On one machine I'm running "l2test -w" (listen and send), and on the
other "l2test -u" (connect and receive). Neither specifies
authentication or encryption. The machines are not paired.
Attempting to connect does this:
> HCI Event: Vendor (0xff) plen 2 [hci0] 260.582938
81 00 ..
> HCI Event: Connect Request (0x04) plen 10 [hci0] 260.583838
Address: 00:80:C1:53:22:09 (OUI 00-80-C1)
Class: 0x6e0100
Major class: Computer (desktop, notebook, PDA, organizers)
Minor class: Uncategorized, code for device not assigned
Networking (LAN, Ad hoc)
Rendering (Printing, Speaker)
Capturing (Scanner, Microphone)
Audio (Speaker, Microphone, Headset)
Telephony (Cordless telephony, Modem, Headset)
Link type: ACL (0x01)
< HCI Command: Accept Connection Requ.. (0x01|0x0009) plen 7 [hci0] 260.583951
Address: 00:80:C1:53:22:09 (OUI 00-80-C1)
Role: Master (0x00)
> HCI Event: Command Status (0x0f) plen 4 [hci0] 260.584890
Accept Connection Request (0x01|0x0009) ncmd 1
Status: Success (0x00)
> HCI Event: Role Change (0x12) plen 8 [hci0] 260.736918
Status: Success (0x00)
Address: 00:80:C1:53:22:09 (OUI 00-80-C1)
Role: Master (0x00)
> HCI Event: Vendor (0xff) plen 2 [hci0] 260.751930
81 01 ..
> HCI Event: Vendor (0xff) plen 7 [hci0] 260.752839
82 00 00 00 01 15 00 .......
> HCI Event: Connect Complete (0x03) plen 11 [hci0] 260.753839
Status: Success (0x00)
Handle: 21
Address: 00:80:C1:53:22:09 (OUI 00-80-C1)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
< HCI Command: Read Remote Supported... (0x01|0x001b) plen 2 [hci0] 260.754059
Handle: 21
> HCI Event: Command Status (0x0f) plen 4 [hci0] 260.754839
Read Remote Supported Features (0x01|0x001b) ncmd 1
Status: Success (0x00)
> HCI Event: Read Remote Supported Features (0x0b) plen 11 [hci0] 260.758922
Status: Success (0x00)
Handle: 21
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Hold mode
Sniff mode
Park state
Power control requests
Channel quality driven data rate (CQDDR)
SCO link
HV2 packets
HV3 packets
u-law log synchronous data
A-law log synchronous data
CVSD synchronous data
Paging parameter negotiation
Power control
Transparent synchronous data
Broadcast Encryption
Enhanced Data Rate ACL 2 Mbps mode
Enhanced Data Rate ACL 3 Mbps mode
Enhanced inquiry scan
Interlaced inquiry scan
Interlaced page scan
RSSI with inquiry results
Extended SCO link (EV3 packets)
EV4 packets
EV5 packets
AFH capable slave
AFH classification slave
3-slot Enhanced Data Rate ACL packets
5-slot Enhanced Data Rate ACL packets
Sniff subrating
Pause encryption
AFH capable master
AFH classification master
Enhanced Data Rate eSCO 2 Mbps mode
Enhanced Data Rate eSCO 3 Mbps mode
3-slot Enhanced Data Rate eSCO packets
Extended Inquiry Response
Secure Simple Pairing
Encapsulated PDU
Erroneous Data Reporting
Non-flushable Packet Boundary Flag
Link Supervision Timeout Changed Event
Inquiry TX Power Level
Extended features
< HCI Command: Read Remote Extended F.. (0x01|0x001c) plen 3 [hci0] 260.759016
Handle: 21
Page: 1
> HCI Event: Command Status (0x0f) plen 4 [hci0] 260.759841
Read Remote Extended Features (0x01|0x001c) ncmd 1
Status: Success (0x00)
> HCI Event: Read Remote Extended Features (0x23) plen 13 [hci0] 260.762922
Status: Success (0x00)
Handle: 21
Page: 1/1
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Secure Simple Pairing (Host Support)
< HCI Command: Remote Name Request (0x01|0x0019) plen 10 [hci0] 260.763059
Address: 00:80:C1:53:22:09 (OUI 00-80-C1)
Page scan repetition mode: R2 (0x02)
Page scan mode: Mandatory (0x00)
Clock offset: 0x0000
> HCI Event: Vendor (0xff) plen 2 [hci0] 260.763835
81 00 ..
> HCI Event: Command Status (0x0f) plen 4 [hci0] 260.764868
Remote Name Request (0x01|0x0019) ncmd 1
Status: Success (0x00)
> HCI Event: Vendor (0xff) plen 2 [hci0] 260.777930
81 01 ..
> HCI Event: Remote Name Req Complete (0x07) plen 255 [hci0] 260.794921
Status: Success (0x00)
Address: 00:80:C1:53:22:09 (OUI 00-80-C1)
Name: dovahkiin.mtv.corp.google.com-0
@ Device Connected: 00:80:C1:53:22:09 (0) flags 0x0000
20 09 64 6f 76 61 68 6b 69 69 6e 2e 6d 74 76 2e .dovahkiin.mtv.
63 6f 72 70 2e 67 6f 6f 67 6c 65 2e 63 6f 6d 2d corp.google.com-
30 04 0d 00 01 6e 0....n
> HCI Event: Link Key Request (0x17) plen 6 [hci0] 260.809885
Address: 00:80:C1:53:22:09 (OUI 00-80-C1)
< HCI Command: Link Key Request Negat.. (0x01|0x000c) plen 6 [hci0] 260.809912
Address: 00:80:C1:53:22:09 (OUI 00-80-C1)
> HCI Event: Command Complete (0x0e) plen 10 [hci0] 260.810820
Link Key Request Negative Reply (0x01|0x000c) ncmd 1
Status: Success (0x00)
Address: 00:80:C1:53:22:09 (OUI 00-80-C1)
> HCI Event: Vendor (0xff) plen 7 [hci0] 262.835921
82 00 01 00 01 15 00 .......
> HCI Event: Disconnect Complete (0x05) plen 4 [hci0] 262.836826
Status: Success (0x00)
Handle: 21
Reason: Remote User Terminated Connection (0x13)
@ Device Disconnected: 00:80:C1:53:22:09 (0) reason 3
I was expecting this to work - why the Link Key Request?
Scott
--
Scott James Remnant | Chrome OS Systems | keybuk@xxxxxxxxxx | Google
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
