Re: L2CAP unknown options

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ville,

* Ville Tervo <ville.tervo@xxxxxxxxx> [2010-07-27 12:07:23 +0300]:

> Hi,
> 
> I found following problem with bluetooth-next-2.6.
> 
> Kernel disconnects if remote device replies with "unknown options"
> result code. I guess in that case a new config req should be sent
> without unknown option. I didn't check the spec yet.
> 
> The remote device is Nokia 9300.
> 
> 2010-07-27 11:44:07.364827 < ACL data: handle 11 flags 0x02 dlen 10
>     L2CAP(s): Info req: type 2
> 2010-07-27 11:44:07.365337 < HCI Command: Remote Name Request
> (0x01|0x0019) plen 10
>     bdaddr 00:12:37:F0:F1:77 mode 2 clkoffset 0x0000
> 2010-07-27 11:44:07.367793 > HCI Event: Command Status (0x0f) plen 4
>     Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> 2010-07-27 11:44:07.384797 > HCI Event: Max Slots Change (0x1b) plen 3
>     handle 11 slots 5
> 2010-07-27 11:44:07.406820 > ACL data: handle 11 flags 0x02 dlen 12
>     L2CAP(s): Info rsp: type 2 result 1
>       Not supported
> 2010-07-27 11:44:07.406849 < ACL data: handle 11 flags 0x02 dlen 12
>     L2CAP(s): Connect req: psm 1 scid 0x0040
> 2010-07-27 11:44:07.431790 > HCI Event: Remote Name Req Complete
> (0x07) plen 255
>     status 0x00 bdaddr 00:12:37:F0:F1:77 name 'vt-m'
> 2010-07-27 11:44:07.433780 > HCI Event: Number of Completed Packets
> (0x13) plen 5
>     handle 11 packets 2
> 2010-07-27 11:44:07.474801 > ACL data: handle 11 flags 0x02 dlen 16
>     L2CAP(s): Connect rsp: dcid 0x0042 scid 0x0040 result 1 status 2
>       Connection pending - Authorization pending
> 2010-07-27 11:44:07.668818 > ACL data: handle 11 flags 0x02 dlen 16
>     L2CAP(s): Connect rsp: dcid 0x0042 scid 0x0040 result 0 status 0
>       Connection successful
> 2010-07-27 11:44:07.668851 < ACL data: handle 11 flags 0x02 dlen 23
>     L2CAP(s): Config req: dcid 0x0042 flags 0x00 clen 11
>       RFC 0x00 (Basic)
> 2010-07-27 11:44:07.669814 > ACL data: handle 11 flags 0x02 dlen 12
>     L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> 2010-07-27 11:44:07.669840 < ACL data: handle 11 flags 0x02 dlen 18
>     L2CAP(s): Config rsp: scid 0x0042 flags 0x00 result 0 clen 4
>       MTU 672
> 2010-07-27 11:44:07.675794 > HCI Event: Number of Completed Packets
> (0x13) plen 5
>     handle 11 packets 2
> 2010-07-27 11:44:07.682822 > ACL data: handle 11 flags 0x02 dlen 19
>     L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 3 clen 5
>       Failure - unknown options
>       RFC QoS 0f 00 42

Actually the 9300 stack is broken here, it should only send the unknown
options that were in the ConfiqReq, i.e, only the RFC. But that doesn't
change the fact that we have a regression.

> 2010-07-27 11:44:07.682843 < ACL data: handle 11 flags 0x02 dlen 12
>     L2CAP(s): Disconn req: dcid 0x0042 scid 0x0040
> 2010-07-27 11:44:07.693823 > ACL data: handle 11 flags 0x02 dlen 12
>     L2CAP(s): Disconn rsp: dcid 0x0042 scid 0x0040

-- 
Gustavo F. Padovan
http://padovan.org
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux