Hi Antti, * Antti Julku <antti.julku@xxxxxxxxx> [2011-08-19 15:38:04 +0300]: > > Hi Marcel, > > On 08/10/2011 04:55 PM, ext Marcel Holtmann wrote: > >I recap, then fast connectable mode is something that is controlled by > >one or multiple profiles. So this is just really a on/off switch. And if > >we support it then all profiles should just use the same settings for > >it. So far correct? Or do we need different values/parameters on a per > >profile basis? > > All profiles use same settings currently, probably no need to have > different configurations for profiles. > > > > >If I just assume the above, then we need a set of commands that can > >configure the settings of fast connectable mode. And that is done once > >when we start bluetoothd. After that it is really just toggle on and > >toggle off. And bluetoothd internally can keep a reference count for > >that. > > > >And then it makes sense to do the same for LE and BR/EDR. It is either > >on or off. Just the initial parameter set for LE is configured > >differently. > > So one command which switches fast connectable on/off for both BR > and LE? And two for configuration? Maybe something like this? > > Set Fast Connectable Command > ============================ > > Command Code: 0x0001F > Controller Index: <controller id> > Command Parameters: Enable (1 Octet) > Return Parameters: Status (1 octet) > > Configure BR Fast Connectable Mode Command > ========================================== > > Command Code: 0x00020 > Controller Index: <controller id> > Command Parameters: Page_scan_type (1 Octet) > Page_scan_interval (1 Octet) > Return Parameters: Status (1 octet) > > Configure LE Fast Connectable Mode Command > ========================================== > > Command Code: 0x00021 > Controller Index: <controller id> > Command Parameters: Adv_interval (1 Octet) > ...and maybe some other settings if needed > Return Parameters: Status (1 octet) Can't both command be merged into one? LE Advertisement could be a scan type. But this won't work if we need more settings for LE. Gustavo -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
