El lun, 04-10-2010 a las 14:35 +0200, Uwe Kleine-KÃnig escribiÃ: > Hello Pacho, > > On Mon, Oct 04, 2010 at 12:25:46PM +0200, Pacho Ramos wrote: > > > I would say this was because of double authentication request, but it > > > seems it is not the case, actually ssp doesn't seems to be used at all > > > here so this must be something else, maybe you should try this: > > > > > > http://thread.gmane.org/gmane.linux.bluez.kernel/7256 > > > > > > > Thanks but, how should I try to apply that patch? Looks like > > net/bluetooth/rfcomm/core.c is not present on bluez-4.72 sources > I guess this is a patch to apply to your kernel, not bluez. > > Best regards > Uwe > Downstream affected reported told me it's still failing even with the patch: http://bugs.gentoo.org/show_bug.cgi?id=327705#c19 Attached is the new hcidump output Thanks a lot for your help :-)
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Link Key Request (0x17) plen 6
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
> HCI Event: Command Complete (0x0e) plen 10
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Max Slots Change (0x1b) plen 3
> HCI Event: Read Remote Supported Features (0x0b) plen 11
< ACL data: handle 12 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x005a scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x005a scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x005a flags 0x00 clen 0
> HCI Event: Remote Name Req Complete (0x07) plen 255
> ACL data: handle 12 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 12 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 48
< ACL data: handle 12 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x005a flags 0x00 result 0 clen 4
MTU 48
< ACL data: handle 12 flags 0x02 dlen 24
L2CAP(d): cid 0x005a len 20 [psm 1]
SDP SSA Req: tid 0x0 len 0xf
pat uuid-16 0x111e (Handsfree)
max 65535
aid(s) 0x0000 - 0xffff
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 12 flags 0x02 dlen 52
L2CAP(d): cid 0x0040 len 48 [psm 1]
SDP SSA Rsp: tid 0x0 len 0x2b
count 38
cont 02 00 39
< ACL data: handle 12 flags 0x02 dlen 26
L2CAP(d): cid 0x005a len 22 [psm 1]
SDP SSA Req: tid 0x1 len 0x11
pat uuid-16 0x111e (Handsfree)
max 65535
aid(s) 0x0000 - 0xffff
cont 02 00 39
> ACL data: handle 12 flags 0x02 dlen 52
L2CAP(d): cid 0x0040 len 48 [psm 1]
SDP SSA Rsp: tid 0x1 len 0x2b
count 38
cont 02 00 13
< ACL data: handle 12 flags 0x02 dlen 26
L2CAP(d): cid 0x005a len 22 [psm 1]
SDP SSA Req: tid 0x2 len 0x11
pat uuid-16 0x111e (Handsfree)
max 65535
aid(s) 0x0000 - 0xffff
cont 02 00 13
> ACL data: handle 12 flags 0x02 dlen 31
L2CAP(d): cid 0x0040 len 27 [psm 1]
SDP SSA Rsp: tid 0x2 len 0x16
count 19
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10004
aid 0x0001 (SrvClassIDList)
< uuid-16 0x111e (Handsfree) uuid-16 0x1203 (Audio) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
aid 0x0006 (LangBaseAttrIDList)
< uint 0x656e uint 0x6a uint 0x100 >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x111e (Handsfree) uint 0x101 > >
aid 0x0100 (SrvName)
str "Hands-Free unit"
aid 0x0311 (SuppFeatures)
uint 0x18
cont 00
< HCI Command: Authentication Requested (0x01|0x0011) plen 2
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Auth Complete (0x06) plen 3
< HCI Command: Set Connection Encryption (0x01|0x0013) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Number of Completed Packets (0x13) plen 5
< ACL data: handle 12 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x005a scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Disconn Complete (0x05) plen 4
< HCI Command: Create Connection (0x01|0x0005) plen 13
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Link Key Request (0x17) plen 6
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
> HCI Event: Command Complete (0x0e) plen 10
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Max Slots Change (0x1b) plen 3
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Read Remote Supported Features (0x0b) plen 11
< ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Command Status (0x0f) plen 4
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< HCI Command: Authentication Requested (0x01|0x0011) plen 2
> HCI Event: Remote Name Req Complete (0x07) plen 255
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Auth Complete (0x06) plen 3
< HCI Command: Set Connection Encryption (0x01|0x0013) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Disconn Complete (0x05) plen 4
< HCI Command: Reset (0x03|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 4
Attachment:
signature.asc
Description: This is a digitally signed message part
