Each RAM SKU has a different boot parameter which is used in
HCI_Intel_Reset command after downloading the firmware.
The boot parameter is embedded in the firmware data and to support
multiple SKUs, driver reads the boot parameter while downloading
the firmware instead of using static values per SKU.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxxxxxxxx>
---
drivers/bluetooth/btusb.c | 22 ++++++++++++++++++++--
drivers/bluetooth/hci_intel.c | 23 +++++++++++++++++++++--
2 files changed, 41 insertions(+), 4 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 93db5b9..979d530 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2024,8 +2024,11 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
BT_DBG("%s", hdev->name);
- /* The default boot parameter */
- boot_param = 0x00040800;
+ /* Set the default boot parameter to 0x0 and it is updated to
+ * SKU specific boot parameter after reading Intel_Write_Boot_Params
+ * command while downloading the firmware.
+ */
+ boot_param = 0x00000000;
calltime = ktime_get();
@@ -2269,6 +2272,21 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
while (fw_ptr - fw->data < fw->size) {
struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
+ /* Each SKU has a different reset parameter to use in the
+ * HCI_Intel_Reset command and it is embedded in the firmware
+ * data. So, instead of using static value per SKU, check
+ * the firmware data and save it for later use.
+ */
+ if (cmd->opcode == 0xfc0e) {
+
+ /* The boot parameter is the first 32-bit value
+ * and rest of 3 octets are reserved.
+ */
+ boot_param = get_unaligned_le32(fw_ptr + sizeof(*cmd));
+
+ bt_dev_dbg(hdev, "boot_param=0x%x", boot_param);
+ }
+
frag_len += sizeof(*cmd) + cmd->plen;
/* The parameter length of the secure send command requires
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index acac48d..2053d73 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -33,6 +33,7 @@
#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
+#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -562,8 +563,11 @@ static int intel_setup(struct hci_uart *hu)
hu->hdev->set_diag = btintel_set_diag;
hu->hdev->set_bdaddr = btintel_set_bdaddr;
- /* Default boot parameter */
- boot_param = 0x00040800;
+ /* Set the default boot parameter to 0x0 and it is updated to
+ * SKU specific boot parameter after reading Intel_Write_Boot_Params
+ * command while downloading the firmware.
+ */
+ boot_param = 0x00000000;
calltime = ktime_get();
@@ -824,6 +828,21 @@ static int intel_setup(struct hci_uart *hu)
while (fw_ptr - fw->data < fw->size) {
struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
+ /* Each SKU has a different reset parameter to use in the
+ * HCI_Intel_Reset command and it is embedded in the firmware
+ * data. So, instead of using static value per SKU, check
+ * the firmware data and save it for later use.
+ */
+ if (cmd->opcode == 0xfc0e) {
+
+ /* The boot parameter is the first 32-bit value
+ * and rest of 3 octets are reserved.
+ */
+ boot_param = get_unaligned_le32(fw_ptr + sizeof(*cmd));
+
+ bt_dev_dbg(hdev, "boot_param=0x%x", boot_param);
+ }
+
frag_len += sizeof(*cmd) + cmd->plen;
bt_dev_dbg(hdev, "Patching %td/%zu", (fw_ptr - fw->data),
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
