On Wed, Dec 21, 2016 at 12:33:51PM -0800, Rajat Jain wrote:
> Some onboard BT chips (e.g. Marvell 8997) contain a wakeup pin that
> can be connected to a gpio on the CPU side, and can be used to wakeup
> the host out-of-band. This can be useful in situations where the
> in-band wakeup is not possible or not preferable (e.g. the in-band
> wakeup may require the USB host controller to remain active, and
> hence consuming more system power during system sleep).
>
> The oob gpio interrupt to be used for wakeup on the CPU side, is
> read from the device tree node, (using standard interrupt descriptors).
> A devcie tree binding document is also added for the driver. The
> compatible string is in compliance with
> Documentation/devicetree/bindings/usb/usb-device.txt
>
> Signed-off-by: Rajat Jain <rajatja@xxxxxxxxxx>
> Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> ---
> v4: Move the set_bit(BTUSB_OOB_WAKE_DISABLED,..) call to the beginning of
> btusb_config_oob_wake() - caught by Brian.
> v3: Add Brian's "Reviewed-by"
> v2: * Use interrupt-names ("wakeup") instead of assuming first interrupt.
> * Leave it on device tree to specify IRQ flags (level /edge triggered)
> * Mark the device as non wakeable on exit.
>
> Documentation/devicetree/bindings/net/btusb.txt | 40 ++++++++++++
Acked-by: Rob Herring <robh@xxxxxxxxxx>
> drivers/bluetooth/btusb.c | 84 +++++++++++++++++++++++++
> 2 files changed, 124 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/btusb.txt
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
