The Intel_Read_Boot_Params command is used to read boot parameters
from the bootloader and this is Intel generic command used in USB
and UART drivers.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxxxxxxxx>
---
drivers/bluetooth/btintel.c | 51 +++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btintel.h | 8 +++++++
drivers/bluetooth/btusb.c | 53 ++++++++-----------------------------------
drivers/bluetooth/hci_intel.c | 48 +++++++--------------------------------
4 files changed, 76 insertions(+), 84 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 067df4e..46f0e3e 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -589,6 +589,57 @@ int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param)
}
EXPORT_SYMBOL_GPL(btintel_send_intel_reset);
+int btintel_read_boot_params(struct hci_dev *hdev,
+ struct intel_boot_params *params)
+{
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*params)) {
+ bt_dev_err(hdev, "Intel boot parameters size mismatch");
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ memcpy(params, skb->data, sizeof(*params));
+
+ kfree_skb(skb);
+
+ if (params->status) {
+ bt_dev_err(hdev, "Intel boot parameters command failed (%02x)",
+ params->status);
+ return -bt_to_errno(params->status);
+ }
+
+ bt_dev_info(hdev, "Device revision is %u",
+ le16_to_cpu(params->dev_revid));
+
+ bt_dev_info(hdev, "Secure boot is %s",
+ params->secure_boot ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "OTP lock is %s",
+ params->otp_lock ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "API lock is %s",
+ params->api_lock ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "Debug lock is %s",
+ params->debug_lock ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
+ params->min_fw_build_nn, params->min_fw_build_cw,
+ 2000 + params->min_fw_build_yy);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_boot_params);
+
MODULE_AUTHOR("Marcel Holtmann <marcel@xxxxxxxxxxxx>");
MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 3ef2db7..28727b2 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -98,6 +98,8 @@ int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver);
struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
u16 opcode_write);
int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param);
+int btintel_read_boot_params(struct hci_dev *hdev,
+ struct intel_boot_params *params);
#else
@@ -180,4 +182,10 @@ static inline int btintel_send_intel_reset(struct hci_dev *hdev,
{
return -EOPNOTSUPP;
}
+
+static inline int btintel_read_boot_params(struct hci_dev *hdev,
+ struct intel_boot_params *params)
+{
+ return -EOPNOTSUPP;
+}
#endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 979d530..808c245 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2010,9 +2010,8 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
static int btusb_setup_intel_new(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
- struct sk_buff *skb;
struct intel_version ver;
- struct intel_boot_params *params;
+ struct intel_boot_params params;
const struct firmware *fw;
const u8 *fw_ptr;
u32 frag_len;
@@ -2100,55 +2099,24 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
/* Read the secure boot parameters to identify the operating
* details of the bootloader.
*/
- skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
- hdev->name, PTR_ERR(skb));
- return PTR_ERR(skb);
- }
-
- if (skb->len != sizeof(*params)) {
- BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
- kfree_skb(skb);
- return -EILSEQ;
- }
-
- params = (struct intel_boot_params *)skb->data;
-
- bt_dev_info(hdev, "Device revision is %u",
- le16_to_cpu(params->dev_revid));
-
- bt_dev_info(hdev, "Secure boot is %s",
- params->secure_boot ? "enabled" : "disabled");
-
- bt_dev_info(hdev, "OTP lock is %s",
- params->otp_lock ? "enabled" : "disabled");
-
- bt_dev_info(hdev, "API lock is %s",
- params->api_lock ? "enabled" : "disabled");
-
- bt_dev_info(hdev, "Debug lock is %s",
- params->debug_lock ? "enabled" : "disabled");
-
- bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
- params->min_fw_build_nn, params->min_fw_build_cw,
- 2000 + params->min_fw_build_yy);
+ err = btintel_read_boot_params(hdev, ¶ms);
+ if (err)
+ return err;
/* It is required that every single firmware fragment is acknowledged
* with a command complete event. If the boot parameters indicate
* that this bootloader does not send them, then abort the setup.
*/
- if (params->limited_cce != 0x00) {
+ if (params.limited_cce != 0x00) {
BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
- hdev->name, params->limited_cce);
- kfree_skb(skb);
+ hdev->name, params.limited_cce);
return -EINVAL;
}
/* If the OTP has no valid Bluetooth device address, then there will
* also be no valid address for the operational firmware.
