Marcel Holtmann написав(ла): > Hi Oleg, > >> Asus P535 details on http://www.kaa.org.ua/asus-p535/hardware.html >> Bluetooth chip BCM2045B2 connected to the pxa internal usb host. >> >> I think this chip need firmware, because it is can only search >> How I can upload firmware to the this chip? > > no, the chip needs a HCI Reset call. Load btusb with reset=1. And send > the output of /proc/bus/usb/devices for this dongle. > > Regards > > Marcel > > -- > To unsubscribe from this list: send the line "unsubscribe > linux-bluetooth" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html I am load modprobe btusb reset=1 Content of /proc/bus/usb/devices: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 22/900 us ( 2%), #Int= 1, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev= 2.06 S: Manufacturer=Linux 2.6.27 ohci_hcd S: Product=PXA27x OHCI S: SerialNumber=pxa27x C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=2045 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM2045A S: SerialNumber=000000000000 C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) When I try establish bnep connection: localhost ~ # ifconfig bnep0 10.9.0.2 SIOCSIFFLAGS: Cannot assign requested address So when I enable bluetooth in Windows Mobile localhost ~ # ifconfig bnep0 10.9.0.2 work's fine :) This is a Windows bluetooth log: 15:16:55:512 RadioInitPreLoad Start 15:16:55:553 Using USB, no PreLoad code 15:16:55:579 RadioInitPreLoad End 15:16:56:351 RadioInitPostLoad Start 15:16:56:365 BRCM_PostLoad TOP 15:16:56:385 Send_HCI_Read_BDaddr was successful 15:16:56:399 BRCM2045CFG2RAMmain(USB) TOP 15:16:56:412 Sending HCI_DOWNLOAD_MINIDRIVER 15:16:57:946 Writing config binary image through HCI_WRITE_RAM commands 15:16:57:971 Loaded config data file \Windows\BCM2045B2_002.002.011.0131.0001.hcd, length=9459 bytes 15:16:57:985 Using USB, and using an external .hcd config file 15:16:57:000 target_ram_addr = 0x00:08:5c:70 15:16:57:014 launch_ram_addr = 0x00:08:8b:d8 15:16:57:039 HCIVSWriteRAM(addr=0x70:0x5c:0x08:0x00, nbytes=139) 15:16:57:067 HCIVSWriteRAM(addr=0xf7:0x5c:0x08:0x00, nbytes=255) 15:16:57:106 HCIVSWriteRAM(addr=0xf2:0x5d:0x08:0x00, nbytes=255) 15:16:57:136 HCIVSWriteRAM(addr=0xed:0x5e:0x08:0x00, nbytes=255) 15:16:57:165 HCIVSWriteRAM(addr=0xe8:0x5f:0x08:0x00, nbytes=255) 15:16:57:195 HCIVSWriteRAM(addr=0xe3:0x60:0x08:0x00, nbytes=255) 15:16:57:226 HCIVSWriteRAM(addr=0xde:0x61:0x08:0x00, nbytes=255) 15:16:57:257 HCIVSWriteRAM(addr=0xd9:0x62:0x08:0x00, nbytes=255) 15:16:57:287 HCIVSWriteRAM(addr=0xd4:0x63:0x08:0x00, nbytes=255) 15:16:57:317 HCIVSWriteRAM(addr=0xcf:0x64:0x08:0x00, nbytes=255) 15:16:57:347 HCIVSWriteRAM(addr=0xca:0x65:0x08:0x00, nbytes=255) 15:16:57:377 HCIVSWriteRAM(addr=0xc5:0x66:0x08:0x00, nbytes=255) 15:16:57:429 HCIVSWriteRAM(addr=0xc0:0x67:0x08:0x00, nbytes=255) 15:16:57:459 HCIVSWriteRAM(addr=0xbb:0x68:0x08:0x00, nbytes=255) 15:16:57:489 