On Thursday 06 December 2012 04:20 PM, Anderson Lizardo wrote:
Hi Ajay,
On Tue, Dec 4, 2012 at 2:49 PM, Ajay <ajay.kv@xxxxxxxxxxxxxxxxxx> wrote:
SLAVE side
root@test:/home# hcitool -i hci0 cmd 0x08 0x0008 03 02 01 06 \
$(perl -e 'print "00 " x 28')
root@test:/home# hciconfig hci0 leadv
Hcidump shows ..
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Data (0x08|0x0008) ncmd 1
status 0x00
< HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1
HCI Event: Command Complete (0x0e) plen 4
LE Set Advertise Enable (0x08|0x000a) ncmd 1
status 0x00
HCI Event: LE Meta Event (0x3e) plen 19
LE Connection Complete
status 0x00 handle 64, role slave
bdaddr 00:02:72:D6:AB:AD (Public)
ACL data: handle 64 flags 0x02 dlen 11
ATT: Read By Group req (0x10)
start 0x0001, end 0xffff
type-uuid 0x2800
Your slave device is not answering to the Read By Group request,
therefore the master side is disconnecting due to timeout.
I suggest you first try using gatttool on the master side to connect
to the slave, and run "primary" to see if it is processing GATT
requests.
The bluez log from the slave side should help (I assume you are
running BlueZ on the slave side).
Regards,
Hi,
I tried "gatttool -i hci0 -b <remote bdaddr> --primary " on
master side ,which creates LE link and very next moment disconnects .
How can i change the security level of the link to medium?. still
struggling to pair the device (atleast "smp just works") ) . Is my
kernel supportive (3.2.5)
few lines of code from the kernel (/net/bluetooth/smp.c)
int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level)
{
struct hci_conn *hcon = conn->hcon;
struct smp_chan *smp = conn->smp_chan;
BT_DBG("conn %p hcon %p level 0x%2.2x", conn, hcon, sec_level);
if (!lmp_host_le_capable(hcon->hdev))
return 1;
if (sec_level == BT_SECURITY_LOW)
return 1;
if (hcon->sec_level >= sec_level)
return 1;
if (hcon->link_mode & HCI_LM_MASTER)
if (smp_ltk_encrypt(conn))
goto done;
if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->pend))
return 0;
smp = smp_chan_create(conn);
if (hcon->link_mode & HCI_LM_MASTER) {
struct smp_cmd_pairing cp;
build_pairing_cmd(conn, &cp, NULL, SMP_AUTH_NONE);
smp->preq[0] = SMP_CMD_PAIRING_REQ;
memcpy(&smp->preq[1], &cp, sizeof(cp));
smp_send_cmd(conn, SMP_CMD_PAIRING_REQ, sizeof(cp), &cp);
Every time on LE create connection process i ,smp_conn_security()
getting called from hci layer .
But if(host_le_capable(hcon->hdev))
return 1;
condition returns without even checking the security level . so kindly
show me the right way..
--
Thanks & Regards
AJAY KV
GlobalEdge software Ltd
8892753703
begin:vcard
fn:AJAY KV
n:;AJAY
tel;cell:8892753703
version:2.1
end:vcard
