Hi Arun, On Tue, Mar 15, 2011, Arun Raghavan wrote: > I've been trying to set up PulseAudio to be able to switch the A2DP sink > dynamically between SBC and MPEG modes. I've got this working now [1], but I > did face one problem on the bluez side. When sending a reconfigure request, the > request always goes to the SEID that was used previously (=> always to the SBC > SEID). Trying to reconfigure for MPEG therefore results the headset returning > an error. I'm not very familiar with how this is supposed to work, but the > patch following this mail seems to work (I can now switch back and forth > between SBC and MPEG modes). It basically forces figuring out what remote SEP > to talk to while reconfiguring. > > Is this the right approach? I'm not sure about the places where you set the value to NULL, but the place in close_cfm which you remove isn't acceptable as such. It was originally created to fix the issue reported in this thread: http://marc.info/?l=linux-bluetooth&m=129190286303247&w=2 Only a fix which doesn't break the use-case reported there can be accepted upstream. FWIW, the commit that introduced the fix is de96fcd8. Johan -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
