On 08/22/2012 12:01 PM, Anderson Lizardo wrote:
Hi Ajay,
On Wed, Aug 22, 2012 at 7:18 PM, Ajay KV<ajay.kv@xxxxxxxxxxxxxxxxxx> wrote:
First of all, sorry for my ignorance . Following are the steps i did
in my test case. i am also using dual mode dongles , so as you said spec
is not allowing us to do this operation
[snip]
I remembered that the Core spec mentions that it is not required for a
controller to support more than one connection. Maybe it is the case
for the dongles you have? In this case, the controller will not allow
to send connectable advertising because of the active connection.
(sorry, I could not find the section of the spec that mentions this)
If you close the connection, are you able to run "hciconfig hci0
leadv" again on "A"?
Regards,
Hi ,
yes , exactly the moment the connection get terminates , i could able
to enable advertise again. The intresting point is that during connected
mode , even advertise disable is also giving the same "command
disallowed" error.
regards
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html