This add definitions for commands and notifications introduced by Android 5 API. --- android/hal-ipc-api.txt | 266 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 266 insertions(+) diff --git a/android/hal-ipc-api.txt b/android/hal-ipc-api.txt index cc2530c..67a6205 100644 --- a/android/hal-ipc-api.txt +++ b/android/hal-ipc-api.txt @@ -1449,6 +1449,10 @@ Commands and responses: Transport (4 octets) Response parameters: <none> + Valid transport value: 0x00 = Auto + 0x01 = BR/EDR + 0x02 = LE + In case of an error, the error response will be returned. Opcode 0x05 - Client Disconnect Device command/response @@ -1799,6 +1803,174 @@ Commands and responses: In case of an error, the error response will be returned. + Opcode 0x24 - Client Scan Filter Params Setup command/response + + Command parameters: Client Interface (4 octets) + Action (4 octets) + Filter Index (4 octets) + Features (4 octets) + List Type (4 octets) + Filter Type (4 octets) + RSSI High Threshold (4 octets) + RSSI Low Threshold (4 octets) + Delivery Mode (4 octets) + Found Timeout (4 octets) + Lost Timeout (4 octets) + Found Timeout Count (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x25 - Client Scan Filter Add Remove command/response + + Command parameters: Client Interface (4 octets) + Action (4 octets) + Filter Type (4 octets) + Filter Index (4 octets) + Company ID (4 octets) + Company ID Mask (4 octets) + UUID (16 octets) + UUID Mask (16 octets) + Address (6 octets) + Address Type (1 octet) + Data Length (4 octets) + Data (variable) + Mask Length (4 octets) + Mask (variable) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x26 - Client Scan Filter Clear command/response + + Command parameters: Client Interface (4 octets) + Filter Index (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x27 - Client Scan Filter Enable command/response + + Command parameters: Client Interface (4 octets) + Enable (1 octet) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x28 - Client Configure MTU command/response + + Command parameters: Connection ID (4 octets) + MTU (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x29 - Client Connection Parameter Update command/response + + Command parameters: Address (6 octets) + Min Interval (4 octets) + Max Interval (4 octets) + Latency (4 octets) + Timeoutl (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x2a - Client Set Scan Parameters command/response + + Command parameters: Scan Interval (4 octets) + Scan Window (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x2b - Client Setup Multi Advertising command/response + + Command parameters: Client ID (4 octets) + Min Interval (4 octets) + Max Interval (4 octets) + ADV Type (4 octets) + Channel Map (4 octets) + TX Power (4 octets) + Timeout (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x2c - Client Update Multi Advertising command/response + + Command parameters: Client ID (4 octets) + Min Interval (4 octets) + Max Interval (4 octets) + ADV Type (4 octets) + Channel Map (4 octets) + TX Power (4 octets) + Timeout (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x2d - Client Setup Multi Advertising Instance command/response + + Command parameters: Client ID (4 octets) + Set Scan Response (1 octet) + Include Name (1 octet) + Include TX Power (1 octet) + Appearance (4 octets) + Manufacturer Data Length (4 octets) + Manufacturer Data (variable) + Service Data Length (4 octets) + Service Data (variable) + Service UUID Length (4 octets) + Service UUID (variable) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x2e - Client Disable Multi Advertising Instance command/response + + Command parameters: Client ID (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x2f - Client Configure Batchscan command/response + + Command parameters: Client ID (4 octets) + Full Max (4 octets) + Trunc Max (4 octets) + Notify Threshold (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x30 - Client Enable Batchscan command/response + + Command parameters: Client ID (4 octets) + Scan Mode (4 octets) + Scan Interval (4 octets) + Scan Window (4 octets) + Address Type (4 octets) + Discard Rule (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x31 - Client Disable Batchscan command/response + + Command parameters: Client ID (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + + Opcode 0x32 - Client Read Batchscan Resports command/response + + Command parameters: Client ID (4 octets) + Scan Mode (4 octets) + Response parameters: <none> + + In case of an error, the error response will be returned. + Notifications: Opcode 0x81 - Client Register notification @@ -2031,6 +2203,100 @@ Notifications: Notification parameters: Status (4 octets) Handle (4 octets) + Opcode 0xa0 - Client Configure MTU notification + + Notification parameters: Connection ID (4 octets) + Status (4 octets) + MTU (4 octets) + + Opcode 0xa1 - Client Filter Configuration notification + + Notification parameters: Action (4 octets) + Client ID (4 octets) + Status (4 octets) + Filter Type (4 octets) + Available Space (4 octets) + + Opcode 0xa2 - Client Filter Parameters notification + + Notification parameters: Action (4 octets) + Client ID (4 octets) + Status (4 octets) + Available Space (4 octets) + + Opcode 0xa3 - Client Filter Status notification + + Notification parameters: Enable (4 octets) + Client ID (4 octets) + Status (4 octets) + + Opcode 0xa4 - Client Multi Advertising Enable notification + + Notification parameters: Client ID (4 octets) + Status (4 octets) + + Opcode 0xa5 - Client Multi Advertising Update notification + + Notification parameters: Client ID (4 octets) + Status (4 octets) + + Opcode 0xa6 - Client Multi Advertising Data notification + + Notification parameters: Client ID (4 octets) + Status (4 octets) + + Opcode 0xa7 - Client Multi Advertising Disable notification + + Notification parameters: Client ID (4 octets) + Status (4 octets) + + Opcode 0xa8 - Client Congestion notification + + Notification parameters: Connection ID (4 octets) + Congested (1 octet) + + Opcode 0xa9 - Client Configure Batchscan notification + + Notification parameters: Client ID (4 octets) + Status (4 octets) + + Opcode 0xaa - Client Enable Batchscan notification + + Notification parameters: Action (4 octets) + Client ID (4 octets) + Status (4 octets) + + Opcode 0xab - Client Batchscan Reports notification + + Notification parameters: Client ID (4 octets) + Status (4 octets) + Report Format (4 octets) + Num Reports (4 octets) + Data Length (4 octets) + Data (variable) + + Opcode 0xac - Client Batchscan Threshold notification + + Notification parameters: Client ID (4 octets) + + Opcode 0xad - Client Track ADV notification + + Notification parameters: Client ID (4 octets) + Filter Index (4 octets) + Address Type (4 octets) + Address (6 octets) + State (4 octets) + + Opcode 0xae - Server Indication Sent notification + + Notification parameters: Connection ID (4 octets) + Status (4 octets) + + Opcode 0xaf - Server Congestion notification + + Notification parameters: Connection ID (4 octets) + Congested (1 octet) + Bluetooth Handsfree Client HAL (ID 10) ====================================== -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
