Re: [PATCH] Bluetooth: qca: fix invalid device address check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Doug and Janaki,

On Mon, Apr 22, 2024 at 10:50:33AM -0700, Doug Anderson wrote:
> On Tue, Apr 16, 2024 at 2:17 AM Johan Hovold <johan+linaro@xxxxxxxxxx> wrote:

> > As Chromium is the only known user of the 'local-bd-address' property,
> > could you please confirm that your controllers use the 00:00:00:00:5a:ad
> > address by default so that the quirk continues to be set as intended?
> 
> I was at EOSS last week so didn't get a chance to test this, but I
> just tested it now and I can confirm that it breaks trogdor. It
> appears that trogdor devices seem to have a variant of your "default"
> address. Instead of:
> 
> 00:00:00:00:5a:ad
> 
> We seem to have a default of this:
> 
> 39:98:00:00:5a:ad
> 
> ...so almost the same, but not enough the same to make it work with
> your code. I checked 3 different trogdor boards and they were all the
> same, though I can't 100% commit to saying that every trogdor device
> out there has that same default address...
> 
> Given that this breaks devices and also that it's already landed and
> tagged for stable, what's the plan here? Do we revert? Do we add the
> second address in and hope that there aren't trogdor devices out in
> the wild that somehow have a different default?

This patch is currently queued for 6.10 so there should be time to get
this sorted.

My fallback plan was to add further (device-specific) default addresses
in case this turned out to be needed (e.g. this is what the Broadcom
driver does).

I assume all Trogdor boards use the same controller, WCN3991 IIUC, but
if you're worried about there being devices out there using a different
address we could possibly also use the new
"qcom,local-bd-address-broken" DT property as an indicator to set the
bdaddr quirk.

We have Qualcomm on CC here so perhaps Janaki, who should have access to
the documentation, can tell us what the default address on these older
controllers looks like?

Janaki, are there further default addresses out there that we need to
consider?

Perhaps "39:98" can even be inferred from the hardware id somehow (cf.
bcm4377_is_valid_bdaddr())?

Doug, could you please also post the QCA version info for Trogdor that's
printed on boot?

Johan




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux