https://bugzilla.kernel.org/show_bug.cgi?id=58481 Timo Mueller <timo.mueller@xxxxxxxxxxxx> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |timo.mueller@xxxxxxxxxxxx --- Comment #2 from Timo Mueller <timo.mueller@xxxxxxxxxxxx> 2013-05-22 11:52:21 --- Hi Tobias, have you installed the wilink chip's firmware? The shared transport driver tries to load it and it times out. You can download the firmware for the PandaBoard ES here: http://processors.wiki.ti.com/images/1/18/TIInit_7.6.15-XTAL.zip On successful install you should get an output like this: [ 129.701354] (stc): st_register(4) [ 129.705230] (stc): chnl_id list empty :4 [ 129.709686] (stk) : st_kim_start [ 129.819732] (stk) :ldisc_install = 1 [ 129.874694] (stc): st_tty_open [ 129.878082] (stk) :line discipline installed [ 129.883117] (stk) :TIInit_7.6.15.bts And in uim: uim:@ main uim:begin polling... uim:poll broke due to event 10(PRI:2/ERR:8) uim:read 1 from install uim:@ st_uart_config uim: signal received, opening /dev/ttyO1 uim:@ set_baud_rate uim:set_baud_rate() done uim:Setting speed to 3000000 uim:@ read_command_complete uim: Command complete started uim:@ read_hci_event uim: read_hci_event uim:Command complete done uim:Speed changing to 3000000, 1 uim:@ set_custom_baud_rate uim:Installed N_TI_WL Line displine uim:begin polling... uim:poll broke due to event 10(PRI:2/ERR:8) uim:read 0 from install uim:@ st_uart_config uim:Un-Installed N_TI_WL Line displine uim:begin polling... I hope this helps. Best regards, Timo -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