HCIVSWriteRAM(addr=0xb6:0x69:0x08:0x00, nbytes=255) 15:16:57:553 HCIVSWriteRAM(addr=0xb1:0x6a:0x08:0x00, nbytes=255) 15:16:57:654 HCIVSWriteRAM(addr=0xac:0x6b:0x08:0x00, nbytes=255) 15:16:57:729 HCIVSWriteRAM(addr=0xa7:0x6c:0x08:0x00, nbytes=255) 15:16:58:767 HCIVSWriteRAM(addr=0xa2:0x6d:0x08:0x00, nbytes=255) 15:16:58:890 HCIVSWriteRAM(addr=0x9d:0x6e:0x08:0x00, nbytes=255) 15:16:58:973 HCIVSWriteRAM(addr=0x98:0x6f:0x08:0x00, nbytes=255) 15:16:58:208 HCIVSWriteRAM(addr=0x93:0x70:0x08:0x00, nbytes=255) 15:16:58:384 HCIVSWriteRAM(addr=0x8e:0x71:0x08:0x00, nbytes=255) 15:16:58:607 HCIVSWriteRAM(addr=0x89:0x72:0x08:0x00, nbytes=255) 15:16:58:737 HCIVSWriteRAM(addr=0x84:0x73:0x08:0x00, nbytes=255) 15:16:59:972 HCIVSWriteRAM(addr=0x7f:0x74:0x08:0x00, nbytes=255) 15:16:59:025 HCIVSWriteRAM(addr=0x7a:0x75:0x08:0x00, nbytes=255) 15:16:59:126 HCIVSWriteRAM(addr=0x75:0x76:0x08:0x00, nbytes=255) 15:16:59:155 HCIVSWriteRAM(addr=0x70:0x77:0x08:0x00, nbytes=255) 15:16:59:372 HCIVSWriteRAM(addr=0x6b:0x78:0x08:0x00, nbytes=255) 15:16:59:447 HCIVSWriteRAM(addr=0x66:0x79:0x08:0x00, nbytes=255) 15:16:59:590 HCIVSWriteRAM(addr=0x61:0x7a:0x08:0x00, nbytes=255) 15:16:59:621 HCIVSWriteRAM(addr=0x5c:0x7b:0x08:0x00, nbytes=255) 15:16:59:670 HCIVSWriteRAM(addr=0x57:0x7c:0x08:0x00, nbytes=255) 15:16:59:711 HCIVSWriteRAM(addr=0x52:0x7d:0x08:0x00, nbytes=255) 15:16:59:752 HCIVSWriteRAM(addr=0x4d:0x7e:0x08:0x00, nbytes=255) 15:17:00:807 HCIVSWriteRAM(addr=0x48:0x7f:0x08:0x00, nbytes=222) 15:17:00:930 HCIVSWriteRAM(addr=0xd8:0x8b:0x08:0x00, nbytes=52) 15:17:00:949 HCI_WRITE_RAM commands done 15:17:00:964 Sending HCI_LAUNCH_RAM command 15:17:00:984 HCI_LAUNCH_RAM was successful 15:17:00:499 BRCM2045CFG2RAMmain() END, config data downloaded successfully 15:17:00:519 Send_HCI_Read_BDaddr was successful 15:17:00:534 Read BDAddr [00:1a:92:ab:e3:31] from the registry 15:17:00:554 Send_Broadcom_Write_BD_ADDR was successful 15:17:00:574 Send_HCI_Read_BDaddr was successful 15:17:00:599 HCIWriteChannelClassificationMode : bResult=1 15:17:00:614 HCIVSSetSleepModeParam() Mode=USB with HOST_WAKE,HostIdleThreshold=10, HCIdleThreshold=10, BT_WAKE active HIGH, HOST_WAKE active HIGH 15:17:00:628 USB AutoSleepOnSuspend=1, USB Resume Timeout = 3 15:17:00:650 HCIVSSetSleepModeParam(mode=5, timeout=3000ms): bResult=1 15:17:00:665 BRCM_PostLoad : RadioInitConfigureAudio set, configuring 2045 audio 15:17:00:686 HCIVSWriteSCOPCMIntParameters(0,2,0,0,0) : bResult=1 15:17:00:705 HCIVSWritePCMDataFormatParameters(0,0,2,3,1) : bResult=1 15:17:00:721 HCIVSWriteSCOTimeSlot(SCO Time Slot=0) 15:17:00:741 HCIVSWriteSCOTimeSlot : bResult=1 15:17:00:754 BRCM_PostLoad : RadioInitEnableCoexistence set, configuring 2045 BT/WLAN coexistence 15:17:01:774 HCIVSWriteCollaborationMode(1,1,0xcb7fbdb0,10) : bResult=1 15:17:01:787 BRCM_PostLoad END 15:17:01:801 RadioInitPostLoad End -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
