Hi Hans, > BCM43341 devices soldered onto the PCB (non-removable) always (AFAICT) > use an UART connection for bluetooth. But they also advertise btsdio > support on their 3th sdio function, this causes 2 problems: > > 1) A non functioning BT HCI getting registered > > 2) Since the btsdio driver does not have suspend/resume callbacks, > mmc_sdio_pre_suspend will return -ENOSYS, causing mmc_pm_notify() > to react as if the SDIO-card is removed and since the slot is > marked as non-removable it will never get detected as inserted again. > Which results in wifi no longer working after a suspend/resume. > > This commit fixes both by making btsdio ignore BCM43341 devices > when connected to a slot which is marked non-removable. > > Cc: stable@xxxxxxxxxxxxxxx > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > drivers/bluetooth/btsdio.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) patch has been applied to bluetooth-next tree. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
