Re: [PATCH] Bluetooth: qca: fix invalid device address check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 4/25/2024 9:28 PM, Johan Hovold wrote:
Hi Janaki,

On Thu, Apr 25, 2024 at 08:31:50PM +0530, Janaki Ramaiah Thota wrote:

Apologies for the delay. As of now, we have observed the following
values in the upstream firmware files for default BD addresses.
We will confirm ASAP if there are any changes.

---------------------------------------------------------
|   BDA	        |      Chipset		               |
---------------------------------------------------------	
| 20 00 00 10 80 39  | WCN3988 with ROM Version 0x0200	|
---------------------------------------------------------	
| 00 08 74 12 80 39  |  WCN3988 with ROM Version 0x0201	|
---------------------------------------------------------	
| 00 07 64 21 90 39  |  WCN3990			        |
---------------------------------------------------------

Thanks a lot for these. I see now that the default Trogdor address Doug
reported (39:98:00:00:5a:ad) appears to comes from the fw too:

	$ od -x crnv32.bin | grep 5aad

	0000020 0000 0000 5aad 0000 3998 0008 0008 0000

which means that patch I sent this morning should be all that is needed
for those machines at least.


Yes correct, it will work for Trogdor

Can you please confirm that all the WCN39xx have OTP storage for an
address that an OEM can choose to use?


We are checking with internal FW team, will confirm on it.

If that's not the case then we could simplify things by always marking
their addresses as invalid, but I assume that they all have address
storage.

Johan

-Janakiram




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux