This driver implements support for iBT2.1 Bluetooth controller embedded
in the AG620 communication combo. The controller needs to be configured
with bddata and can be patched with a binary patch file (pbn).
These operations are performed in manufacturing mode.
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxx>
---
drivers/bluetooth/Kconfig | 11 ++
drivers/bluetooth/Makefile | 1 +
drivers/bluetooth/hci_ag6xx.c | 331 ++++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/hci_ldisc.c | 6 +
drivers/bluetooth/hci_uart.h | 8 +-
5 files changed, 356 insertions(+), 1 deletion(-)
create mode 100644 drivers/bluetooth/hci_ag6xx.c
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index ec6af15..cf50fd2 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -169,6 +169,17 @@ config BT_HCIUART_QCA
Say Y here to compile support for QCA protocol.
+config BT_HCIUART_AG6XX
+ bool "Intel AG6XX protocol support"
+ depends on BT_HCIUART
+ select BT_HCIUART_H4
+ select BT_INTEL
+ help
+ The Intel/AG6XX protocol support enables Bluetooth HCI over serial
+ port interface for Intel ibt 2.1 Bluetooth controllers.
+
+ Say Y here to compile support for Intel AG6XX protocol.
+
config BT_HCIBCM203X
tristate "HCI BCM203x USB driver"
depends on USB
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 07c9cf3..9c18939 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -36,6 +36,7 @@ hci_uart-$(CONFIG_BT_HCIUART_3WIRE) += hci_h5.o
hci_uart-$(CONFIG_BT_HCIUART_INTEL) += hci_intel.o
hci_uart-$(CONFIG_BT_HCIUART_BCM) += hci_bcm.o
hci_uart-$(CONFIG_BT_HCIUART_QCA) += hci_qca.o
+hci_uart-$(CONFIG_BT_HCIUART_AG6XX) += hci_ag6xx.o
hci_uart-objs := $(hci_uart-y)
ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/bluetooth/hci_ag6xx.c b/drivers/bluetooth/hci_ag6xx.c
new file mode 100644
index 0000000..fb44446
--- /dev/null
+++ b/drivers/bluetooth/hci_ag6xx.c
@@ -0,0 +1,331 @@
+/*
+ *
+ * Bluetooth HCI UART driver for Intel/AG6xx devices
+ *
+ * Copyright (C) 2016 Intel Corporation
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btintel.h"
+
+struct ag6xx_data {
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+};
+
+struct pbn_entry {
+ __le32 addr;
+ __le32 plen;
+ __u8 data[0];
+} __packed;
+
+static int ag6xx_open(struct hci_uart *hu)
+{
+ struct ag6xx_data *ag6xx;
+
+ BT_DBG("hu %p", hu);
+
+ ag6xx = kzalloc(sizeof(*ag6xx), GFP_KERNEL);
+ if (!ag6xx)
+ return -ENOMEM;
+
+ skb_queue_head_init(&ag6xx->txq);
+
+ hu->priv = ag6xx;
+ return 0;
+}
+
+static int ag6xx_close(struct hci_uart *hu)
+{
+ struct ag6xx_data *ag6xx = hu->priv;
+
+ BT_DBG("hu %p", hu);
+
+ skb_queue_purge(&ag6xx->txq);
+ kfree_skb(ag6xx->rx_skb);
+ kfree(ag6xx);
+
+ hu->priv = NULL;
+ return 0;
+}
+
+static int ag6xx_flush(struct hci_uart *hu)
+{
+ struct ag6xx_data *ag6xx = hu->priv;
+
+ BT_DBG("hu %p", hu);
+
+ skb_queue_purge(&ag6xx->txq);
+ return 0;
+}
+
+static struct sk_buff *ag6xx_dequeue(struct hci_uart *hu)
+{
+ struct ag6xx_data *ag6xx = hu->priv;
+ struct sk_buff *skb;
+
+ skb = skb_dequeue(&ag6xx->txq);
+ if (!skb)
+ return skb;
+
+ /* Prepend skb with frame type */
+ memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+ return skb;
+}
+
+static int ag6xx_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+ struct ag6xx_data *ag6xx = hu->priv;
+
+ skb_queue_tail(&ag6xx->txq, skb);
+ return 0;
+}
+
+static const struct h4_recv_pkt ag6xx_recv_pkts[] = {
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
+static int ag6xx_recv(struct hci_uart *hu, const void *data, int count)
+{
+ struct ag6xx_data *ag6xx = hu->priv;
+
+ if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+ return -EUNATCH;
+
+ ag6xx->rx_skb = h4_recv_buf(hu->hdev, ag6xx->rx_skb, data, count,
+ ag6xx_recv_pkts,
+ ARRAY_SIZE(ag6xx_recv_pkts));
+ if (IS_ERR(ag6xx->rx_skb)) {
+ int err = PTR_ERR(ag6xx->rx_skb);
+ bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+ ag6xx->rx_skb = NULL;
+ return err;
+ }
+
+ return count;
+}
+
+static int intel_mem_write(struct hci_dev *hdev, u32 addr, u32 plen,
+ const void *data)
+{
+ /* Can write a maximum of 247 bytes per HCI command.
