete Event ====================== @@ -3782,3 +3848,18 @@ Extended Controller Information Changed Event The event will only be sent to management sockets other than the one through which the change was triggered. + +PHY Configuration Changed Event +=============================== + + Event Code: 0x0026 + Controller Index: <controller id> + Event Parameters: Selected_phys (2 Octets) + + This event indicates that default PHYs have been updated. + + This event will only be used after Set PHY Configuration + command has been used at least once. + + The event will only be sent to management sockets other than the + one through which the change was triggered. -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
