Hi, > On running <hcitool scan> in one terminal and simultaneously viewing > results using <hcidump> on the other terminal, I had a very > interesting observation that has made me quite perplexed. I would > really like you to help me out. >r > The observation is that suppose a device(Nokia N73) with MAC address > M1 is discoverable, the response to Inquiry Request command is often a > set of multiple Inquiry Result each with the same MAC address M1. This is totally normal! It's related to how bluetooth inquiry process works. The device doing the inquiry is jumping at a rate of 1600 hops/s (If I'm not wrong) over 32 channels and te device in inquiry scan is jumpung at a way lower rate. So the radio might, and actually will, find the same device multiple times per scan cycle. hcidump shows you exactly which information is going on between the radio and the stack. The advantage of getting multiple results are many: * RSSI depends on scanning channel: not all the channel have the same noise level, so averaging RSSI with multiple results is way more accurate than just one rssi value from one only channel. * Faster response: hcitool inq will only show you the results once it has solved both name and completed scanning, but actually it's getting the results way before. I had been able to expermient dicovering a new radio in less than 1 second so I could take action, and this can only be done if you get multiple results per scan cycle. Off course it requires more inteligence on you side. You need to filter which results are new and which are not, but that is damn easy, and you would be loose applications if it was otherwise. Manuel -- Manuel Francisco Naranjo Software Department Argentina Wireless Cables Inc www.aircable.net cel: +5493412010019 skype: naranjomanuelfrancisco -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html