On 26/09/15 20:45, Jakub Pawlowski wrote: > Hi Steven, > > On Sat, Sep 26, 2015 at 12:35 PM, <linux-bluetooth-list@xxxxxxxxxxx> wrote: >> >> Hi, >> >> Following on from my problems with GATT discovery, I now have another >> issue: I have a Python program which waits for the Connected=True >> PropertiesChanged callback from dbus, then sends a WriteValue to a >> GattCharacteristic1 interface. >> >> The issue is that immediately after the Connected=True message comes >> back, a WriteValue fails with "DBusException: org.bluez.Error.Failed: >> Not connected". However, calling the WriteValue a few seconds later >> executes correctly. > > I had same issue, and I sent patches to fix it around 2 weeks ago. > Which version of bluetoothd are you using ? > Can you retry when running from repository master ? > > >> >> I have bluetoothd running with the debug flag and this is the output >> (sorry it's long - also in pastebin at http://pastebin.com/bnNRGpMq): >> >> Sep 26 19:43:17 bang MainThread:dbusbackend.py@298 Connect to >> B0:B4:48:B9:77:03 >> Sep 26 19:43:17 bang bluetoothd[22254]: >> src/device.c:device_set_auto_connect() B0:B4:48:B9:77:03 auto connect: 1 >> Sep 26 19:43:17 bang bluetoothd[22254]: src/device.c:device_connect_le() >> Connection attempt to: B0:B4:48:B9:77:03 >> Sep 26 19:43:17 bang bluetoothd[22254]: >> src/adapter.c:add_device_complete() B0:B4:48:B9:77:03 (1) added to >> kernel connect list >> Sep 26 19:43:17 bang bluetoothd[22254]: src/device.c:gatt_debug() MTU >> exchange complete, with MTU: 23 >> Sep 26 19:43:18 bang bluetoothd[22254]: >> src/adapter.c:connected_callback() hci0 device B0:B4:48:B9:77:03 >> connected eir_len 0 >> Sep 26 19:43:18 bang kernel: [21277.597432] Bluetooth: SMP security >> requested but not available >> Sep 26 19:43:18 bang bluetoothd[22254]: attrib/gattrib.c:g_attrib_ref() >> 0x80f0f148: g_attrib_ref=1 >> Sep 26 19:43:18 bang bluetoothd[22254]: src/device.c:attio_connected() >> Sep 26 19:43:18 bang bluetoothd[22254]: attrib/gattrib.c:g_attrib_ref() >> 0x80f0f148: g_attrib_ref=2 >> Sep 26 19:43:18 bang bluetoothd[22254]: attrib/gattrib.c:g_attrib_ref() >> 0x80f0f148: g_attrib_ref=3 >> Sep 26 19:43:18 bang bluetoothd[22254]: src/device.c:gatt_debug() MTU >> exchange complete, with MTU: 23 >> >> Sep 26 19:43:18 bang Thread-4:base.py@114 Job "Heating.get_temperature >> (trigger: cron[second='0'], next run at: 2015-09-26 19:44:00 BST)" >> raised an exception: DBusException: org.bluez.Error.Failed: Not connected >> >> Sep 26 19:43:18 bang bluetoothd[22254]: attrib/gattrib.c:g_attrib_ref() >> 0x80edbed8: g_attrib_ref=4 >> Sep 26 19:43:18 bang bluetoothd[22254]: >> attrib/gattrib.c:g_attrib_unref() 0x80edbed8: g_attrib_unref=3 >> Sep 26 19:43:18 bang bluetoothd[22254]: >> attrib/gattrib.c:g_attrib_unref() 0x80edbed8: g_attrib_unref=2 >> Sep 26 19:43:19 bang bluetoothd[22254]: attrib/gattrib.c:g_attrib_ref() >> 0x80f0f148: g_attrib_ref=4 >> Sep 26 19:43:19 bang bluetoothd[22254]: >> attrib/gattrib.c:g_attrib_unref() 0x80f0f148: g_attrib_unref=3 >> Sep 26 19:43:19 bang bluetoothd[22254]: >> attrib/gattrib.c:g_attrib_unref() 0x80f0f148: g_attrib_unref=2 >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() >> Primary services found: 13 >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x0001, end: 0x0007, uuid: 00001800-0000-1000-8000-00805f9b34fb >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x0008, end: 0x000b, uuid: 00001801-0000-1000-8000-00805f9b34fb >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x000c, end: 0x001e, uuid: 0000180a-0000-1000-8000-00805f9b34fb >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x001f, end: 0x0026, uuid: f000aa00-0451-4000-b000-000000000000 >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x0027, end: 0x002e, uuid: f000aa20-0451-4000-b000-000000000000 >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x002f, end: 0x0036, uuid: f000aa40-0451-4000-b000-000000000000 >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x0037, end: 0x003e, uuid: f000aa80-0451-4000-b000-000000000000 >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x003f, end: 0x0046, uuid: f000aa70-0451-4000-b000-000000000000 >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x0047, end: 0x004b, uuid: 0000ffe0-0000-1000-8000-00805f9b34fb >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x004c, end: 0x0050, uuid: f000aa64-0451-4000-b000-000000000000 >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x0051, end: 0x0058, uuid: f000ac00-0451-4000-b000-000000000000 >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x0059, end: 0x0060, uuid: f000ccc0-0451-4000-b000-000000000000 >> Sep 26 19:43:19 bang bluetoothd[22254]: src/device.c:gatt_debug() start: >> 0x0061, end: 0xffff, uuid: f000ffc0-0451-4000-b000-000000000000 >> Sep 26 19:43:19 bang bluetoothd[22254]: >> src/device.c:gatt_client_ready_cb() status: success, error: 0 >> Sep 26 19:43:19 bang bluetoothd[22254]: >> src/device.c:device_svc_resolved() /org/bluez/hci0/dev_B0_B4_48_BA_47_03 >> err 0 >> Sep 26 19:43:19 bang bluetoothd[22254]: >> profiles/gap/gas.c:gap_driver_accept() GAP profile accept >> (B0:B4:48:BA:47:03) >> Sep 26 19:43:19 bang bluetoothd[22254]: >> profiles/gap/gas.c:handle_characteristic() Unsupported characteristic: >> 00002a04-0000-1000-8000-00805f9b34fb >> Sep 26 19:43:19 bang bluetoothd[22254]: >> src/gatt-client.c:btd_gatt_client_ready() GATT client ready >> Sep 26 19:43:20 bang bluetoothd[22254]: src/device.c:gatt_debug() >> Registered handler for "Service Changed": 1 >> Sep 26 19:43:20 bang bluetoothd[22254]: >> profiles/gap/gas.c:read_device_name_cb() GAP Device Name: SensorTag 2.0 >> Sep 26 19:43:20 bang bluetoothd[22254]: >> src/device.c:btd_device_device_set_name() >> /org/bluez/hci0/dev_B0_B4_48_BA_47_03 SensorTag 2.0 >> Sep 26 19:43:20 bang bluetoothd[22254]: >> profiles/gap/gas.c:read_appearance_cb() GAP Appearance: 0x0000 >> >> And after this point if my code calls WriteValue again it completes >> successfully. >> >> Note: I have two of the same device so if there are duplicate lines that >> would explain why. The same thing happens with both devices. >> >> Any help would be gratefully received. >> >> Thanks >> Steven Davies >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