+ * HCI cmd Header (3), Intel mem write header (6), data (247).
+ */
+ while (plen > 0) {
+ struct sk_buff *skb;
+ u8 cmd_param[253], fragment_len = (plen > 247) ? 247 : plen;
+ __le32 leaddr = cpu_to_le32(addr);
+
+ memcpy(cmd_param, &leaddr, 4);
+ cmd_param[4] = 0;
+ cmd_param[5] = fragment_len;
+ memcpy(cmd_param + 6, data, fragment_len);
+
+ skb = __hci_cmd_sync(hdev, 0xfc8e, fragment_len + 6, cmd_param,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+ kfree_skb(skb);
+
+ plen -= fragment_len;
+ data += fragment_len;
+ addr += fragment_len;
+ }
+
+ return 0;
+}
+
+static int ag6xx_setup(struct hci_uart *hu)
+{
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+ struct intel_version ver;
+ const struct firmware *fw;
+ const u8 *fw_ptr;
+ char fwname[64];
+ bool patched = false;
+ int err;
+
+ err = btintel_enter_mfg(hdev);
+ if (err)
+ return err;
+
+ err = btintel_read_version(hdev, &ver);
+ if (err)
+ return err;
+
+ btintel_version_info(hdev, &ver);
+
+ /* The hardware platform number has a fixed value of 0x37 and
+ * for now only accept this single value.
+ */
+ if (ver.hw_platform != 0x37) {
+ bt_dev_err(hdev, "Unsupported Intel hardware platform: 0x%X",
+ ver.hw_platform);
+ return -EINVAL;
+ }
+
+ /* Only the hardware variant iBT 2.1 (AG6XX) is supported by this
+ * firmware setup method.
+ */
+ if (ver.hw_variant != 0x0a) {
+ bt_dev_err(hdev, "Unsupported Intel hardware variant: 0x%x",
+ ver.hw_variant);
+ return -EINVAL;
+ }
+
+ snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bddata",
+ ver.hw_platform, ver.hw_variant);
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to open Intel bddata file: %s (%d)",
+ fwname, err);
+ goto patch;
+ }
+ fw_ptr = fw->data;
+
+ bt_dev_info(hdev, "Applying bddata (%s)", fwname);
+
+ skb = __hci_cmd_sync_ev(hdev, 0xfc2f, fw->size, fw->data,
+ HCI_EV_CMD_STATUS, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Applying bddata failed (%ld)", PTR_ERR(skb));
+ release_firmware(fw);
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ release_firmware(fw);
+
+patch:
+ /* If there is no applied patch, fw_patch_num is always 0x00. In other
+ * cases, current firmware is already patched. No need to patch it.
