Hi Johan,
>> This patch allows SerDev module to manage serial devices declared as
>> attached to an UART in ACPI table.
>>
>> acpi_serdev_add_device() callback will only take into account entries
>> without enumerated flag set. This flags is set for all entries during
>> ACPI scan, except for SPI and I2C serial devices, and for UART with
>> 2nd patch in the series.
>>
>> Signed-off-by: Frédéric Danis <frederic.danis.oss@xxxxxxxxx>
>> ---
>> drivers/tty/serdev/core.c | 99 ++++++++++++++++++++++++++++++++++++++++++++---
>> 1 file changed, 94 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
>> index c68fb3a..104777d 100644
>> --- a/drivers/tty/serdev/core.c
>> +++ b/drivers/tty/serdev/core.c
>
>> @@ -385,6 +401,74 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
>> return 0;
>> }
>>
>> +#ifdef CONFIG_ACPI
>> +static acpi_status acpi_serdev_register_device(struct serdev_controller *ctrl,
>> + struct acpi_device *adev)
>> +{
>> + struct serdev_device *serdev = NULL;
>> + int err;
>> +
>> + if (acpi_bus_get_status(adev) || !adev->status.present ||
>> + acpi_device_enumerated(adev))
>> + return AE_OK;
>> +
>> + serdev = serdev_device_alloc(ctrl);
>> + if (!serdev) {
>> + dev_err(&ctrl->dev, "failed to allocate Serial device for %s\n",
>
> s/Serial/serdev/
>
>> + dev_name(&adev->dev));
>> + return AE_NO_MEMORY;
>> + }
>> +
>> + ACPI_COMPANION_SET(&serdev->dev, adev);
>> + acpi_device_set_enumerated(adev);
>> +
>> + err = serdev_device_add(serdev);
>> + if (err) {
>> + dev_err(&serdev->dev,
>> + "failure adding ACPI device. status %d\n", err);
>
> s/ACPI/ACPI serdev/?
>
>> + serdev_device_put(serdev);
>> + }
>> +
>> + return AE_OK;
>> +}
>> +
>> +static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level,
>> + void *data, void **return_value)
>> +{
>> + struct serdev_controller *ctrl = data;
>> + struct acpi_device *adev;
>> +
>> + if (acpi_bus_get_device(handle, &adev))
>> + return AE_OK;
>> +
>> + return acpi_serdev_register_device(ctrl, adev);
>> +}
>> +
>> +static int acpi_serdev_register_devices(struct serdev_controller *ctrl)
>> +{
>> + acpi_status status;
>> + acpi_handle handle;
>> +
>> + handle = ACPI_HANDLE(ctrl->dev.parent);
>> + if (!handle)
>> + return -ENODEV;
>> +
>> + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
>> + acpi_serdev_add_device, NULL, ctrl, NULL);
>> + if (ACPI_FAILURE(status)) {
>> + dev_warn(&ctrl->dev, "failed to enumerate Serial slaves\n");
>
> s/Serial/serdev/
>
>> + return -ENODEV;
>> + }
>> +
>> + return 0;
>
> What if there are no slaves defined? I'm not very familiar with the ACPI
> helpers, but from a quick look it seems you'd then end up returning zero
> here which would cause the serdev controller to be registered instead of
> the tty-class device.
>
> [ And if I'm mistaken, you do want to suppress that error message for
> when there are no slaves defined. ]
>
>> +}
>> +#else
>> +static inline int acpi_serdev_register_devices(struct serdev_controller *ctlr)
>
> s/ctlr/ctrl/
>
>> +{
>> + return -ENODEV;
>> +}
>> +#endif /* CONFIG_ACPI */
>> +
>> /**
>> * serdev_controller_add() - Add an serdev controller
>> * @ctrl: controller to be registered.
>> @@ -394,7 +478,7 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
>> */
>> int serdev_controller_add(struct serdev_controller *ctrl)
>> {
>> - int ret;
>> + int ret_of, ret_acpi, ret;
>>
>> /* Can't register until after driver model init */
>> if (WARN_ON(!is_registered))
>> @@ -404,9 +488,14 @@ int serdev_controller_add(struct serdev_controller *ctrl)
>> if (ret)
>> return ret;
>>
>> - ret = of_serdev_register_devices(ctrl);
>> - if (ret)
>> + ret_of = of_serdev_register_devices(ctrl);
>> + ret_acpi = acpi_serdev_register_devices(ctrl);
>> + if (ret_of && ret_acpi) {
>> + dev_dbg(&ctrl->dev, "serdev%d no devices registered: of:%d acpi:%d\n",
>
> "serdev%d" is redundant here as you're using dev_dbg (which will print
> the device name).
>
>> + ctrl->nr, ret_of, ret_acpi);
>> + ret = -ENODEV;
>> goto out_dev_del;
>> + }
>>
>> dev_dbg(&ctrl->dev, "serdev%d registered: dev:%p\n",
>> ctrl->nr, &ctrl->dev);
>
> Hmm, I see it's already used here. No need to follow that example
> though.
lets have an extra patch on top of it that fixes these.
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
