Hi Luiz,
On Tue, Nov 17, 2015 at 3:06 PM, Luiz Augusto von Dentz
<luiz.dentz@xxxxxxxxx> wrote:
> Hi Andrzej,
>
> On Tue, Nov 17, 2015 at 11:11 AM, Andrzej Kaczmarek
> <andrzej.kaczmarek@xxxxxxxxxxx> wrote:
>> Hi Marcel,
>>
>> On Tue, Nov 17, 2015 at 9:40 AM, Marcel Holtmann <marcel@xxxxxxxxxxxx> wrote:
>>> Hi Luiz,
>>>
>>>>> Here's series of patches which adds decoding of AVDTP signalling channel
>>>>> and A2DP codec capabilities information. Few things are missing:
>>>>> - no fragmentation support
>>>>> - some rarely used capabilities are not decoded
>>>>> - ATRAC capabilities are not decoded
>>>>>
>>>>> Other that above, pretty much everything should be decoded.
>>>>>
>>>>> And some sample output from decoder:
>>>>>
>>>>> < ACL Data TX: Handle 256 flags 0x00 dlen 6
>>>>> Channel: 1602 len 2 [PSM 25 mode 0] {chan 2}
>>>>> AVDTP: Discover (0x01) Command: type 0x00 label 6 nosp 0
>>>>>> ACL Data RX: Handle 256 flags 0x02 dlen 14
>>>>> Channel: 66 len 10 [PSM 25 mode 0] {chan 2}
>>>>> AVDTP: Discover (0x01) Response Accept: type 0x00 label 6 nosp 0
>>>>> ACP SEID 1
>>>>> Media Type: Audio
>>>>> SEP Type: SRC
>>>>> In use: No
>>>>> ACP SEID 5
>>>>> Media Type: Audio
>>>>> SEP Type: SRC
>>>>> In use: No
>>>>> ACP SEID 3
>>>>> Media Type: Audio
>>>>> SEP Type: SRC
>>>>> In use: No
>>>>> ACP SEID 2
>>>>> Media Type: Audio
>>>>> SEP Type: SRC
>>>>> In use: No
>>>>
>>>> I guess we can add it In use flag only when set.
>>>
>>> actually btmon is suppose to decode and not be smart about when to show things. So lets really do print all parameters and not leave them out because they are unset.
>>>
>>>>> < ACL Data TX: Handle 256 flags 0x00 dlen 7
>>>>> Channel: 1602 len 3 [PSM 25 mode 0] {chan 2}
>>>>> AVDTP: Get Capabilities (0x02) Command: type 0x00 label 9 nosp 0
>>>>> ACP SEID: 3
>>>>>> ACL Data RX: Handle 256 flags 0x02 dlen 23
>>>>> Channel: 66 len 19 [PSM 25 mode 0] {chan 2}
>>>>> AVDTP: Get Capabilities (0x02) Response Accept: type 0x00 label 9 nosp 0
>>>>> Service Category: Media Transport
>>>>> Service Category: Media Codec
>>>>> Media Type: Audio
>>>>> Media Codec: Non-A2DP
>>>>> Vendor ID: 0x0000004f (APT Licensing Ltd.)
>>>>> Vendor Specific Codec ID: 0x0001 (aptX)
>>>>> Frequency: 0x30
>>>>> 44100
>>>>> 48000
>>>>> Channel Mode: 0x02
>>>>> Stereo
>>>>> Service Category: Content Protection
>>>>> Content Protection Type: SCMS-T
>>>>>
>>>>>
>>>>> < ACL Data TX: Handle 256 flags 0x00 dlen 18
>>>>> Channel: 1602 len 14 [PSM 25 mode 0] {chan 2}
>>>>> AVDTP: Set Configuration (0x03) Command: type 0x00 label 11 nosp 0
>>>>> ACP SEID: 1
>>>>> INT SEID: 1
>>>>> Service Category: Media Transport
>>>>> Service Category: Media Codec
>>>>> Media Type: Audio
>>>>> Media Codec: SBC
>>>>> Frequency: 0x20
>>>>> 44100
>>>>> Channel Mode: 0x01
>>>>> Joint Channel
>>>>> Block Length: 0x10
>>>>> 16
>>>>> Subbands: 0x04
>>>>> 8
>>>>> Allocation Method: 0x01
>>>>> Loudness
>>>>> Minimum Bitpool: 2
>>>>> Maximum Bitpool: 53
>>>>
>>>> Id got with a range instead of 2 field e.g. Bitpool: 2-53. Actually
>>>> overall Id make this more compact instead of having another line for
>>>> the decoded value just input in the same line with the hex value in
>>>> parenthesis.