+ */
+ if (ver.fw_patch_num) {
+ bt_dev_info(hdev, "Device is already patched. patch num: %02x",
+ ver.fw_patch_num);
+ patched = true;
+ goto complete;
+ }
+
+ snprintf(fwname, sizeof(fwname),
+ "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.pbn",
+ ver.hw_platform, ver.hw_variant, ver.hw_revision,
+ ver.fw_variant, ver.fw_revision, ver.fw_build_num,
+ ver.fw_build_ww, ver.fw_build_yy);
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to open Intel patch file: %s(%d)",
+ fwname, err);
+
+ if (err == -EINVAL)
+ goto complete;
+
+ /* If the correct firmware patch file is not found, use the
+ * default firmware patch file instead
+ */
+ snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.pbn",
+ ver.hw_platform, ver.hw_variant);
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to open Intel patch file: %s(%d)",
+ fwname, err);
+ goto complete;
+ }
+ }
+ fw_ptr = fw->data;
+
+ bt_dev_info(hdev, "Patching firmware file (%s)", fwname);
+
+ /* PBN patch file contains a list of binary patches to be applied on top
+ * of the embedded firmware. Each patch entry header contains the target
+ * address and patch size.
+ */
+ while (fw->size > fw_ptr - fw->data) {
+ struct pbn_entry *pbn = (void *)fw_ptr;
+
+ if (pbn->addr == 0xffffffff) {
+ bt_dev_info(hdev, "Patching complete");
+ patched = true;
+ break;
+ }
+
+ if (fw->data + fw->size <= pbn->data + pbn->plen) {
+ bt_dev_info(hdev, "Invalid patch len (%d)", pbn->plen);
+ break;
+ }
+
+ bt_dev_info(hdev, "Patching %td/%zu", (fw_ptr - fw->data),
+ fw->size);
+
+ err = intel_mem_write(hdev, pbn->addr, pbn->plen, pbn->data);
+ if (err) {
+ bt_dev_err(hdev, "Patching failed");
+ break;
+ }
+
+ fw_ptr = pbn->data + pbn->plen;
+ }
+
+ release_firmware(fw);
+
+complete:
+ /* Exit manufacturing mode and reset */
+ err = btintel_exit_mfg(hdev, true, patched);
+
+ return err;
+}
+
+static const struct hci_uart_proto ag6xx_proto = {
+ .id = HCI_UART_AG6XX,
+ .name = "AG6XX",
+ .manufacturer = 2,
+ .open = ag6xx_open,
+ .close = ag6xx_close,
+ .flush = ag6xx_flush,
+ .setup = ag6xx_setup,
+ .recv = ag6xx_recv,
+ .enqueue = ag6xx_enqueue,
+ .dequeue = ag6xx_dequeue,
+};
+
+int __init ag6xx_init(void)
+{
+ return hci_uart_register_proto(&ag6xx_proto);
+}
+
+int __exit ag6xx_deinit(void)
+{
+ return hci_uart_unregister_proto(&ag6xx_proto);
+}
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 73202624..c00168a 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -804,6 +804,9 @@ static int __init hci_uart_init(void)
#ifdef CONFIG_BT_HCIUART_QCA
qca_init();
#endif
+#ifdef CONFIG_BT_HCIUART_AG6XX
+ ag6xx_init();
+#endif
return 0;
}
@@ -836,6 +839,9 @@ static void __exit hci_uart_exit(void)
#ifdef CONFIG_BT_HCIUART_QCA
qca_deinit();
#endif
+#ifdef CONFIG_BT_HCIUART_AG6XX
+ ag6xx_deinit();
+#endif
/* Release tty registration of line discipline */
err = tty_unregister_ldisc(N_HCI);
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 82c92f1..4814ff0 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -35,7 +35,7 @@
#define HCIUARTGETFLAGS _IOR('U', 204, int)
/* UART protocols */
-#define HCI_UART_MAX_PROTO 9
+#define HCI_UART_MAX_PROTO 10
#define HCI_UART_H4 0
#define HCI_UART_BCSP 1
@@ -46,6 +46,7 @@
#define HCI_UART_INTEL 6
#define HCI_UART_BCM 7
#define HCI_UART_QCA 8
+#define HCI_UART_AG6XX 9
#define HCI_UART_RAW_DEVICE 0
#define HCI_UART_RESET_ON_INIT 1
@@ -182,3 +183,8 @@ int bcm_deinit(void);
int qca_init(void);
int qca_deinit(void);
#endif
+
+#ifdef CONFIG_BT_HCIUART_AG6XX
+int ag6xx_init(void);
+int ag6xx_deinit(void);
+#endif
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
