RE: Bluetooth 6lowpan ping6 slab corruption

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Luiz,
 
> Hi Joshua,
> 
> On Fri, Dec 16, 2016 at 8:46 AM, Wong, Joshua Weng Onn
> <joshua.weng.onn.wong@xxxxxxxxx> wrote:
> > $ ifconfig (look for bt0 interface) << to obtain IPv6 address of slave
> > device
> 
> This is not right, the address of bt0 is in fact the local address not the remote
> address, not sure if that could cause the problems bellow though.
> 

My most sincere apologies as I forgot to mention that I actually performed ifconfig in the slave device to obtain its IPv6 address.
After that, I did a ping6 of the IPv6 address of slave device. This caused the output to appear in the console message.

> > $ ping6 -I bt0 <IPV6_ADDR>     <<<<------ The console message starts to appear
> here during ping6
> >
> > The output of the console message:
> >
> > [  794.985623] Slab corruption (Tainted: G     U         ): skbuff_head_cache
> start=ffff8801f568f700, len=232
> > [  795.008755] 050: 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> > ....kkkkkkkkkkkk [  795.029380] Prev obj: start=ffff8801f568f600,
> > len=232 [  795.044743] 000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> ................
> > [  795.061310] 010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> ................
> > [  795.076752] Next obj: start=ffff8801f568f800, len=232 [
> > 795.088448] 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> > kkkkkkkkkkkkkkkk [  795.102365] 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
> > 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> >
> > The 6lowpan connection between the two devices is connected.
> > I observed that the console message appears once when the master initiates
> the connection to the slave and nothing happens after that.
> > Once I start doing the ping6 from master to slave, the same message appears
> again. This same set of message continues to be printed every 5 seconds or so.
> > This also persists when ping6 is done from the slave to the master.
> >
> > Do you know what could possibly cause this issue?
> >
> > Please let me know if you require further information.
> >
> > Thank you.
> >
> > Best regards,
> > Joshua
> > --
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> 
> --
> Luiz Augusto von Dentz
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the
> body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at
> http://vger.kernel.org/majordomo-info.html

Joshua
��.n��������+%������w��{.n�����{����^n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�

[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux