On 08/22/2012 11:13 AM, Vinicius Costa Gomes wrote:
Hi,
On 12:07 Wed 22 Aug, Ajay KV wrote:
On 08/17/2012 12:27 PM, Anderson Lizardo wrote:
Hi Ajay
[your emails to BlueZ mailing list may be getting blocked because you
are using HTML. Please fix that on your mail client. Also remember to
not top-post]
On Fri, Aug 17, 2012 at 7:34 PM, Ajay KV<ajay.kv@xxxxxxxxxxxxxxxxxx> wrote:
Thanks for your reply. i have 2 dongles of different made (iogear and
chirago) . "Hciconfig hci0 lestates" gives this following result
Supported link layer states:
[...]
Here my issue is to know whether (connected mode + advertising
mode) is possible at a time . Once A is connected to B (initiator), i
could not able to enable advertise in A (getting command disallowed ) , so
that device C is not getting the connectable advertising packets on
scanning.
I could not see any reason to get "command disallowed" when enabling
LE adv. Did you try changing dongle combinations to make sure it is
not some hardware issue?
Regards,
Hi,
i could not able to figure it out yet , why its showing
this error " command disallowed" . Here im using fedora 13 with
kernel 2.6.39 . i tried with both dongles , iogear and cirago . But
the result is same. i dont think that its something wrong with
kernel version, as we uses hci commands (hciconfig hci0 leadv )
that directly talks with controller . please clear this issue..
Most probably the controller is in the page scan or inquiry scan state.
Try doing 'hciconfig hci0 noscan', before enabling advertising.
Cheers,
Hi,
Still not working , getting the same old error. i just want to know ,
whether my dual-mode dongle allows this operation or not (Advertising
mode+ connected mode)
Regards,
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