*/
- if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
+ if (!bacmp(¶ms.otp_bdaddr, BDADDR_ANY)) {
bt_dev_info(hdev, "No device address configured");
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
@@ -2179,7 +2147,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
case 0x0c: /* WsP */
snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
le16_to_cpu(ver.hw_variant),
- le16_to_cpu(params->dev_revid));
+ le16_to_cpu(params.dev_revid));
break;
case 0x11: /* JfP */
case 0x12: /* ThP */
@@ -2197,7 +2165,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
if (err < 0) {
BT_ERR("%s: Failed to load Intel firmware file (%d)",
hdev->name, err);
- kfree_skb(skb);
return err;
}
@@ -2211,7 +2178,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
case 0x0c: /* WsP */
snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
le16_to_cpu(ver.hw_variant),
- le16_to_cpu(params->dev_revid));
+ le16_to_cpu(params.dev_revid));
break;
case 0x11: /* JfP */
case 0x12: /* ThP */
@@ -2225,8 +2192,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
return -EINVAL;
}
- kfree_skb(skb);
-
if (fw->size < 644) {
BT_ERR("%s: Invalid size of firmware file (%zu)",
hdev->name, fw->size);
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index 2053d73..f83b9da 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -545,7 +545,7 @@ static int intel_setup(struct hci_uart *hu)
struct hci_dev *hdev = hu->hdev;
struct sk_buff *skb;
struct intel_version ver;
- struct intel_boot_params *params;
+ struct intel_boot_params params;
struct list_head *p;
const struct firmware *fw;
const u8 *fw_ptr;
@@ -662,53 +662,24 @@ static int intel_setup(struct hci_uart *hu)
/* Read the secure boot parameters to identify the operating
* details of the bootloader.
*/
- skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_CMD_TIMEOUT);
- if (IS_ERR(skb)) {
- bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
- PTR_ERR(skb));
- return PTR_ERR(skb);
- }
-
- if (skb->len != sizeof(*params)) {
- bt_dev_err(hdev, "Intel boot parameters size mismatch");
- kfree_skb(skb);
- return -EILSEQ;
- }
-
- params = (struct intel_boot_params *)skb->data;
- if (params->status) {
- bt_dev_err(hdev, "Intel boot parameters command failure (%02x)",
- params->status);
- err = -bt_to_errno(params->status);
- kfree_skb(skb);
+ err = btintel_read_boot_params(hdev, ¶ms);
+ if (err)
return err;
- }
-
- bt_dev_info(hdev, "Device revision is %u",
- le16_to_cpu(params->dev_revid));
-
- bt_dev_info(hdev, "Secure boot is %s",
- params->secure_boot ? "enabled" : "disabled");
-
- bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
- params->min_fw_build_nn, params->min_fw_build_cw,
- 2000 + params->min_fw_build_yy);
/* It is required that every single firmware fragment is acknowledged
* with a command complete event. If the boot parameters indicate
* that this bootloader does not send them, then abort the setup.
*/
- if (params->limited_cce != 0x00) {
+ if (params.limited_cce != 0x00) {
bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
- params->limited_cce);
- kfree_skb(skb);
+ params.limited_cce);
return -EINVAL;
}
/* If the OTP has no valid Bluetooth device address, then there will
* also be no valid address for the operational firmware.
*/
- if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
+ if (!bacmp(¶ms.otp_bdaddr, BDADDR_ANY)) {
bt_dev_info(hdev, "No device address configured");
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
@@ -738,7 +709,7 @@ static int intel_setup(struct hci_uart *hu)
case 0x0c: /* WsP */
snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
le16_to_cpu(ver.hw_variant),
- le16_to_cpu(params->dev_revid));
+ le16_to_cpu(params.dev_revid));
break;
case 0x12: /* ThP */
snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.sfi",
@@ -756,7 +727,6 @@ static int intel_setup(struct hci_uart *hu)
if (err < 0) {
bt_dev_err(hdev, "Failed to load Intel firmware file (%d)",
err);
- kfree_skb(skb);
return err;
}
@@ -768,7 +738,7 @@ static int intel_setup(struct hci_uart *hu)
case 0x0c: /* WsP */
snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
le16_to_cpu(ver.hw_variant),
- le16_to_cpu(params->dev_revid));
+ le16_to_cpu(params.dev_revid));
break;
case 0x12: /* ThP */
snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.ddc",
@@ -782,8 +752,6 @@ static int intel_setup(struct hci_uart *hu)
return -EINVAL;
}
- kfree_skb(skb);
-
if (fw->size < 644) {
bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
fw->size);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