>>>
>>> Actually the problem is not the bit pool. It is the others. It should be like this:
>>>
>>> Frequency: 44100 (0x20(
>>> Block length: 16 (0x10)
>>> Allocation method: Loudness (0x01)
>>>
>>> And please follow the styles I have introduced in the HCI portion and not make up new stuff. I actually want the strings to primary and also show the raw values.
>>
>> Ok, I'll fix it.
>>
>>>
>>>>
>>>>>> ACL Data RX: Handle 256 flags 0x02 dlen 6
>>>>> Channel: 66 len 2 [PSM 25 mode 0] {chan 2}
>>>>> AVDTP: Set Configuration (0x03) Response Accept: type 0x00 label 11 nosp 0
>>>>>
>>>>>> ACL Data RX: Handle 256 flags 0x02 dlen 6
>>>>> Channel: 66 len 2 [PSM 25 mode 0] {chan 2}
>>>>> AVDTP: Open (0x06) Response Accept: type 0x00 label 12 nosp 0
>>>>>
>>>>>
>>>>> < ACL Data TX: Handle 256 flags 0x00 dlen 7
>>>>> Channel: 1602 len 3 [PSM 25 mode 0] {chan 2}
>>>>> AVDTP: Start (0x07) Command: type 0x00 label 13 nosp 0
>>>>> ACP SEID: 1
>>>>>> ACL Data RX: Handle 256 flags 0x02 dlen 6
>>>>> Channel: 66 len 2 [PSM 25 mode 0] {chan 2}
>>>>> AVDTP: Start (0x07) Response Accept: type 0x00 label 13 nosp 0
>>>>
>>>> Would you be able to include the output above into the patch that
>>>> introduce it? I think it is a bit better to see the formatting each
>>>> patch is introducing and then have proper comments to them.
>>>
>>> Why are we falling back into trying to cramp all stuff into a single line. btmon is verbose on purpose. Deal with i.
>>
>> You mean the" AVDTP: Start ..." line? I wasn't sure which protocol to
>> follow here so "AVDTP: Start" is what you have in HCI and L2CAP
>> (protocol + command), then "Response Accept" is what AVRCP does. And
>> the other parameters from frame header are used the same in all
>> protocols actually. For decoding of AVDTP Transport headers I planned
>> to make it "AVDTP Media: <codec>".
>>
>> Any other idea how this should look like?
>
> I assumed it is a common practice to decode the headers in a single line:
>
> L2CAP: Configure Response (0x05) ident 14 len 6
> SDP: Service Search Attribute Request (0x06) tid 0 len 25
> AVCTP Control: Response: type 0x00 label 7 PID 0x110e
>
> But the format is not very strict, at least not up to now, so perhaps
> we should always follow decode string (raw hex) when decoding fields
> that means AVCTP line about should be:
>
> AVCTP Control: Response (code) type 0x00 label 7 PID 0x110e
>
> I guess for the media it would be fine to have AVDTP Media as the
> header but I wonder how you will be able to detect the codec? Or are
> you planning to decode the RTP headers?
I plan to add simple tracking for streams by storing (some)
information from AVDTP_SET_CONFIGURATION - this way I can identify
contents of transport channel and try to decode relevant headers. I
don't want to just decode RTP since IIRC aptX does not use RTP header
so this would not work properly.
> Btw, we could perhaps have an option to discard audio packets or make
> them 0 length if we want to keep the timestamps, or maybe have this by
> default since it makes the traces much smaller and reconstructing the
> audio stream is something btmon will probably never do although it
> seems wireshark has support to do it Ive never seen it working.
I guess for now we can add option similar to -S (dump SCO traffic),
i.e. do not dump media data by default and enable on request. Perhaps
-M (--media)?
BR,
Andrzej
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
