On Thursday 13 of November 2014 16:17:48 Szymon Janc wrote: > This add definitions for commands and notifications introduced by > Android 5 API. > --- > android/hal-ipc-api.txt | 266 ++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 266 insertions(+) > > diff --git a/android/hal-ipc-api.txt b/android/hal-ipc-api.txt > index cc2530c..67a6205 100644 > --- a/android/hal-ipc-api.txt > +++ b/android/hal-ipc-api.txt > @@ -1449,6 +1449,10 @@ Commands and responses: > Transport (4 octets) > Response parameters: <none> > > + Valid transport value: 0x00 = Auto > + 0x01 = BR/EDR > + 0x02 = LE > + > In case of an error, the error response will be returned. > > Opcode 0x05 - Client Disconnect Device command/response > @@ -1799,6 +1803,174 @@ Commands and responses: > > In case of an error, the error response will be returned. > > + Opcode 0x24 - Client Scan Filter Params Setup command/response > + > + Command parameters: Client Interface (4 octets) > + Action (4 octets) > + Filter Index (4 octets) > + Features (4 octets) > + List Type (4 octets) > + Filter Type (4 octets) > + RSSI High Threshold (4 octets) > + RSSI Low Threshold (4 octets) > + Delivery Mode (4 octets) > + Found Timeout (4 octets) > + Lost Timeout (4 octets) > + Found Timeout Count (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x25 - Client Scan Filter Add Remove command/response > + > + Command parameters: Client Interface (4 octets) > + Action (4 octets) > + Filter Type (4 octets) > + Filter Index (4 octets) > + Company ID (4 octets) > + Company ID Mask (4 octets) > + UUID (16 octets) > + UUID Mask (16 octets) > + Address (6 octets) > + Address Type (1 octet) > + Data Length (4 octets) > + Data (variable) > + Mask Length (4 octets) > + Mask (variable) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x26 - Client Scan Filter Clear command/response > + > + Command parameters: Client Interface (4 octets) > + Filter Index (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x27 - Client Scan Filter Enable command/response > + > + Command parameters: Client Interface (4 octets) > + Enable (1 octet) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x28 - Client Configure MTU command/response > + > + Command parameters: Connection ID (4 octets) > + MTU (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x29 - Client Connection Parameter Update command/response > + > + Command parameters: Address (6 octets) > + Min Interval (4 octets) > + Max Interval (4 octets) > + Latency (4 octets) > + Timeoutl (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x2a - Client Set Scan Parameters command/response > + > + Command parameters: Scan Interval (4 octets) > + Scan Window (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x2b - Client Setup Multi Advertising command/response > + > + Command parameters: Client ID (4 octets) > + Min Interval (4 octets) > + Max Interval (4 octets) > + ADV Type (4 octets) > + Channel Map (4 octets) > + TX Power (4 octets) > + Timeout (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x2c - Client Update Multi Advertising command/response > + > + Command parameters: Client ID (4 octets) > + Min Interval (4 octets) > + Max Interval (4 octets) > + ADV Type (4 octets) > + Channel Map (4 octets) > + TX Power (4 octets) > + Timeout (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x2d - Client Setup Multi Advertising Instance command/response > + > + Command parameters: Client ID (4 octets) > + Set Scan Response (1 octet) > + Include Name (1 octet) > + Include TX Power (1 octet) > + Appearance (4 octets) > + Manufacturer Data Length (4 octets) > + Manufacturer Data (variable) > + Service Data Length (4 octets) > + Service Data (variable) > + Service UUID Length (4 octets) > + Service UUID (variable) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x2e - Client Disable Multi Advertising Instance command/response > + > + Command parameters: Client ID (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x2f - Client Configure Batchscan command/response > + > + Command parameters: Client ID (4 octets) > + Full Max (4 octets) > + Trunc Max (4 octets) > + Notify Threshold (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x30 - Client Enable Batchscan command/response > + > + Command parameters: Client ID (4 octets) > + Scan Mode (4 octets) > + Scan Interval (4 octets) > + Scan Window (4 octets) > + Address Type (4 octets) > + Discard Rule (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x31 - Client Disable Batchscan command/response > + > + Command parameters: Client ID (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > + Opcode 0x32 - Client Read Batchscan Resports command/response > + > + Command parameters: Client ID (4 octets) > + Scan Mode (4 octets) > + Response parameters: <none> > + > + In case of an error, the error response will be returned. > + > Notifications: > > Opcode 0x81 - Client Register notification > @@ -2031,6 +2203,100 @@ Notifications: > Notification parameters: Status (4 octets) > Handle (4 octets) > > + Opcode 0xa0 - Client Configure MTU notification > + > + Notification parameters: Connection ID (4 octets) > + Status (4 octets) > + MTU (4 octets) > + > + Opcode 0xa1 - Client Filter Configuration notification > + > + Notification parameters: Action (4 octets) > + Client ID (4 octets) > + Status (4 octets) > + Filter Type (4 octets) > + Available Space (4 octets) > + > + Opcode 0xa2 - Client Filter Parameters notification > + > + Notification parameters: Action (4 octets) > + Client ID (4 octets) > + Status (4 octets) > + Available Space (4 octets) > + > + Opcode 0xa3 - Client Filter Status notification > + > + Notification parameters: Enable (4 octets) > + Client ID (4 octets) > + Status (4 octets) > + > + Opcode 0xa4 - Client Multi Advertising Enable notification > + > + Notification parameters: Client ID (4 octets) > + Status (4 octets) > + > + Opcode 0xa5 - Client Multi Advertising Update notification > + > + Notification parameters: Client ID (4 octets) > + Status (4 octets) > + > + Opcode 0xa6 - Client Multi Advertising Data notification > + > + Notification parameters: Client ID (4 octets) > + Status (4 octets) > + > + Opcode 0xa7 - Client Multi Advertising Disable notification > + > + Notification parameters: Client ID (4 octets) > + Status (4 octets) > + > + Opcode 0xa8 - Client Congestion notification > + > + Notification parameters: Connection ID (4 octets) > + Congested (1 octet) > + > + Opcode 0xa9 - Client Configure Batchscan notification > + > + Notification parameters: Client ID (4 octets) > + Status (4 octets) > + > + Opcode 0xaa - Client Enable Batchscan notification > + > + Notification parameters: Action (4 octets) > + Client ID (4 octets) > + Status (4 octets) > + > + Opcode 0xab - Client Batchscan Reports notification > + > + Notification parameters: Client ID (4 octets) > + Status (4 octets) > + Report Format (4 octets) > + Num Reports (4 octets) > + Data Length (4 octets) > + Data (variable) > + > + Opcode 0xac - Client Batchscan Threshold notification > + > + Notification parameters: Client ID (4 octets) > + > + Opcode 0xad - Client Track ADV notification > + > + Notification parameters: Client ID (4 octets) > + Filter Index (4 octets) > + Address Type (4 octets) > + Address (6 octets) > + State (4 octets) > + > + Opcode 0xae - Server Indication Sent notification > + > + Notification parameters: Connection ID (4 octets) > + Status (4 octets) > + > + Opcode 0xaf - Server Congestion notification > + > + Notification parameters: Connection ID (4 octets) > + Congested (1 octet) > + > > Bluetooth Handsfree Client HAL (ID 10) > ====================================== > Applied. -- Best regards, Szymon Janc -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
