-----Ursprüngliche Nachricht----- Von: linux-bluetooth-owner@xxxxxxxxxxxxxxx [mailto:linux-bluetooth-owner@xxxxxxxxxxxxxxx] Im Auftrag von Andrei Emeltchenko Gesendet: Dienstag, 11. Februar 2014 08:13 An: Marcel Holtmann Cc: Viswanatham, RaviTeja; bluez mailin list (linux-bluetooth@xxxxxxxxxxxxxxx) Betreff: Re: Hi All, On Mon, Feb 10, 2014 at 10:35:24AM -0800, Marcel Holtmann wrote: > Hi Ravi, > > > I am working on Ubuntu 12.04 with a Bluetooth 3.0 +HS + wifi combo > > USB dongle. > > > > I want to reach a data transfer speed of up to 24 Mbit/s. > > > > My Questions: Does Bluez support high speed data transfer rates up > > to > > 24 Mbit/s (Bluetooth 3.0+HS) ? > > > > If it does, is there any user configuration involved to achieve that? > > What other requirements need to be met? Does, Bluetooth enables AMP > > function to communicate 802.11n channel to support high speed or it > > has to be configure with any other drivers? > > > > I am new to Linux a detail explanation would be really appreciated. > > Thank you in advance for your support. > > we do support Bluetooth HS operation. However your WiFi device needs > to be exposed as AMP Controller. Most WiFi hardware needs a special > driver to expose itself as AMP Controller. There is no generic driver > for > mac80211 subsystem in the kernel. Some devices have AMP Controller implemented in firmware. I was using Marvell SD8787, probably newer Marvell devices also works. You may check drivers/bluetooth/btmrvl_main.c to see how HCI dev_type HCI_AMP is assigned. Best regards Andrei Emeltchenko Hello Andrei Emelchenko, Thanks for replying me. I would like to know some more information about the Bluetooth dongle. As you said the Marvell SD8787 is kind of a SoC chipset. Is there any USB Bluetooth device available in the market which supports out of the box. I am running 3.11 kernel and I already build the Marvell option inside the kernel. Is there any dongles available in the market which supports full AMP. If not are there any other possibilities to fix the Marvell driver with the existing dongle. Please any hints as I am working on ARM board I need to fix the USB Bluetooth device which can transfer with high speed. Thanks in advance. Regards, Raviteja -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
